Veilside R33

Price drop $500

Hey Mick. Yes, still available, but not willing to sell separately.

No, unfortunately not.

Hey all, Have a bunch of aftermarket parts from my 32GTR, in preparation for it’s rotisserie respray: Full 3.5inch turbo back exhaust. Not sure of brand, but great note and I think the section from cat to extractors is titanium (not 100% sure, though): $500 HKS fully adjustable coil overs (pics coming soon, just need to give them a clean): $750 2 x Garrett ball bearing 2860-5’s in near new condition (only a few thousand km’s): $900 each. Complete R32GTR Brakes (non-brembo), including slotted rotors (DBA, apparently): $500 per pair Koyorad Radiator: $400 (retails for $690) and only a few thousand km’s old. ABS Module and mount: $300 Also have a bunch of other parts, so if you’re after something specific, let me know and I’ll see if I have it. Welcome to view anytime. Parts located in Red Hill.

Hey Ricky, Happy to get the seats from storage and takes some pics for you. What, specifically, would you like pictures of?

http://www.knoxautocarpets.com.au/nissan/skyline-r-32-1990-1993/

Good to know. Thanks. Meanwhile, assembly time.

So quiet on here these days. Bought a new one off eBay for $1100.

Hey all, Does anyone know someone local with a rotisserie cradle? Acuform have one which I have access to, but it's looking like taking a while before it'll be available and am hoping to get moving sooner. Thanks, Andrew.

Bump $450

It evaporates almost instantly (2-3 seconds). For vertical areas, you need to use a little more. With flat areas the few seconds of contact is sufficient to achieve the result, but on vertical areas I found it needed a few seconds of being poured over with it to get the temp low enough to crack the bond. It’s also not as dangerous as, I think, most of us assume. I managed to get a bit in my hair and on my hands and nothing happened at all. It’s effectively just super cold, not toxic, so as long as it doesn’t remain in contact for long, nothing happens.

I went through this with my 32(GTR) and found it unreliable and slow. Went down to BOC gases (Australian gas chain), got 9 litres of liquid nitrogen and a container for something like $46, then used that. One of the most fun things you can do with a car. You just pour it out, everything starts cracking immediately and you'll see it start popping up on its own, then you just put it in a bag. Easy, quick, and you get to play with liquid nitrogen. One of those strange situations where you're like "so, I don't even need to give you my ID... you're just giving me liquid nitrogen to do whatever I want with and it's cheap?... OK, that seems like something which needs to be way better regulated, but I'll take it". Had about a litre left over, so I poured it over some bananas and let my niece and nephew smash them with a hammer. Good clean fun.

Thanks Duncan. Car will be a semi-daily (dry weather days), but would like the setup to be capable of competing in Targa events and similar. Power figure will be circa 600kw ATW on pump98, so the suspension will need to be capable of keeping the car heading roughly in the right direction (appreciate that my right foot is primarily responsible for this). Is there anyone you know of who could advise on specific products? My challenge at the moment is knowing which brands to use for which specific areas, to build a holistic package. i.e. are Nismo control arms preferable to Ikeya Formula control arms etc (and the same questions for each part of the setup).

Hey all, Is there anyone locally who is highly regarded in building and advising on GTR suspension set-ups or am I going to have to work with someone in Sydney? I'm about to put my 32 on the rotisserie and while the subframe is out, I'm going to pull it apart completely and rebuild/have someone else rebuild all suspension and handling elements, before re-uniting it with the chassis. I'll most likely have MCA build the coilovers (have them on my GC8 and am happy with them) but it's all the other stuff I'm seeking advice on (bracing, bushes, brackets, swaybars, links etc). Recommendations? Thanks. Andrew.

Bump. $480

Price drop to $550.

Hi all, Carbon fibre rear underspoiler [boot lip] for R32. Very good condition. Recently removed before new paint goes on the car. Not sure of the manufacturer, but it’s very light. Will need a little goo remover to remove the previous adhesive, but looks like it’ll come off pretty easily. $200. Located in ACT, but happy to post at buyers expense.

