Jump to content
SAU Community

R32GOJIRA

Members
 View Profile  See their activity

  • Posts

    980

  • Joined

  • Last visited

  • Days Won

    3

  • Feedback

    100%

 Content Type 

Everything posted by R32GOJIRA

  1. R32GOJIRA
    Hey Longz, Yeah put me down for a pair of Bride Low Max Maxis III - Kevlar, Red graduation fabric and all logos thanks mate.
  2. R32GOJIRA
    Ill have to check it for you mate. Havent had a look at it for a while. Its just been sitting in the garage for a fair bit. Ill check tomorrow and let you know. Mate if you give me $200, you can take it.
  3. R32GOJIRA
    No probs bud!
  4. R32GOJIRA
    Looks the goods mate. Just make sure that the amp gets enough ventillation behind there, because if i remember correctly (and im talking a while back) those boss amps like to run pretty warm, especially if you are drawing some current through them.
  5. R32GOJIRA
    Nice rims mate!!! If they would clear my new brake setup, i would have jumped at them for sure!! GLWS.
  6. R32GOJIRA
    Ive got one you can have for $50. Located in wollongong.
  7. R32GOJIRA
    For what engine? I have some for an R32 GTR RB26. Splitfires only used for approx 500kms $450 located wollongong.
  8. R32GOJIRA
    I have a bare RB30 block (not sure what series) with crank and cradle that came out of a VL wagon. Not sure of kms. Will let it go for $300. Located in Wollongong NSW.
  9. R32GOJIRA
    Im sure he is not the first to do it. He is modifying an R32 GTR...... Who in the last 25 years hasnt? lol. If you haven't, then you're not doing it right.
  10. R32GOJIRA
    Looking the goods Jimmy. Side pipes for the win!!!!
  11. R32GOJIRA
    Anthony at Dahtone Racing had some made for his 32 GTR, They look mint. When I asked him about them, he laughed and said they were that much of a pain in the ass to make, he wouldnt want to make any more. But you never know, for the right price.
  12. R32GOJIRA
    No worries champ.
  13. R32GOJIRA
    I have a standard (albeit pink, could use a repaint) plenum, throttle bodies and balance tube. Would be after $800 for the lot plus postage. Located in Wollongong NSW. I also have a standard RB26 head, but it has a slight indentation on the mounting face on no.6 cyclinder. Dont know if it can be filled in and then machined flat, as i havent had the time to enquire about it. It is complete, just dont have the covers for it. But it will need a service anyway as it has been sitting in storage for a long time.
  14. R32GOJIRA
    PM sent.
  15. R32GOJIRA
    Thanks heaps Dave. Cant wait to fit them up. Appreciate the effort you have gone to. Cheers Damo.
  16. R32GOJIRA
    Can they do the Bride Maxis III in the low max with kevlar and red bride cloth with the logos?? If so, how much for the pair with rails for an R32 GTR delivered to NSW 2502? Or I could pick them up. How long after the group buy closes would delivery be?
  17. R32GOJIRA
    Id say $50 bucks would cover it no worries.
  18. R32GOJIRA
    bump.
  19. R32GOJIRA
    bump it up.
  20. R32GOJIRA
    and bump.
  21. R32GOJIRA
    to the top
  22. R32GOJIRA
    up we go.
  23. R32GOJIRA
    I have a used set of splitfires, were only one the car for about 500kms. $400 plus delivery. Located wollongong nsw.
  24. R32GOJIRA
    Jess-arse cry-st!!! Look superb mate!! Can i ask where you got your full length carbon air deflector? Also if you didnt use the intercooler shroud, do you know if it fits well? Cause if you dont wana use it, id be interested for sure.
  25. R32GOJIRA
    I get where you are coming from. Its kinda hard to picture it but the center drop on these to the mounting face is enormous!! On just the center piece alone there is a total hieght of around 103mm which is around 4". Then the lip mounting face receeds back by about 1". Then you have 3" worth of outer lip on the rear, so that is very close to 6" from mounting face to outer lip. And being the rears are 12" wide, that leaves very close to 6" from the mounting face to the inner lip. Same with the fronts, except they are 10" wide, and the inner and outer halves are 1" smaller in width (2" total) which gives you the same senario. Here are the measurements i took from the mounting face to the very outer edges of both halves of both front and rear rims. Front: from mounting face to inner lip 136mm from mounting face to outer lip 141mm = -2.5mm offset Rear: from mounting face to inner lip 165mm from mounting face to outer lip 162mm = +1.5mm offset There is around 64mm of caliper clearance from the mounting face to the rear face of the spokes at the far most point, to clear the massive calipers they use. These really are an amazing rim. I dont really want to let them go, but like i said, I could use the extra cash right now.
×
×
  • Create New...