Jump to content
SAU Community

MDM

Members
 View Profile  See their activity

  • Posts

    33

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by MDM

  1. MDM
  2. MDM
    Here are some photos in no particular order of what i have done since the last photo update.. Removed the standard 20det clutch after i ran the motor in and fitted a excedy 5 puk clutch. Broke the top hose fitting off the radiator ( not very impressed ). Wired in Z32 AFM. Took it to Torque Performance and had a nistune board fitted and a custom tune done. Got half way through shimming my spare diff. Did the front brakes. Went to powercruise. It rained. If ive missed something the pics will explain. Now i just want to get out and use it. \ I forgot to take a pic of the dyno sheet so will do that next time im on the computer
  3. MDM
    Now the car is all running i have to do all the little stuff ( which has turned out to be bigger stuff rather than smaller stuff ). Got all the battery stuff done. Ordered a new spring for the BOV valve so it idles.
  4. MDM
    Got everything togeather and fired it up.. no leaks so thats a bonus. Idle is a little funny but will figure that out this weekend. Will hopefully send it off for a tune in a week or so.. By jdmyo at 2012-09-12 Had to lengthen both the TPS plugs. By jdmyo at 2012-09-12 By jdmyo at 2012-09-12 By jdmyo at 2012-09-12 By jdmyo at 2012-09-12 By jdmyo at 2012-09-12 By jdmyo at 2012-09-12 By jdmyo at 2012-09-12
  5. MDM
    By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 Have been away for a few weekends so not a lot of progress. Injectors turned up from the states. Got an oil restrictor made up and thats about it. By jdmyo at 2012-08-30 By jdmyo at 2012-08-30 By jdmyo at 2012-08-30 By jdmyo at 2012-08-30 By jdmyo at 2012-08-30 By jdmyo at 2012-08-30 By jdmyo at 2012-08-30
  6. MDM
    By jdmyo at 2012-07-27 Painted the sub frame with POR15 so it will stay nice and shiney. Fitted all new hoses and braided lines before putting the motor back in today. By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05 By jdmyo at 2012-08-05
  7. MDM
    Picked up some parts to relocate the battery into the boot. I went with 35mm double insulated cable instead of 25mm because a few people told me i will get less voltage drop due to the length of the car. Only down side is i had to buy 10m of it. I was thinking maybe running the earth the length of the car as well should provide a better earth. By jdmyo at 2012-07-16 By jdmyo at 2012-07-16 By jdmyo at 2012-07-16 By jdmyo at 2012-07-16 By jdmyo at 2012-07-16 By jdmyo at 2012-07-16 Had my wheels painted satin grey, i did all the sanding which i now realise sux ***.. They came out looking pretty cool but i haven't put them on the car yet so not 100% sure if they will look as good on.... to late now.. By jdmyo at 2012-07-27 By jdmyo at 2012-07-27 By jdmyo at 2012-07-27 By jdmyo at 2012-07-27
  8. MDM
    By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15
  9. MDM
    By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15 By jdmyo at 2012-07-15
  10. MDM
    Motor is ready to come out and BOV turned up. By jdmyo at 2012-07-05 By jdmyo at 2012-07-05 By jdmyo at 2012-07-05 By jdmyo at 2012-07-05 By jdmyo at 2012-07-05 A bit more progress. I got the flywheel machined again because im pretty sure it was out of balance after the first time and it has some pretty wicked heat spots on it. Got new heater, fuel and water hoses. Got a spiggot bush from nissan for $10 aswell. Thought it would have been more genuine. Started to re-wire the injectors to suit Bosch injectors. Gave the engine bay a clean up and started preping the wheels to be re painted. By jdmyo at 2012-07-15 By jdmyo at 2012-07-15
  11. MDM
    Got a few more bits, some good some cheap ( intake mani ) Have a tial BOV on the way and have started pulling the motor out of the car.. My work place By cefiro at 2012-06-29 By cefiro at 2012-06-29 Old injectors on top 270cc, new injectors below 550cc ( series 4 rx7 . Business card from the guy i got them off.. By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29 By cefiro at 2012-06-29
  12. MDM
    By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01
  13. MDM
    By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 Long block all togeather except lower cambelt cover. I also need to make up a piece to fit between the two covers to fill in the exposed space. Should get intake mani sorted this weekend and all aux. Still need to sort injectors and ECU but that should be it. Just have to build up the motivation to pull the motor out again.. By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01 By jdmyo at 2012-06-01
  14. MDM
    By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21
  15. MDM
    Started on the head yeaterday. All well except the bolts in the exhaust cam keepers where seized in the keepers. Unknown why or how but got them out by very slowley unwinding them bot cant get bolts out and damaged one trying. Yay get to spend more money getting more. Other than that gave it a good clean, very light valve lapping with some fine paste. By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21 By jdmyo at 2012-04-21
  16. MDM
    By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09 By jdmyo at 2012-04-09
  17. MDM
    By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 Finally spent some time on the motor again. Got the bottom end all togeather.
  18. MDM
    Gave the bores a light hone/de-glaze. Dont think it came out to bad having only done it once before. Got the crank and pistons in as well. By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18 By jdmyo at 2012-03-18
  19. MDM
    By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 Got all the parts back from the engine reconditioners yeaterday. block, cradle, crank, pistons, rods, pick up all acid dipped. Crank polished & collar fitted. Piston ring groves cleaned, shot peened & gudgens checked. Tensioner stud repositioned. I will fit the oil restrictors myself. Got all parts except bigend bearings which will arrive mid next week. Will give it a light hone this weekend then start putting it back togeather.. By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14 By jdmyo at 2012-03-14
  20. MDM
    Stripped block, had a massive time getting the inner crank pully off. Consumed about an hour of my life due to rusty build up. Everything looks alright rings look new, bearings a little worn, still has hone marks on bores but i think they are factory ones.. Im going to get my engine rebuilder to relocate my tentioner bearing as i dont want to fail. I will also get him to fit crank collar. I will give the bores a light hone myself. By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04 By jdmyo at 2012-03-04
  21. MDM
    Will try and get to a few track days in the new year but for now it will just be a street car..
  22. MDM
    By jdmyo at 2012-02-26 Also started on my next motor By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012-02-26 By jdmyo at 2012
  23. MDM
    By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 A couple of things i had to do for the cert.. High flow cat and 2 hoops + changing an exhaust that had done about 200kms.. Should have done my research. By cefiro at 2012-02-25 By cefiro at 2012-02-25 By cefiro at 2012-02-25 By cefiro at 2012-02-25 By cefiro at 2012-02-25 Got some strut braces.. By jdmyo at 2012-02-26
  24. MDM
    By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 more exhaust and some pics of when i took it to Powercruise in Nov By jdmyo at 2011-12-27 By jdmyo at 2011-12-27
  25. MDM
    By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 When i got all running the turbo oil seals were leaking and it was smoking like crazy + the exhaust was rangi as. By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27 By jdmyo at 2011-12-27
×
×
  • Create New...