Jump to content
SAU Community

Samgrainger32

Members
 View Profile  See their activity

  • Posts

    303

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Samgrainger32

  1. Samgrainger32
    WTB: Z32 5speed manuel gearbox must be good condition needed asap located Launceston tasmania
  2. Samgrainger32
    s13 rack mate
  3. Samgrainger32
    Wtb r32 gtst/gtr speedo cable good working order Text 0417733115
  4. Samgrainger32
    to the guys using redline shockproof are you also adding a tube of g70 or just use the shockproof?
  5. Samgrainger32
    if its gonna be low mounted then just use a 32 dump and i would just try a r32 4door cat back should fit may need to modify the exhaust hanger at the back
  6. Samgrainger32
    speedo cable?
  7. Samgrainger32
    yessss seen that on yahoo cool
  8. Samgrainger32
    you'll never cut and polish the marks out by hand best way buy/borrow a cheap buffer there like $50 and always come in hand at some point.. buy a g-mop buffing pad buy them from most paint supply shops and a bottle of 3m cutting compound http://solutions.3m.com.au/wps/portal/3M/en_AU/AU_AAD/Home/Solutions/Paint_Finish/?PC_Z7_RJH9U5230OMD40IA5R207A3AK7000000_assetId=1361689732449 use 1200 wet to knock the top off any bad bits in the paint then use 2000 by hand wet just to take the harsh scratches from the 1200 out then hit it with the buff and pad makes the job super quick i use this every day of the week never fails good luck
  9. Samgrainger32
    Hey guy what's the entry price? And is cams license required or any other member/club needed?
  10. Samgrainger32
    power cruise is on in tassy this weekend! just doing final things to the car got 5 sets of tyres ready to pop gonna give this hole drifting thing a go haha and I'm gonna be all up in that burnout pad fingers crossed i don't hit a wall or something stupid photos and videos will be up!
  11. Samgrainger32
    cars been going awesome locked diff is in power cruise is entered and can't wait 25th 26th of jan will be the best weekend for this car had a play with my new gopro and suction caps suck keeps going loose and falls down and if got as hero 3 black and after i got home to watch some of the footage it was shit sound was terrible and video was not the best after doing bit more reading i trend the hd down to 720p see how that works anyone else used one and know what settings are best for outside of a car?
  12. Samgrainger32
    na you'll be sweet! just remember if your gonna go low cut and bash the lip in the front so you don't cut your tyre!!
  13. Samgrainger32
    only seems to rub when theres someone in the back so i try to avoid taking more then 2 people
  14. Samgrainger32
    its not to bad being that there about 3mm gap between guard and tyre in the back I'm running 2 degrees in the back and 3 in the front the back has been lipped only and the front has been lipped and the top rail that always cuts the centre of the tyre in the front I've rolled over flat so it won't cut and also acts as a cover for the wiring loom
  15. Samgrainger32
    front 17x9 +18 rear 18x9.5+18
  16. Samgrainger32
    thanks man!!!! got them from j land they pop up now and again on yahoo ill keep a look out for you
  17. Samgrainger32
    well spent the weekend driving the laurel around regoed and tuned for the first time and had the best time went out with a few friends for a drive friday night car went great beside speedo randomly stopping later find out the cable snapped just after the sender that sucked done few foot on coz straya!!! bit sad on the diff cutting one some times but a locked diff will be going in asap ready for power cruise also had to put a 10mm exstended clutch slave pin in as the clutch wasn't engagging all the way solved that so from now and power cruise actually have to learn to skid the car this will be fun
  18. Samgrainger32
    cars rego and on the road as of tonight!!!!! was a long 8 months!
  19. Samgrainger32
    Oh no no I wasn't thinking of welding it up and if I did block it up I wouldn't even think about going any where near boost like just have it like that to drive to the inspection and drive home but I have a guy that is good with fab so I'll speak to him about plumbing it back in to the exhaust and make it so I can switch between plumb back and. Straight out
  20. Samgrainger32
  21. Samgrainger32
    question to someone that might know screamer pipe if you block the pipe up would that pass??
  22. Samgrainger32
    Sorry what I ment was window tint that is still legal and it is well over 100mm from the lowest point of the car (as apparently that's the rule?) and if I do lift it up change the wheels pull all the adjustable arms out source stock ones and do 100other things there still no doubt going to fail me on the screamer that are things that are a lot harder to change when I'm sure there's someone out there that would sign the car off as it is..
  23. Samgrainger32
    ok so i hate to do this but I'm starting to get desperate.. i have a car that needs pit passing as it come from the nsw I've taken it to a few different places and they have all said the same to low window tint to dark i need some one that is easy going on rego inspection the car is in very good condition inside and out has few things that i worry about has adjustable arms from and rear screamer pipe its low but not over the top would be 100mm from lowest point car looks very sleeper from out side I'm willing to travel to get inspections so please help a mate out I'm sure someone out there knows of some one that would do them pm me
  24. Samgrainger32
    ok so i hate to do this but I'm starting to get desperate.. i have a car that needs pit passing as it come from the nsw I've taken it to a few different places and they have all said the same to low window tint to dark i need some one that is easy going on rego inspection the car is in very good condition inside and out has few things that i worry about has adjustable arms from and rear screamer pipe its low but not over the top would be 100mm from lowest point car looks very sleeper from out side I'm willing to travel to get inspections so please help a mate out I'm sure someone out there knows of some one that would do them pm me
  25. Samgrainger32
    ok so i hate to do this but I'm starting to get desperate.. i have a car that needs pit passing as it come from the nsw I've taken it to a few different places and they have all said the same to low window tint to dark i need some one that is easy going on rego inspection the car is in very good condition inside and out has few things that i worry about has adjustable arms from and rear screamer pipe its low but not over the top would be 100mm from lowest point car looks very sleeper from out side I'm willing to travel to get inspections so please help a mate out I'm sure someone out there knows of some one that would do them pm me
×
×
  • Create New...