Old Booster

Take back to the tuner and get a touch up.

what ev14s for my 32 440cc or 550 200kw at the wheels 98ron, are they all high impedance?

btw.. what size pipe is the stock R35 afm inserted into?

This weeks bills... rego shocks, tie-rod ends, caster arm bushes, and tyres, would love to go some 17 enkeis but wallet is buckling under the strain of a 25 year old car. got some quotes for PS3 and best I was offered was $213 a corner, so will probably go with the RE003s @ $115 a corner, they cant be that bad?

Unfortunately the Nitto Invo are not available in my size, 205.55.16 any other suggestions?

Thanks for feedback, I've only book in so can still change my mind, will get some quotes for the Nitto Invos and PS3s This is my daily and will never see a race track, so my priorities are wet grip and noise.

Thanks guys, might give the Bridgestone 003s a try, our very own Nismoid has reviewed them here and recons they give the Michelin PS3s a good run for their money and they're a bit cheaper too.

Anyone have any experience with Bridgestone Potenza Adrenalin RE003 ???? Just got quoted $460 inc FB 205.55.16s

No longer available.

My issues have been sorted, thanks Adam, appreciate your effort, Vehicle Interior Protection Co sent out the correct item and the courier picked up the R33 mat, so it didn't cost me any extra and I also received a present from them for the stuff-up

Have a brand new R33 dashmat available Brisbane southside $80 pickup only Was purchased through the SAU group buy from Vehicle Interior Protection, the dicks sent the me an R33 when I ordered an R32 I'll give you guys a crack at it for a couple of days before I send it back.

Already shot them off an email and their reply was for me to pay postage back to them and they will send out a new one with a gift to cover my inconvenience. Not really in the mood to muck around, If anybody in Brisbane southside wants it, they can have it for $80

Invoice says R32 so not Adz fault.

!!!!!!!

Mine just arrived, asked for a R32 and they sent an R33

1x R32 please

What size is it ?

I've used the freeze spray on turbo bolts and nut when I changed to a 3" bell-mouth dump, worked a treat.Will use it on the manifold studs when I replace the gasket and have the manifold machined, was thinking to heat the head around the exhaust ports ever so slightly before I squirt the freeze spray. Will be using one of these to extract the stud.... https://www.tradetools.com/products/818A

Sorry to bump this dead thread but have been searching all arvo without much luck, does anyone know the Nissan part number for exhaust stud nut? RB20/25 My dopey local Nissan parts man couldn't even tell me the stud P/N. Have already found that and the yokes and washers but the damn nut continues to elude me.

PM sent.

Do you have a fuel injector flow bench and cleaning machines? if so how much for test and clean?

will you take $50?

I wanted to try some high end oil and the racing 10 is group IV and V blend, plus I hear the high zinc formulas are very kind to super and turbo charged engines. What I do have to report is that I did manage to get some ue-cleaner down into the AAC and IAC valves, the two hoses which join them converge at a T-piece and then continue on to a connector before the throttle body. I didn't get as much smoke as you did out the tailpipe, just a small plume and it was gone in 30 seconds. The first drive was a little disappointing as the motor seemed to be very sluggish? I originally thought that the engine detox must have cleaned the rings too well and my compression might be down. So went for another run and kept a close eye out for smoke out the exhaust, especially when coming on boost, but nada??? Got home and had a thought, maybe all that spluttering when putting in the ue-cleaner had tripped the computer into the knock map, so disconnected the battery and went inside for a coffee. After the reset I went for another run, bingo pulls hard and clean So it's been a couple of days since then, and I can honestly say the engine has never run smoother! Definitely going to buy more of that cleaner. Mike.

Location?

Going to give her the full treatment, upper engine cleaner then drop the old oil, and refill with some cheap gulf western and Luqui molly Engine Detox. Then in with some Penrite and a new filter...