Let Me Drive

driver side r32 gtr window winder assembly in melbourne 0421 830 517

i agree ASH you can stop every fast rush just depends on what you want to counter with???? i play fast banshiee and go from there and then adapt from there

i play with 4 other guys most nights but now in the us server

awesome stuff love the last photo

well the fun has started!!!!!!!!!!!!!!!!!!! we cleaned the tank and got it all ready to put back together but noticed the holyee lift pump had a bit of fuel running from the back where a small hole is to tell you that the nylon sleave has shit it self. well it has only after around 4 to 5 hours of run time NOT F%^KING happy the pump costs a bit and now have to replace. so with that now on the cards i have come to the conclusion that i will now run an intank low presure pump and feed the surge tank that way. photos to come

well worked on the car on staterday and took the fuel system out due to a small leek from the tank LOL!!! only a pin hole under presuser but all rewelded and tested. decided to check the fuel filters and found only a small amount of crap so was very happy. but when expecting the holly lift pump i found it was leaking from the top seal so now im going to take it back and get it checked NFH!!!!. or well by next week should be all back together and time for start the tidy of the wireing and the 4wd system!!!

ok guys have not done any updates for a while so here we go first we finished the plumbing and sorted out the wireing. well sort of so we thought. first the car would just die after a short while on idle so we thought we have a fule pump wireing problem, was not that. next we found out the ignitors were dieing fast went through 5 befor we found out that the haltech need to run the relay that goes to the coils and not off our switch we had!!! no its all sorted and i have finaly had a start tune!!!!!!!! we made 325 rwkw on semis at 16 psi and here is the first movie of me driving the car for the first time so happy now to sort out the last little bits and put it all back together and in show condition.

awesome mate!!!!!!!!!!!!!!!!!!!!

got any pic cos im interested

amte do you have a working ignitor

this is my other project, then to this over 9 months

this is a AVO return cooler kit installed

bump

problem is paul we are not useing the standard gauge so what we are do is inputing it to the IQ3 digi dash and that want us to give it a scale to then convert to signal the dash wants??????

Guy I'm attaching a heltech 2000 pro to the standard oil presure sensor getting a reading but dont know what scale to set the heltech to???? Example what voltage is say 40 pound ?????

so that last post did not work have uploaded to you tube her they are

in the end i got a brand new rack so i thought i would use it. well today it started helllllllll yeahhhhhhhhhhhh!!!!!!!!!!!!! http://www.facebook.com/video/video.php?v=...7447&ref=mf

No it as just there way if saying that there were to many people to control so they wanted it shut down and next time to have a permit and security

was a good night thanks to everyone for being good and not making the cops upset so the next one will be huge

mate give us a call tomorro to talk i would love to help out and me and dad could race with you 0421 830 517

any one planing on doing a tour??? me and my wife are looking into doing a tour with some company to make it easy to get around and see all of the place. any one know of any place that does this tour

where did you get the rear N1 pods???? i want lol

yep people told me it would be a good thing to do!!!! does not cost much and any thing to help me is a good thing LOL!!! and when you say try the old rack what are you talking about?????

no not yet, they will come with time just had to put the money other place so far, but they will come LOL