evl38u

it is official i won't get this 30seconds of my life back... it is totally wasted. i should just go shoot myself.

the problem with Rays and other alloy nuts is they fatigue hot cold hot cold, the thread becomes brittle, and yeah they either break off or come un done, now i was atthe circuit mine were loose but .........what was worse was someone else's wheel went past me when i was doing 180+ hate to know the speed of a wheel if i am doing 180 personally looking at some titanium units, 15grams each

now the biggest Q i have is becuase i don't know the honest truth, is the power output the same as a JDM becuase alot of talk but no facts.

good post, hope some of the companies and some of the vendors on here watch and learn from this .....as I won't mention names but there are a couple vendors running around saying one thing and delivering another.

I actually spoke to a company today about dry carbon doors for the 35 and Hood, located in sydney went and quick look they say all their products are all 100% dry carbon they weighed something stupid like 5kg a door got some photos having trouble loading them up but yeah very very impressed on the quality finsih, personally a CF whore myself but i hate really cheap/poorly designed carbon it looks like poo

Thankyou for your Pm's guys there is a certain workshop that is getting more direct hit, and I shall pop down and have a chat to Trent and his team, thanks for the help.

the ones i saw were all standard an basicly had sh%T kicked out of them, look like work horses.

I am sure it has been covered two things trying to find someone in the Bris area for a exhaust for the R35 Prefer titanium including Y pipe 2nd Someone to install it etc to avoid C.E.L light. Help would be appreciated.

a quality mould takes the longest, however your ight it is a one off and no one else will have this item.

depending on the grade of carbon used, how much requied remember this unit is designed not for any aero or strength it is a visual only it is a carbon over glass setup guessing around $300 in materials and approx 12hrs of work thats from start to finish working from ebay and personal knowledge resisn kit in 500ml is approx $45 timber in chipboard $50-100 carbon sheet $100-150 depedning on cut size and grade consumables $50-$75 time p/h $50 x12hr $600 guessing- No labour min $250 with labour min $800 but nice DIY at home if you haev the time.

http://www.advanwheels.com.au/racing/car.aspx?id=15 APC have this one for the Evo 8 it is a carbon setup sure they have one for the R32

how long did it take to do and how much was all the materials?

welldone, will be doing the same shortly. trying to find the information on the 2011 model. but can't find much. welldone on the purchase. drive safe

been follwing this thread for sometime and it goes to show those who just throw a wing on to look good and there are the ones who actually purchase the unit that is designed to do the job, good to see companies like aeromotions, Varis, Voltex actually spend the money in aero tunnels to ensure your getting the right product. I asume aeromotions are a fully wind tunnel tested unit?

sorry if this is a repost but trying to generate as much support as we can i think a lot of people here would get a great deal of use out of a new motorsports facility close to Sydney many other forums are taking the time to put together a submission, I no longer have a skyline but we are putting a submission together over at EvoOz and would be great if you guys and gals here could get behind this too and take the time to put in a submission http://www.wyongsc.nsw.gov.au/about/council_notices.html#2 http://www.wyongsc.nsw.gov.au/about/Motor_...uestionaire.pdf

I had a look for it too you can buy from here http://justjdm.com.au/jdmevo/index.php?cPa...ee01c527b0574c6 or here CF fabric http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...E:X:AAQ:AU:1123

Hi guys ok basicly i have a couple left for the R32 series very easy to install and cover that huge gap on the R32 between the radiator support and the front bar 135 delivered and where in AUS also have a titanium front pipe for a GTR R32/r33 APEXI N1 GT INTERCOOLER (big) for 32 33 anyhow 0419 436 427 you know the drill

nar fair question i won't hold you on that 1, basicly the air gets trapped between the plate and radiator therefore forcing it into the bay and into the radiator dropping engine bay temps by heaps and helping the radiator with a constant air against it i have had 1 on everycar and i swear they make a difference PLUS when i was at the track i saw guys making the out of coke boxes using race tape as the adhesive. anyway for the cost pretty reasonable and also tidy up the bay took me 10min to put on guys feel free to ring if unsure 0419 436 427

Hi guys after alot of messages of what the panels look like on the car here is a link with a be4 and after shot i installed this ..this morning it took me less than 10minutes http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...item=4526719293 hope this helps out sorry about the repost thanx Ryan

3 -to 3

ok RB26 32-33 models just front pipe also still got the panel is any1 requires 1

Hi 3inch titanium front pipe weighs less than a kilo this is truly a beautiful piece of craftmans ship asking $700neg Ryan 0419 436 427

any1?

to be honest i don't know how to post a pic so thats y i have given a ebay link ...sorry Mr moderator

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...me=STRK:MESE:IT is where it is on ebay