tN^

Yea still abit confusion to that one. Most say 1.75mm pitch one or two said it was 1.5mm

Hopefully this would help someone down the track. FRONT PIN CLIPS CROSS SPRING- 41218-12U26 (same as R34 GTR, G35, Z33) FRONT REBUILD KIT- 41120-12U25 -(same as R34 GTR, G35, Z33) REAR PIN CLIPS CROSS SPRING -44218-12U26 - (same as R34 GTR, G35, Z33) REAR REBUILD KIT- 44120-12U25 -(same as R34 GTR, G35, Z33) FRONT R33 GTR CALIPER BOLT SPEC (DIFFERENT TO R34): M12X1.75 30MM 8.8 TENSIL REAR CALIPER BOLT SPEC: M10 1.5MM 30MM 8.8 TENSIL Brought the stuff from Z1 motorsport in the states.

I got r33 gtst calipers currently on there now, and the current rims just manage to clear with 5mm slip on. Brembos might be wider yet still?

nah, im just to figure of my ssr sp1 would fit with the new brembo brakes. so without actually trying to find someone with a gtr and putting my wheels on, if i could deduce that if a stock s15/s14 rims fit onto an r33 gtr then i'll should be all sweet. i kinda suspect i'll have to get some gktech extended wheel nuts in the end.

so with spacers then?

will the stock r33 gtst wheels fit onto an r33 gtr with brembo?

bm57 brake master cyclinder with ABS

Anyone have access to nissanfast? Could someone get the part number for the r33 brembo brake pad retainer and pins? I want to see if they're same as on v35 skylines Found a rebuilding kit for 1/4 of the price from the states but they for v35 skyline/350z. Read they're same for r33 brembo. Can anyone confirm?

^thanks anyone know if the r33 gtst brake caliper bolts same as the r33 brembo's?

hey guys i bought a set of r33 brembo calipers and it didn't come with any pins/clips or spring plates where can i get a set for front and rear calipers simialr to this: http://www.ebay.com....mMakeTrack=true also i where can i get it rebuilt with new seals and tested before i go ahead putting them on my car (one day) thanks TN (also is should there a metal backing plate? or you usually get that with pads? i can't remember)

hey guys i bought a set of r33 brembo calipers and it didn't come with any pins. where can i get a set for front and rear with clips and that metal tongs. simialr to this: http://www.ebay.com.au/itm/151699964616?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true also i where can i get it rebuilt with new seals and tested before i go ahead putting them on my car (one day) thanks TN (also is should there a metal backing plate? or you usually get that with pads? i can't remember)

Wanted: 1:18 Autoart r34 z tune.

After R32/33/34 rear braided brake lines. Drop me a SMS on 0401440001

i like to add to this post by saying: -when fitted there's gap. the gap is fine. dont try to tighten it more as it will x-thread the hole. if you do cross thread it, then it CAN be retapped with a helicoil.

got the hole retapped. $35bux sweet! as for the braided brake line. its correct. it seals on the olive and theres a gap.

its not a restrictor. you need it to seal between the caliper and the braided line

according to this post http://www.skylinesaustralia.com/forums/topic/330303-diy-hel-braided-brake-line-install/ there's a gap. but doesn't seem right to have a gap

Installing the the gk tech braided brake line. over tighten and cross threaded the braided brake line on the front R33 caliper. can it be retapped? also should there be a few mm gap when tight between the caliper and the bottom of the braided brake line insert bolt. (hence why i over tighten it)

WIN! i was gonna wait for the next group buy, but after reading 10pages of 'nothing has happen' i got these instead.

Just ordered 5 for all the boys down here! Cheers dude hoodies look AWESOME! But where is the R31!!!!!!!!

group buy again!

10mm do it!

why not put spacers on to clear them brakes stupid head

count me in for next group buy

HI AFTER A stock r33 castor rod with nolathane bushes or after market bushes installed. thanks will pay for shipping. 0401440001