IT15ON

As per title trying to find a lewis sump which has the conversion style pickup, to suit AWD RB being converted to RWD I am contactable here or 0437 771 534. Located Newcastle can pay for post, open to new or used.

pm sent

Me and a mate will join from Newcastle, aiming to be at the halfway point at 1130

Awesome project. I recently put a gtr rear diff in my S13 and wondered how the front one might fit too, what sort of times has it run?

$200 or offers?

Hi guys, Keen to share my results, hopefully they might help others in choosing their setup. S1 RB25det, 2013 ATR43SS1PU turbo, stock manifolds, 3" exhaust 100cell cat, megasquirt ECU, splitfires, sard 850cc injectors, DW300 pump, undersized intercooler (high intake temps and around 4psi drop). Graph shows 98 on gate pressure vs ethanol with a little more boost.

price drop $240

Hi guys, Had these a few years but would have only done 5,000km in perfect working order $280ono Newcastle NSW

Are all the z32s r230? Or could be an NA z32 r200 size? My r200 crown wheel fits on it fine which is what made me think it's not an r230/z32?

Thanks for looking that up. I will have to see if there is a part number on it anywhere, currently it's at a shop. The guy I bought it off said removed from 32 gtr, and it came with stub axles/half shafts which are 6x1, which makes it seem to be correct?

Hello guys, I have had an ongoing saga trying to fit a GTR centre into my R200 housing in S13. I have purchased a used Nismo Gt Pro, to suit 32 gtr, and went to fit to my R200 housing. I went with GTR centre due to swapping to 32 GTR 6x1 CV shafts etc on the Silvia. It didn't fit in the housing, so I bought a 32 GTR complete diff (non active diff) and tried that. The Nismo centre still doesn't fit in either my S13 housing, OR the 32 GTR housing. A comparison photo shows that the Nismo is approx 15mm wider than the stock mechanical GTR centre. I am wondering if anyone can identify what is going on? Could the Nismo be from something else? Could it be to replace a 32 GTR active centre rather than mechanical and is that centre usually wider? Any help would be appreciated. Thanks

Great project mate. Did the m3 get the strengthened floor in rear from factory? My mate ripped the floor out where the diff/subframe mounts in his!

Hey mate not sure if this will help or not, i purchased a nismo gt pro to suit 32 gtr. Went to fit it to my viscous housing r200 (in s13) and couldn't get the center to fit in housing. I ended up buying a complete 32 gtr diff and am getting a shop to swap it all over. So next week i may be able to get it back and check the shafts etc for ya but as gtsboy said not sure if they'll match yours or not