Jump to content
SAU Community

ajscef

Members
  • Posts

    6
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by ajscef

  1. Hi there, so i have a a31 cefiro and my instrument cluster doesnt light up and the fuel light is on and the needle is stuck below e even though its got plenty of gas in it and when i turn the ignition on the temp goes to half but when i turn the car on it goes to cold and the revs dont work. I was just wondering if anyone has had this problem and if there are a few different cluster options. Thanks
  2. Hi there, im in wellington nz. So I sorted out my loom, used the 20 loon just intergrated the 25 plugs etc into the loom. Hooked it all up but theres no power or lights when I turn the key, Can anyone help?
  3. Hi there, So I have a a31 cefiro with a s1 rb25det in it. I bought the cefiro as a rolling body so it had no engine loom etc. So I put the motor in and it came with a loom and its wrong, so I have to get a new loom. What my question is, how do I wire the rb25 loom into the cefiro to use all the lights, wipers and to the dash plugs. and my other question is what loom do I use for the starter motor/ alternator/ knock sensor loom as I don't have one. Hope this makes sense. Thanks
  4. Okay so I have a rb20de a31 cefiro and Its shaking while idle and when your stationary around roughly 2000-3000 rpm and Im thinking its the coils but im not to sure as ive pulled the plugs out while running and did that test. I replaced the plugs with the correct plugs and have replaced the fuel filter and was going to put my mates coils in to see if that will fix the problem but havent yet. Was seeing what you guys thought, Cheers. Aaron
  5. Hi there, i recently bought a a31 Cefiro. RB20de auto. Stock standard, was owned by an old lady hah. So Im going to convert it to manual and then eventually put a turbo on it. So i know that pretty much any rb box would fit on it, but with the drive shaft. would it be better to buy a complete manual one or can i just change the front piece of it? And because of it having a foot hand brake, whats the best way to convert it to a normal handbrake? and what one should i use? Cheers , Aaron
×
×
  • Create New...