gt35r
-
Posts
8 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by gt35r
-
Car seems to be running better now but occasionally has a bit of a rough idle and mainly when cold. Also get a bit of a pop/backfire on down shift and in between gear changes when getting into it a bit. Could this be because its an aftermarket afm?
-
The part number on it says its the same as the old one I had and the guy at jap autos says its the right one. It not a jecs or Nissan one, its just a aftermarket one but is brand new. I didn't want to fork out for a jecs when I am putting a z32 on it in a few weeks when I get my new turbo.
-
Ok so I got a hold of a new afm to suit. I plugged it in and the car was idling rough. Drove ok but idled rough for a bit, seemed to idle ok after a bit of a drive and warm. I'm yet to drive the car today but Could it be cause the ecu needs to readjust to suit.
-
Will series 2 afm work on series 1?
-
The afm I got was 70mm off gtr and not 80mm for a 25. Car didn't stall while idling and didn't cut out like normal but surged when accelerating hard so the problem could be afm but yet to justify that when I get the proper one. I'm getting a z32 soon but have read that I can't connect it untill im ready to put my pfc in and get it tuned.
-
Got a hold of another afm. Will give it a try and post up the outcome
-
Could the afm be dieing in the arse causing the engine to stall
-
My series 1 r33 skyline with series 1 rb25det is got a problem. It idled rough on a cold start untill I give it some throttle. And randomly cuts out when driving around 2500-3000 rpm. It also stalled while idling last night. I've cleaned the aac valve and air flow meter. I've changed the fuel filter, air filter, o2 sensor, coil packs and put iridium plugs in it and it is still doing it. The cutting out is random as in, one day it won't do it, next day it will and it varies from one quick cut out to 5 or 6 times in a couple of minutes. It is similar to when a car runs out of fuel. Any help would be appreciated.