poo32

Boost tee price/pics please

Would you have a spare tps? If so pm me details. Cheers

bump

looking for an rb20det tps

looking for an rb20det tps

as the title states folks, i need a throtle possition sensor through me an offer. cheers

Still selling? Im after the whole centre console and the plastic guage souround where the head light switches are ect

Sorry justs read ya post properly will have to pass this time

Where are you located? Im interested in the 235s.

As far as I can tell its all been cleaned, I only came across the tps situation when I had idel issues

Sounds like ya might have done ya head gasket, my old ca did the exact same thing, check ya over flow bottle for exhaust fumes

Yea thats it, mine rooted, checked it with a mates, got rid of both codes lol

Throtle possition sensor, its on the side of the throtle body

Sorry for the necro but has anyone worked out the a/t controll issue as I have the same problem :s

Just checked fault codes, I got 43 tps guess im up for a new one lol and 54 a/t controll problem is its manual :s any ideas on that one

Hey guys so I found oil in my tps (rb20det) I cleaned it w contact cleaner and the only reading I can get from it is 13v or 10.5v. The multi meter is set on the v- with 3 dots under the dash at 20, im a noob with multi meters lol. I know tps's have been coverd many times but I think mines a special case lol.

You will have a hard time selling it as a whole, im keen on the tps, what did u want for that?

The catch can is fine now lol, It was the bloody bov, bastard was leaking. It still spikes so to speak on inital start up but then it settles to 950 like a champ. Cheers for the replys guys.

Anything? im pulling my hair out gah

Ive plumbed it properly now, plenum side to pcv, exh side to can, can to intake, now its hunting when I pull up, ie decelerate to idle. It pulls fine, turbo spools everything is good except the idle. Im thinking cas or someyhing

Yea its plumbed into the pcv, the can had a breather on it thats why I stuffed around with it lol. I just read an article about pcv valves on rb's and the fact there only open at idle/vacumm oh well lear from ya mistakes ay. Anyone with ideas on the idle situation?

Defenantly not blow by lol its sucking not blowing the dip stick

Oh ok, so the pcv has nothing to do with the catch can? Also the idle things starting to annoy me :s the tps isnt working properly, it will read 10.8v or 13.4 nothing in between. Oh yea and it had engine oil inside it.

hey guy first post so gimme a break lol, I just got a 32 gtst w rb20,ok first thing is I plumbed the catch can properly ie t'd the pipes on the rocker covers and ran that to the can and the other pipe to the pcv, now its sucking air from where the dip stick is, to the point its still sucking when the engines turned off I know vaccume is good but geese, also its having trouble idleing, it revs erraticly sometimes and pops and farts, it has an exhaust leak at the dump would that do it? Any help will be appreicated, cheers.