MidnightGTR

Lcr135: if your serious about buying contact me and ill name em. I bought the car stock and have done everything myself, I know how much its cost... Ive already purchased my next car. And no its not a vpsec

Damn sorry forgot to put a price, just copied my carsales ad $34,500

Recent service performed with all new oils/filters etc and new plugs, new battery fitted last month. Non smokers car, car has always been garaged and never been in -any- accidents, no panels ever resprayed. I have spent over $20,000 in the last year modifying this car, it is perfectly streetable only 3x as potent when you open up the throttle, street driving the car drives no different to a standard gtr. Just spent $1500 putting on standard turbos on the car and getting it all retuned. Bolt on a pair of ball bearing turbos and you will have close to 300kw at all 4 without a hassle, everything else you need is already on the car. Car just made 256kw at all 4 on 14psi (dyno sheet to prove) approx 280rwkw as is now. Keep in mind a standard gtr has around 170kw. Some of the current mods include: 100mm intercooler 3 exhaust system from turbos back Single plate brass button clutch Apexi PFC fully tuned K&N pod filters Boost controller HKS adjustable cam gears 700CC injectors + 700hp Intank fuel pump + plenty other bits and pieces. Any professional inspections welcome. As always serious buyers only thanks. Selling as im downgrading to spend some money on the house. Price negotiable within reason. Email bjrose at optusnet dot net.au or Phone 0413 382 678 between 4-8pm weekdays, normal times weekends, dont bother sms'ing me. View the car sales ad here: http://carsales.com.au/pls/carsales/!c...rch_distance=25

Ive packed em all away again now. As I said one turbo is fine, on the screwed turbo the exhaust side seems fine (apart from the play) If you were going to rebuild them you would get them done properly anyway, not do half the job.

$600 ono.

Ask precision turbos in sydney who rebuilt them. Says make an offer, gtr flanges are t28? i think Im not selling them seperatly so suit a gtr owner willing to buy cheap to rebuild.

2 Nismo RS580 turbos. Same turbo as a 2530/N1 from what im told. 1 Turbo is fine but I would rebuild it just to be on the safe side, choice is upto you though. Screwed turbo has the obvious damage shown on the photos, and about an inch of shaft play. Never the less it drove on my car for about 3 months and never died Location: Brisbane, can post at buyers expense Item Condition: 1 good, 1 f**ked. Reason for Selling: Didnt run the best on my car anymore Price and Payment Conditions: Looking for offers at this stage, no idea what they are worth but offer me something decent and ill sell. DONT ask me how much for a rebuild, do your own local research. Extra Info: DONT ask precision to rebuild these turbos trust me. Also I bought these from a so called "respected" seller on here that sells alot of shit, if you want to know who just ask ill gladly tell you (the guy is pretty "Doughy" though ill give him that much). Contact Details: Brett on 0413 382 678, or pm me here. The set. The inlet of the good one: there is minimal shaft play but I would imagine its normal for a used turbo. Munch Munch, the f**ked one:

Anyone want a bargain GTR? heres the carsales ad. http://carsales.com.au/pls/carsales/!c...rch_distance=25 Had $37k on it a week ago until the turbos started playing up so now ive decided to give it away. Car still runs and makes power just the turbos screech around 3000rpm only, engine and everything else is still perfect and im still driving it daily. Car made 315hp at all 4 wheels last dyno at just 14psi and a blocked cat convertor (now fixed). Engine had perfect compression and it still fine, nothing is wrong bar the turbos, any inspection is welcome. If no-one takes it soon I'll get them rebuilt myself and put the price back up but im looking for a quick sale this month only, ive spent over $20,000 in parts and tuning/labour. Im in Hillcrest which is southside of brisbane. 20mins from city or goldcoast.

not for another skyline. Maybe a s15 spec R. price is now $38k neg. Please see the car sales ad for full details. http://carsales.com.au/pls/carsales/!c...r...rch_distance=25 Ive had my mechanic pull the turbos off and inspect them and he said he couldnt see anything wrong, put it all back together and now everything seems fine, but it couldnt have been the turbo problem he first thought as he said they would sieze up within a week but went for months, at times the noise wasnt even there. so the turbos are all good, any professional inspection is welcome. If any -serious- buyers want I can take them for a drive to confirm it.

