Jump to content
SAU Community

SkylinerGTR

Members
  • Posts

    28
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by SkylinerGTR

  1. Hey mate interested in the radiator for my r32 gtr. Is this a chinese job? What condition is it in and where are you located? cheers
  2. Hey mate are these still available?
  3. Hey mate do you have a good Rb26 clutch fan hub? How much posted to Brisbane 4178
  4. Sau name: SkylinerGTR Car: r32 GTR Circuit: Mallala, SA Time: 1.22.2 Engine: stock, 3" exhaust, nistune ecu, 15 psi boost. Suspension: king springs bilstein shocks otherwise stock. Tyres: 255/40/17 toyo r1r Brakes: stock 36 degree heat plenty left in it only did about 10 hard laps and only taking it just over 7000 rpm
  5. Hey mate let me know if you want to separate the adjustable suspension control arms front and rear.
  6. Cheers for the reply mate and the info about whiteline, i will look into that. Just to be clear I am getting a wheel alignment, just chasing some information regarding what camber, caster and toe settings to tell them to aim for. Hoping to find someone who has had success in finding a good compromise between track and street duties. Thanks
  7. Hi I'm just hoping for some input with the wheel alignment settings on my r32 GTR. I'm looking for the best compromise for track days, hillclimbs as well as street duties - mainly through the hills. Iv just put on 255/40 17 toyo r1r tyres all round on 33 GTR rims. Suspension is lowered king springs and bilstein shocks. I'm unsure of spring rates but it is fairly stiffly sprung. Everything else is stock suspension wise. It sits at 345mm front and rear measured from the gaurd to the centre of the rim. I realize I will be limited by not having adjustable arms for camber etc. But just want some tried settings to aim for. The car has about 250 rwkw and a fairly tight LSD ( recently tightened up ) currently it chews the inside of all the tyres but the alignment could be anywhere at the moment. I remember reading a thread from sydneykid about this but can't seem to find it now. Anyone who has some experience with this I would like to hear your opinions. Cheers Ryan
  8. Hey looking for a good pair of r34 n1 turbos. Pay up to $1000. 0438248379 Cheers
  9. I'm told 33 and 32 units are the same. Is this your understanding too? Mines a 32. How much posted to Adelaide 5353?
  10. Hey mate how much for the pressure switch out of the attesa pump posted to adelaide 5353?
  11. Wanted r34 Gtr n1 turbos. Must b in good condition pay up to $1000, 0438248379 Cheers
  12. Hey mate can you do $1000 posted to Adelaide? If so I'll grab them. Pm me
  13. Hi all. Looking for the pressure switch from the attesa hydraulic pump above the rear diff.in an r32 gtr. Or the whole hydraulic pump unit. If u got one pm me or msg on 0438248379 cheers
  14. Hi all looking for a pressure switch from the attesa hydraulic pump in a r32 Gtr. Or the whole attesa pump unit. U know the one above the diff. If u got one pm me or msg me on 0438248379. Cheers
  15. Hi all looking for a pressure switch from the attesa hydraulic pump in a r32 Gtr. Or the whole attesa pump unit. U know the one above the diff. If u got one pm me or msg me on 0438248379. Cheers
  16. I was thinking of heading there tonight for the first time. Is anyone else going?
  17. Damn if u were in sa they would b mine
  18. Hey mate im after the pressure switch from the attesa hydraulic pump above the diff. If u got it how much posted to Adelaide?
  19. Hey mate I'm just after the pressure switch from the atessa ets hydraulic pump. If u got it how much posted to Adelaide ?
  20. Where are u mate? Do u know how much postage would b if u r not in Adelaide?
  21. Hey mate how much for atessa hydraulic pump setup? Do u know if the car 4wd was working properly ie. No 4wd light on in dash?
  22. Hi mate any shaft play in the turbos? Where are u located? Postage to Adelaide? Thanks.
×
×
  • Create New...