HungarySkyline

Hey all iv had my skyline for about 8 months now gone to a few drifting events here and there Skid pan etc. Iv noticed nobody really drives the R32 or R33 as much as the Silvias last week i went to an event at eastern creek, me and another person were the only skyline owners out there compared to the 25-30 Silvia drifters. Iv driven some Silvia's and i dont understand the hype, i see them blow something every time i go out there and its mainly on water, iv seen body panels go for considerably cheaper then the skyline, but motor wise, the SR20 seems to cost alot more then lets say the rb20, and they put out similar power. but that's just me. What you guys think?

Hey guys, iv been running my car for a while with a rb25 turbo, and i recently heard something about welding a nipple onto the inter cooler piping and running the vacuum line from the turbo is a better idea then running off the intake manifold plenum. thanks

yeah i might just swap the actuator over, im guessing that i might have used the wrong vacuum lines also.

hey all, i put on my rb25 turbo today, replaced the gaskets for the exhaust manifold and dump, ran the car without my turbosmart manual controller. It ran stabily at 5psi then used the controller and turned it a few clicks boost wouldnt increase, i think i got to around 17 clicks nothing happened i put the spring and ball into the controller and it just spikes to 15-16 psi til i let off so it wouldnt increase. Not sure whats the problem is, I didnt swap actuators across as i had the mbc. anyone have experience with the turbo change? cheers

sorry guys posted in wrong section lol.

hey all, i put on my rb25 turbo today, replaced the gaskets for the exhaust manifold and dump, ran the car without my turbosmart manual controller. It ran stabily at 5psi then used the controller and turned it a few clicks boost wouldnt increase, i think i got to around 17 clicks nothing happened i put the spring and ball into the controller and it just spikes to 15-16 psi til i let off so it wouldnt increase. Not sure whats the problem is, I didnt swap actuators across as i had the mbc. anyone have experience with the turbo change? cheers

Still looking for a turbo guys cheers

hey all wanting to buy an RB25 turbo, as my previous one crapped itself. Message me and ill get back to you asap. Cheers

Hey all, as title states im looking for bigger turbo than the stock rb20 one, wanting to acheive 200rwkw so not sure if rb25 turbos will help, if anyones selling something like that let me know, also looking for after market ecu, not exactly sure what to use beside power fc or nistune, if anyone is selling that or has something similar to that also, id like to know haha. Ill get back to you asap. Cheers

hey all looking for a bit of an upgrade on my rb20det and im looking to replace the injectors with stock gtr ones, let me know where and how much. Western Sydney Area. Thanks

hey all was looking to spend around $100-$200 on a EBC let me know what you got. must be in Sydney area. thanks

Yeah i intend to pull the sensor out tomorrow and replace, hopefully goes well. Thanks

hey all, iv had a problem with my knock sensor, it retards the ign timing sometimes on idle( between 1-15 mostly sits around 7 degree), but when driving the car felt normal. I turned on the car today heated it up idled fine, i started to drive and timing dropped to 2-5 degree under load, it even hit 0 it couldnt be driven, but on idle it was okay. I ran it through a scanner and it came up with the code 34 knock sensor earlier today, but after today im not sure if it would doing this from just the sensor being off, i feel like it might have skipped a tooth on the belt. Anyone had the knock sensor problem before?

Hey all, wanting to upgrade my rb20 turbo to the rb25, i need the elbow as well. Looking to spend around the $150-200 mark, depending on condition. Cheers

Hey all i decided to go upgrade my gearbox to the 25 box and i now have to get the custom tailshaft, Does anyone know roughly how much it would cost? cheers