$39,000. car has to go, the ad is also on car sales for any interested peoples.

Price drop! and plates available now.

Sorry forgot to add you can email me at [email protected], prefer email over pm as email gets checked alot more often. Rego is till November

1995 R33 Nissan Skyline GT-R for sale. Just under 100,000kms on the clock, immaculate condition throughout a well looked after car. Factory features: - Rare Midnight Purple colour - Big Brembo brakes + ABS. - 4 Wheel Drive and 4 Wheel Steer - Power steering, electric windows - Climate Control - Original 17" forged alloy wheels Aftermarket features: - 2x 320 HP Nismo ball bearing RS580 turbos. (need rebuild, details further) - 2x HKS adjustable cam gears - 2x K&N air cleaners - 2x 80mm air flow meters. - 3” Dump pipes, 2 ½” down pipes, 3” cat back system. - Apexi PowerFC full engine management unit (dyno tuned) - Huge 600x300x100 polished intercooler - Big single plate brass button clutch - GReddy Type-S blow-off valve - 6x 700 CC SARD injectors - 700 HP bosch intank fuel pump - Boost controller - GReddy oil catch can - Clear NISMO indicators Interior features: - NISMO 320k/hr tacho and center guages. - Apexi EL Boost guage mounted on GReddy A-Pillar - GReddy shift knob - GReddy turbo timer - Factory Nissan GTR floor matts front and rear - Retrimmed quality leather around gearstick and handbrake. - Audio system consists of MP3 headunit and Alpine 6 ½” splits in front Over $20,000 in parts, labour and tuning. Other notes: - Regulary serviced every 5000kms with MOTUL oils and genuine filters. - Major service done which includes new GReddy timing belt, oil and water pump, all accessory belts and fluids. - New oil in all drivetrain including gearbox and diffs. - Engine has good compression in all cylinders. Turbo details: One turbo has a recent noisy bearing, I bought the turbos from a fresh rebuild from a workshop in Sydney (Precision), unfortunatly the workshop has since been found to do a lot of “less then standard” rebuilds Got one quote for $300/$400 per turbo to replace bearings so I will take off a FURTHER $1000 from the -agreed- sale price to cover the cost of a rebuild or a new turbo setup. Was going to rebuild them myself but figured I would leave it up to the new owner, you could change to slightly bigger turbos again, maybe even a big single conversion, everything else you need to run the turbo setup at a high level is already on the car, and you'll have another $1000 for whatever you decide. Power details: Last dyno tune car made a lazy 234kw (315hp) at all 4 wheels (approx 280rwkw) on 1 bar boost (14psi) Would now be around 260kw at all 4 wheels (over 300rwkw) still with a conservative tune and boost level of 1.2bar (18psi) A stock GTR will make around 180kw at all 4. This car has all the parts now to push it further if the new owner desired. Any questions serious buyers please phone Brett on 0413 382 678 Mon-fri (4pm till 9pm) Weekends anytime. No time wasters please, NO TEST DRIVES. Full set of pics can be found at: http://members.optusnet.com.au/bjrose/sale/ Now $45,000 ono. Also available! my prestige plates "SAY BYE". Black on gold, slimline front, -never- fitted to any car. Was going to keep these but if anyone wants them i'll sell them at very cheap price for plates like this, $2500.

Id bet money he knew as well as I do now that these turbos were going to be useless in under 2000kms. From the way he talked about this miracle turbo shop Precision hes used them before, no doubt heard of their problems, I dont really care how much you love Chris. WillamsF1, im in Brisbane but if you need another case against this dodgy workshop ill help however I can.

Just rang John from precision turbos, and what do ya know, within the first minute he starts rambling on about the oil pressure and its the cars fault.. I never saw that one coming. Even had my mechanic ring him and my mechanic basically said the guy is a wanker and denys anything he said to him (apparently my mechanic doesnt know what hes talking about hah) Anyway a word of warning for others, never buy any product from Precision turbos, or on that note, i would never buy off doughboy either, hes obviously sold a few of these and knows exactly whats going on.