Jump to content
SAU Community

CAY570

Members
  • Posts

    7
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by CAY570

  1. Got Fengshui Master to recomend in Kuching?

  2. Having this problem myself. not boosting over 0.5 bar. You guys found what was the causes?
  3. nope, i triple check all four rims are 17x9jj off+15. even tyre size are the same 255/40R17. just that the rear tyres are newer than the front and i measured the tyres width with a ruler, the rear is wider around 0.5cm.
  4. Problem solved. Swapped the original rear tyres and rim back from the front. The rear tyres and rims looks a bit wider than the front. Thank you all.
  5. the best bet now i think is do a bleed on the systems and see how it goes. Need to refer back to the manual for the full procedures. anybody knows which page? i did turn the ign on and unplug the two terminal on the g sensor and 4wd light pop out right after. plug it in the light still there and need to turn ign off and on then it's gone.
  6. Hi All, Recently had a problem with my front torque gauge where the needle is not moving and showing torque distribution to the fwd. So i assume it's running on rwd. The funny thing is that there's no 4WD error lights on and i check the rear attesa ecu, there's no red led light blinking, i have check the g sensor and the indicator is ok, not in red color, check the attesa rear reservoir when the ignition on, fluids on the right level. when i switch on the ignitiion on i can hear the attesa pump is working. i recently changed the gear box oil and front diff oil. gear box oil i used redline heavy shockproof. front diff i sue the same oil as well. but after reading through this forum or gtro found that shockproof oil doesnt do well in diff, so i changed to castrol manual transmission oil, and problem still there. so i am really confuse as where the problem lies or is the front torque gauge not working? othes gauges in the console working fine though. Please help. Thanks
×
×
  • Create New...