mdillonmining

Hi just wondering if soneone could tell me the rear lca length from the ball joint to centre of front and back bushs for either an r33 s14 or s15 bad alignment need to reset lca beror setting bumb steer otherwise is anyone has hub to hub mesurementz for a r33 gtst

Thanks Rusty, I've already got that the mil light changes from a orange with black stripe I'm thinking it may turn into orange but that's going on S13 wiring n it could be any colour really I'll grab a test light on the weekend and post a pinout ... Also anyone know if the Speedo needs a AC wave like the S13 or if a square wave is fine

Hi, I've been searching with no luck around the web, I'm trying to find out pinouts on the f3 plug for an engine conversion if anyone can have a look or trace the ecu plug to the f3 plug just need vss speed/ revs/mil / dash temp and ignition might aswell put fuel pump for future reference for others just doing a engine conversion sold the main engine loom with the engine I am pretty sure yellow/green is speed and yellow/red is rpm not sure on mil light or temp any help would be wonderful thanks

R33 gearbox shifter height above or below floorpan Jist wondering if anyone can tell me the gearbox shifter height above or below floorpan for a r33 using a modified gtr gearbox and custom making Cross member just trying to work out the height

Just a heads up for anyone Looking at doing the kingpins that Kudos have them for $85 / side http://www.kudosmotorsports.com/catalog/kingpin-bearing-side-nissan-skyline-gts25-gts25-gts25-20gt-25gt-25gt-p-1872.html

wish to buy a set of rb26 rods

Sorry forgot to add the specs Duration Intake: 260 Lift Intake: 9.15mm Part #: 143018 Price drop $300 camshaft $150 solid lifters

Sorry forgot to add the specs Duration Intake: 260 Lift Intake: 9.15mm Part #: 143018

Brand new unopened Tomei type b intake camshaft poncam $330 Rb26dett solid lifters with shims $200 Pickup gold coast or can post auswide $20

Hi I'm chasing a second hand stock piston for a rb25det series 1 r33 Piston rb25det r33s1 Markings top to bottom are 2 xd8 21u 05 I'm based on the gold coast either local or if you can post... Appreciated..

pm sent would you take $100 for rb26 IAC valve with the air chamber ( part # 23781-05U11- and 14066-05U10-)

Would you take 320 for the intake can pickup today or anytime during the week

Would you take $70 for the tyres would need to freight them up to gold coast can organise that if you can tape or secure them together so there right for freight let me know regards matt 0431160814 can bank transfer or paypal and ehen suits for curiour to pickup?

Would you take $1000 for it can pickup next friday or on the weekend

For use as a blanking plate for a Craig Davies pump so going to cut the impeller out n weld it need one to fit an rb25 think there all the same on the gold coast either pickup or outpost bag it pm me thanx