vspec2

Well to make a long story short, I had a take my timing belt off to re-align it as it was loose and had jumped some gears (dont ask!!!). No engine damage phew!!! Anyway I took off the timing belt, but stupid me turned the crank pulley without the belt being on so the cams are all out of alignment. Can someone tell me what the correct position of the inlet, exhaust cam gear and crank pulley should be? I want to make sure when I align it with the timing markers that everything is in sync inlet and exhaust cam gears are both set to 0 degrees. cheers

Selling a new Tomei GTR RB26 sump baffle kit. Retails for $450 at Unique Auto sports Stops oil starvation, a must for track days or any GTR owner who wants peice of mind that their car will not be starved of oil when taking corners or going hard. Sellling for $280 (must sell) PM or email hksgtr@gmail.com

Done worked a treat! thanks guys

Thanks for the heads up!

Hi Just a quick question, for you guys who have installed a GTR gearbox with a pull type clutch. I've just put in a new twin plate clutch, because its a pull type the thrust bearing needs to sit on the pressure plate. My question is, should I put the thrust bearing on the pressure plate first and once the gearbox is back on, attach the clutch fork to the thrust bearing (I assume this is the correct way) or have the thrust bearing on the clutch fork first and once the gearbox is in then push the thrust bearing in the pressure plate (if this is possible). cheers

whats the model number? cheers

Can any one comment on the performance/reliability compare to the Bosch 044 fuel pump cheers

Looking for a new/used (in good condition) Bosch 044 fuel pump. pm me with the price cheers

Hi I got 18x10 blitz rims with an offset of +22 with 10cm dish on my R32 GTR..

What size tyres?

not sure, you have to consider they each cost $500 new. What would be your best offer?

Hi got 3 Pirelli P-Zero's with 90% tread. 245/45/17 if your interested.

Wanted cheap used 18" tyres. Need 255 or 265 x 18" 35 series tyres. The set must be the same size. Price Dependent on condition. please pm me cheers

I run 18x10 with an offset of +22

GT1 Canberra Muz Will try n' find out.

*** selling my Nismo Twin Plate clutch on ebay $450 start price **** http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...item=2481839257

now forsale on ebay

bump

cheers buddy

Hi I've just taken my engine out of my car and I dropped it out from the bottom with the gear box attached. The plenum was a pain to take out as it doesn't clear the hicas components when you drop it down. Its so much easier if you have access to a hoist. If you need help let me know as i live in Canberra too. cheers

*** Selling my Nismo Gmax Twin Plate on Ebay Start price $450 ******* link go bye bye Selling a Nismo twin plate clutch pull type suit late R32 GTR and all R33 GTR. Its has a red anodised cover. Took it to a clutch place and they said the plates look fine. pics coming soon.. pm or email silver_vspec2@yahoo.com.au for details cheers

item now on ebay for start price of $200 http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...item=2478645692 bump

bump

Hi I need a stock S13/180sx exhaust. Email or pm me. email silver_vspec2@yahoo.com.au cheers

bump