Mark0

Sure do, I have a Babyseat in a 32 GTR they have the standard clips on the parcel shelf. if not the holes should be there and you can put the clip on.

And one more in the rain Well the front tyres are about 40% so you recon leave em let em scrub out then get 245 all around, Does anyone have a 32 GTR with 18" x 9.5" +12 What size tryes do you have on them and if they are either in line with the guards or under on the back are they 245 ?

Had mine about 6 months now in my GTR its like driving a pulsar its that smooth

LOL love it get the car fresh off the boat...hmm what to do ..I know some 8k launches lol nice car mate.

R32 GTS-T Just dont race every bogan that pulls up beside you, cause one day it will be a cop

Here are a few bad pics, its raining here today so I will get some good side on ones so you can see the gap better. And Also can anyone tell me the law in regards to the tyres sticking out past the guards, is it the furthest part of the wheels in my case the edge of the tyre and the lip of the guards ? as my tre edge is about 1cm past the lip of the guard but not further then the flared guard itself, I think 245s would brind it in line with the lip.

yer will do they sit out a bit more then I anticipated, maybe because of the wide tyres.I was also thinking of camber on the front and rears.

Guys I have just fitted 18" 9.5" +12 TE37 to my 32 GTR, the only issue is the tyres are 265 (they were on them) Now the car does scrub a bit on the left front when i hit a big bump, otherwise its seems ok. What has anyone done to fix this or whats the best solution ? Raise the suspention? Take the plastic inners off and roll the guards or put 245s on the front. Thanks Gys I will post somes pics of the car as soon as I have them (i have tein super streets in my car)

Ok might take it to ac place, cheers

Already done a globe test there is no power.

it could be a ground ? The clutch (or what i call the cluctch) on the compressor does not engage, there are no noises at all its not doing anything.

If anyone had a bit of knowledge on how ac compressors work it would be handy. I have a Friends Toyota Hilux we are trying to get the AC to work, Basically we have looked at what we can but the compressor does not turn on (i cant hear that normal thud when it turns on and its not engaging the clutch on the compressor). We have checked the wiring to the compressor, it have one wire running into it and thats it, it has an earth running out of it and into the body which is secure. I have tested this wire and there is no power, I have gone back to where the cable goes into the firewall and it has no power, inside the car the ac light comes on, and there is power at the socket for the ac fuse. I am guessing the breakdown loes after the fuse box but before the wire comes through the firewall in the engine. We have also run a cable direct from the battery to the compressor where the wire goes on but it did not make a difference, any one help or any ideas. I can supply pics if needed.

Bump...good luck with sale..the price of the car makes my missus happy she wants a 34 GTR

Well I am not 100% sure i think I need the backing plates as they will be a one off for me, the person making them used to have the R32GTR Plates but does not anymore.

If anyone has a set of old brake pads off a R32 GTR can I get them off you, cheers. I am getting some made up (custom) and I need them for the template and I cant pull mine out as my partner drives the gtr all day. Cheers.

Ok Thanks so the heat has not made your glue come unstuck, clark foam and rubber have glue for the foam but its highly flamable, but I guess that goes for most glue.

hey did you get the foam with the glue on it or buy gle, if you bought it what did you get that will stick with the heat, i wanted to get the 0.5 ml stuff/ cheers

I am off onsite for work..will drop in to clark rubber on the way

nice job guys I have posted mine on here aswell, I have not gone all the way to the ground on the left , but pretty close I will possible put insulation on it if it ade a big difference, but I need to get my hole cute under my pods, i have a few things to get around in my car and my steel skills aint that good :|

Rubber pipe from autobarn

All Finished, could have made it perfect if I wanted to take the time, left it stainless aswell, but its good enought for me.

its easier that way so that will win out lol I am not sure if I can put it on as I dont have the hole yet, but it weouls still sueck air from the engine as it always has its not a fully enclosed box, just likethe ones u can buy of unique autosport.

Will put pics up soon i am contemplating if I should leave it stainless or paint it black.

I have just made myself a stainless pod box its all come together nicley the only thing is i will need to put a hole under the filters and get a pipe from the front bar into that hole for cold air. Has anyone cut a hole under the filters in a 32GTR and if so any tips on where to cut and what to use (grinder i guess)

that writing was added to the video, that vids been around for years...still good though.