Pattey21

Hey guys just got my hands on a nistuned z32 ecu for my r33 and wondering who can tune in the act. Will be just to tidy up a stock 33 10psi with fmic and 3" as its my daily. Cheers

Hey guys looking at getting some wheels for my r33 18 x 9 +21 front 10 +26 rear. Planning to run 235 and 255 same type of tyre all round. Is running the same wheel offset and tyre size the best for a r33 or a bit wider at the rear with a bit more track (16mm total) okay. Cheers

If not sold i got next dibs on nistune

cheers for the quick replies

Stock body ftw. Unfortunately this is a losing situation, if you raise your car it will look ridiculous if you keep it how it is you will slowly destroy it. Unless you drive like its a low car even though its not low, it can be done just take the right angles nice and easy when faceing driveways, speed bump etc

Hey guys i have a sweet RS*R 3.5" catback which is great but it is way too quiet (for me) it seems a waste to get a whole new catback and i dont want to hack up the current one. The culprit is the rear muffler flows great but too quiet, basically i want to get a this(link below) to replace the rear muffler. Rather than cut off the old one and weld this on, i want to get to get this one made up to mate with the flange after the diff. So if need be i can bolt the quiet one back on. Can anyone recommend a place in canberra who can do 3.5" exhaust work. Cheers Patrick http://www.ebay.com.au/itm/Apexi-N1-Universal-Muffler-3-5inch-Nissan-Toyota-Mitsubishi-Subaru-Mazda-Hyundai-/271051187182?pt=AU_Car_Parts_Accessories&hash=item3f1be8e3ee

interested in cat back and sell the dump to gtsttrk. where are you situated?

paypal fee?

hey guys about two months ago i broke my throwout pinion/ball so had to get the box off to replace it. upon re-assembly i cleaned the throwout fork(without removing the thrust bearings grease), and used graphit powder on the shaft. now just the otherday when i release the clutch it geels a bit gritty like the throwout fork is not sliding smoothly. i mainly notice it in first gear when releasing a little slower. has anyone experienced this before? i think maybe i need to put more graphite powder on it or the throwout bearing needs more grease, or is it something else. cheers

awesome thanks for the reply

hey guys my car was sitting on a flat surface and noticed the drivers side was a bit higher than the passengers. after measuring eyebrow height the drivers side is about 4-5 mm higher than the passengers. also drivers side camber is -2.1 where as the passengers is -1.35. is the.negative camber difference also causing the height difference. i plan to get new control arm camber bushes the ones that have a camber adjustment and adjustable castor rods and coilovers the suspension is pretty much stock it has potenza shocks thats about it. is this something i should be worried about?

still for sale?

yeah diff oil was changed 10,000k ago. is there anyway to tell if its a front or rear as i would like to buy the bearing kit. cheers patrick

cheers ive thrown the car from side to side when i throw it right releasing weight off the right hand side the noise dissapears. so i assume its a rhs wheel bearing.ive got stock bushes cheers.

cheers richard, will do

think one of my rear wheel bearings is f**ked as a get a whine/hum from the rear from 60kph plus. any recommendations where to get it done?

Hey guys, Ive noticed recently as soon as i hit 60kph i start getting a humming/whining noise from the rear, it is there whether in gear or not so i know its not the gearbox, and doesnt change if under acceleration or deceleration. When i get to about a 100 i cant really hear it anymore i think mostly because the road/tyre noise is louder. Is there anyway of distinguishing whether its the wheel bearings or diff. Cheers Patrick

hey guys a have a few spots in my chassis rails where the have been crushed a bit by axel stands. does anyone on here know of a repairer. cheers patrick

hey jimmy you have a datsun badge on your boot yeah? if so i followed you on sat night watching the skids.

awesome thanks for the feedback guys

hey guys looking into new wheels for my r33 s2. wanting to go as wide and agressive in offset as possible without sacrficing handling too much. any info on max width/offset and is it better for the r33 to be staggered or same width and offset all round. cheers patrick

hey guys looking for a catback either 3 or 3.5" for my 33. been reading through some search results and besides db rating and "personal oponions" cant seem to find any specs on cfm/flow rating or systems that are true 3". looking at reinhard 001, blitz nur, trust pe2, hks silent high power and apexi n1. any/all info on these or back to back testing/ comparisons would be great. cheers patrick

hey guys found a two small spots on my door where paint is missing. anyone on here or anyone have the hook up to get it done at a good price. cheers patrick

as per the title qfter one rhf caliper hardline. can p/u if in ACT or will pay for postqge. cheers patrick

hey man how much for rhf cqliper hardline sent to ACT 2905 (should fit in an envolope)