GTROID

http://www.lewisengines.com.au/rb-tech/

Ok thanks could that be likely to cause valve issues long term? Yeh cleaned all that out, will probably pull motor out, after talking to a few people it sounds like its at that age for a rebuild anyway, thanks all.

Had a boost leak and when trying to find that i had checked the turbo which had massive amount of shaft play, so it was replaced, running 14 psi and have not done head stud conversion. Motor has bout 150 on it. It has a bit of a smell but isn't a coolant smell i don't think? will check that, coolant is clean and oil is normal looking, no milkyness. No coolant loss, lots of oil in all the cooler piping etc which i expected to see. According to receipts in the glove box from previous owner 'Sensor drive gear in camshaft worn causing erratic timing control. Removed cam sensor, clean area where gear and spline connect. Under customer instruction fixed sensor drive to camshaft with devcon.' I don't fully understand as i havn't seen the setup for that but that seems dodgey as f... to me? Wouldn't you just replace the CAS?

Ok thanks for replys, appreciate it. Will check what you said rb but looks like all those numbers are fairly low to other results im seeing online.

No bubbles, sorry forgot to mention that i had checked that.

Few weeks after installing new turbo i had lots of white smoke when lifting off after heavy acceleration, had parked car up for a few weeks before looking at the problem, smoke was more evident this time around, really bad after a good hit on boost, when pulling up at home it was puffing smoke out exhaust on idle, so i've done a compression test. Did test cold as im not that keen on driving the car to warm it up, for wet test i added 3ml of oil. All with open throttle. cyl 1 cyl2 cyl3 cyl4 cyl5 cyl6 dry 136 dry 125 dry 125 dry 125 dry 130 dry 40 wet 144 wet 134 wet 137 wet 133 wet 143 wet 48 Does this indicate valve seal? Is there any further tests i should do? If it is the valve seal is it fine to fix the issue and refit the head or should i pull the motor out and have it inspected? Appreciate some feedback, thanks guys

Hi need drivers side window switch panel. This http://justjap.com/store/product.php?productid=18204&cat=530&page=1 If you have for sale and can post please inbox me. Thanks

hey do you have drivers side plastic door insert where the window switches are? inbox if you have it thanks

Have you checked inside doors? if your window seals leak they could be wet inside.

Got 1 thanks.

Hi im chasing a HICAS locking bar for postage to 4680 in QLD thanks. Best to PM me here.

still looking

nothing?

HI need tommy kaira s2 front bar for r33 gtst. Prefer unpainted, black will do too. Can pickup from Brisbane before easter or will pay post. Leave offers thanks.

All good, found some options