Jump to content
SAU Community

cattivo_69

Members
  • Posts

    133
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by cattivo_69

  1. Hey guyz have an R32 and when the car warms when im driving i get hot air coming thru the vents. This happens while the CC unit is off, when i push the recycle button (the one with the arrow turing) it stops. Should hot air be coming out if the CC is not on?? Any help would be appreciated joe
  2. Need the carpet insert for the boot for an 89 r32 skyline cheers joe PM if any1 can help
  3. Hey guyz My mate gave me a 12" JL W3 sub in box and just wondering whats a good amp to support it, i dunt wanna spend 2 much coz i still gotta buy my deck?? Any ideas? Thanks guyz Joe B)
  4. Hey guyz have 2 blown headlight globes on my 32, pulled em out and they are PIAA H3C globes, (normally looks a bright white when lights are on) tried autobarn they didnt have em... Anywhere i can get em from, coz i cant drive at night atm without any globes... Thanks Joe
  5. WTB RB20DET FAN CLUTCH PM me plz
  6. Hey guyz just a quickie, is an Rb20 fan clutch (fan attached to front of engine) the same as a VL? joe
  7. hey guyz have been noticing lately i have had to top up my break fluid every 2 weeks in my 89 r32 gts4..? im thinking i must have a leak? any ideas? what should i look for? is this common in 32's? joe
  8. what am i looking for to replace wat i have now?? price??? if u kno??>?
  9. Hey guyz i have Tein Sports Spec HR adjustable shocks and coilovers on my r32 gts4 on the rear. They are completely buggered, seems like no gas coz u can push down on the shock with ur little finger without even applyin pressure, and the drive is so rough and extreme knocking noise too... can i get these reconditioned?? whats the best option? without spending big bucks whats on the car now was off a 32 gtr coz it has the bnr32 stick on the shockers... on all four.. but just the rears are stuffed now! PLEASE HELPPPPP!! joe thanks joe
  10. Hey guyz i had the high pitch sound on my rb20, sound like u were deflating a balloon. Ended up being snapped stud bolts, 3 were snapped, and the rest basically just fell apart when i took them out, this was only last week 12x stud bolts- $36 (from autobarn, same as the VL) go to a nut and bolt place and buy sum brass nuts and sum washers if ur replacing exhaust manifold gasket too, $95 from nissan, they have sum in stock also found that the four bolts holding the turbo to the manifold were also loose. One had fallen off and was sitting just underneath the manifold the others were just about to fall off. My old man bough sum easy out stud extractors, god bless those things.. makes things so much easier. IF u can borrow a right angle air compressor drill this will also help heaps too. We did it ourselves, just takes time and patience coz its hard getting ur hands in there, and becoz theres so much heat generated in that area, sum of the bolts when u remove them just crumble. So be prepared to swear allot. Hope this helps!! Cheers Joe. If u need to kno anything.. give us a holler!!
  11. the front have the tein springs as well (J080-ABC) Im happy with the front suspension its just the back
  12. Hey guyz I have a r32 gts4, and having problems with the rear suspension. The car is at the right high, and the shockers and springs that are on the car are TEIN this is what is written on the sticker on the shocker Tein Sports Spec Type HR DLN15-12531 BNR-32-R 10004 And the spring or coil-over if thats what you call it has: Tien G060-ABC Now the problem i am having is that basically the car is sitting at a good height, however the rear suspension is knocking and i feel every damn bump Now i kno the ride isnt ganna be smooth all the time, however the knocking a roughness is fairly bad. Is there any adjustments that can be made to improve or any suggestions you could offer me. I have the tool to adjust the height however i have not adjusted it before, thats how it was when i imported the car. Thanks Joe
  13. thanks guyz much appreciated!! wat about turbo gasket kit for the rb20 turbo?? easily avaliable??
  14. Hey guyz I need to get a hand of 12 exhaust manifold stud bolts for an Rb20det im in melb, anywhere u suggest and also are they the same bolt they use on the VL sum1 was saying that they are most likey the same coz the rb30 rb20 rb25 use the same stud bolts??? does any1 kno?? PM me please with ur ideas? thanks joe
  15. basically sounds like the turbo is fluttering, you kno when ur spooling up you can hear it normally just sucking in the air, well it sounds like the air is escaping but its not a hissing sounds hard to explain mate!
  16. ok might be a stupid question and i might get a stupid answer but still learning, just installed the autometer boost gauge, now i wanna kno when and how to read it properly? If any1 has time to give me a quick run down would be great? so like how to find out wat ur running, what that actually means.. blah blah! thanks guyz Joe
  17. before you replaced urs, were u getting a fluttering noise, like a leak?
  18. yeh standard exhaust manifold....
  19. Hey Guyz Got an 89 R32 rb20det, when the turbo is spooling up sounds like the turbo is fluttering (cant explain the noise) anywayz i took it past a turbo specialist and he reckons theres nuffin wrong with the turbo itself, he believes 99.9% that its a exhaust leak, he said sumthing about 12 bolts along the exhaust manifold side of the engine are probably missing or broken... What u reckon?? he said to fix it im looking at $660 to replace bolts and gaskets... PM me with ur thoughts plz? Thanks JOe!
  20. Hey Guyz Got an 89 R32 rb20det, when the turbo is spooling up sounds like the turbo is wheezing (cant explain the noise) anywayz i took it past a turbo specialist and he reckons theres nuffin wrong with the turbo itself, he believes 99.9% that its a exhaust leak, he said sumthing about 8 bolts along the side of the engine i believe next to the turbo are probably missing or broken... What u reckon?? he said to fix it im looking at $660 to replace bolts and gaskets... PM me with ur thoughts plz? Thanks JOe!
  21. Hey guyz might be a question that is asked commonly, not sure... but how hard is it to put an r32 rb26 into my r32 gts4 wats needed... rought price on an engine?? thanks joe
  22. so does that means its basically on its way out? nuffin i can do??
  23. i dunno exactly wats the go with it, but 1st and 2nd gears when i put on the gas the turbo sounds screetchy as it winds up? any clues?
  24. yeh checked oil and theres definetely oil in there i drove the car 2day and it was sitting normal so dunno wat the hells going on
×
×
  • Create New...