Hi all, I have my R32GTR seats up for sale. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). The seats don’t have the centre trim in the head rest (you can see what I mean in the pics) because they've been re-trimmed to match the Nismo covers which I’ve already sold. Will also hang on to the seat belt clips as I need them for the new seats, but that's pretty standard. No idea about shipping costs, so buyers will need to look into and organise this for themselves. Collection will be from 2603 in Canberra. Price: $650 Let me know if you have any other questions. Andrew.

@Duncan So the unique thing about the GT-C nuts is that they don't use a socket around the perimetre, like most nuts. It's an open end and the tool locks to the inside. The standard rays Duralumin nuts are too wide and can't pass through the holes to access the thread. @Jordy32 Thanks. Saw those and will order them if I can't find an aftermarket alternative. They're perfectly sufficient, but I'd rather something aftermarket as a first preference (like Kics, Work, etc). Good to know they're there as a fall-back if need be, though.

Hi all, I have a hard question to answer and hoping someone here might know. While the GTR is dormant, I'm making a few additions to my WRX. I've just picked up a set of GT-C's which are off being restored, but the wheel nut situation is giving me hepatitis. GT-C's are famous for being a unique wheel nut fitment and I'm trying to find an alternative option than tracking down original GT-C nuts. I've heard that Work RC nuts are potentially compatible https://www.jdmconcept.com.au/part/work/rc-nuts This would be a double benefit as they'd match the WRC Blue of the Rex. To my eye, they don't look like they'd fit. Does anyone know if they would be compatible? I'd rather not order them, then find out they don't fit.... like I just did with a set of Rays standard nuts. Alternatively, if anyone knows of any other nuts which would fit, that would be helpful, too. Any thoughts would be appreciated. Andrew.

Hi all, I had these posted in a combined thread with Nismo seat covers, but the covers are sold, so to avoid confusion I'm listing the seats on their own. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). The seats won't come with the plastic cover in the cut-out (at neck height) because they went with the Nismo covers> This could easily be re-trimmed. Will also hang on to the seat belt clips and rails as I need them for the new seats, but that's pretty standard. No idea about shipping costs, so buyers will need to look into and organise this for themselves. Collection will be from 2603 in Canberra. Price is $650. Let me know if you have any other questions. Andrew.

Richard snapped up the covers; Seats still for sale.

Yep, can do. What time will you be there?

My turn again.... Posted this in the main for sale thread, but can't hurt to post it here, too: R32GTR Seats and Genuine Nismo Seat Covers I have my R32GTR seats up for sale. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). If someone buys the seats on their own, they won't come with the centre trim in the head rest (you can see what I mean in the pics) because they've been re-trimmed to match the Nismo covers and they need to go with the Nismo covers. However, if someone ends up buying the covers separately and has the trim piece on their own R32 seats, then I'll ask for that as part of the sale and send it on to you when I get it. It's not ideal, but it's the best solution I can think of. Will also hang on to the seat belt clips as I need them for the new seats, but that's pretty standard. I also have genuine Nismo seat covers (front and rear) which look amazing and are in as new condition (have only been on for a few thousand km's). They're of the fit and quality you'd expect from Nismo i.e. exceptional. I'd prefer to sell them together (seats and covers) for $1,800 but if you only want one or the other then the seats are $1,000 and the covers are $800. Let me know if you have any questions. Andrew.

R32GTR Seats and Genuine Nismo Seat Covers Hi all, I have my R32GTR seats up for sale. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). If someone buys the seats on their own, they won't come with the centre trim in the head rest (you can see what I mean in the pics) because they've been re-trimmed to match the Nismo covers and they need to go with the Nismo covers. However, if someone ends up buying the covers separately and has the trim piece on their own R32 seats, then I'll ask for that as part of the sale and send it on to you when I get it. It's not ideal, but it's the best solution I can think of. Will also hang on to the seat belt clips as I need them for the new seats, but that's pretty standard. I also have genuine Nismo seat covers (front and rear) which look amazing and are in as new condition (have only been on for a few thousand km's). They're of the fit and quality you'd expect from Nismo i.e. exceptional. I'd prefer to sell them together (seats and covers) for $1,800 but if you only want one or the other then the seats are $1,000 and the covers are $800. No idea about shipping costs, so buyers will need to look into and organise this for themselves. Collection will be from 2603 in Canberra. Let me know if you have any other questions. Andrew.