Search the Community
Showing results for tags '272'.
Found 3 results
-
HI Guys. Missed out on one that just sold on here and would like a head already set up so I can just bolt on and get it retuned. Would like 260 deg + and any higher lift than standard with springs all installed and clearance. Ported would be good also. Would also be interested if you have cams and springs together. Just let me know what you got. Thanks in advance, I have plenty of time as I would like to have this by July but sooner the better.
-
HI Guys. Missed out on one that just sold on here and would like a head already set up so I can just bolt on and get it retuned. Would like 260 deg + and any higher lift than standard with springs all installed and clearance. Ported would be good also. Would also be interested if you have cams and springs together. Just let me know what you got. Thanks in advance, I have plenty of time as I would like to have this by July but sooner the better. -
RB25 lifters bleeding off cannot solve! Hi guys, iv got a brain teaser for you all. Firstly, overview. I have a built 25 in my 33 running tomei pump 2x 1.3mm restrictors etc etc. Ran 4 years problem free. many track days, lots of spirited driving and so on. Then I decided 22 pound wasnt enough so i put in 85lb supertech springs with TI retainers and camtech 272 9mm lift cams. (a 'drop in cam') From there on I instantly had troubles with lifters. originally dropping one or 2 in and out and in no time i was losing all lifter pressure and it sounds exactly like first start up on a new set of lifters. This is all however at high RPM. Anything under 3k is perfectly fine. but one big rev and I lose all pressure and it takes about 5-10 mins idling around to recover. And i guarantee its the lifters. Heres what iv done so far, bumped oil pressure from 65 to 85 pound. Zero change. Replaced all lifters with genuine low km ones i have spare. Zero change. Checked cam type with camtech, all good. checked spring heights, all good. Checked lifter doesn't go past the gallery. all good. Camtech have suggested its the vct bleeding off pressure, it cant be as its got its own feed. We have no idea what is going on. All ideas welcome! Anyone got a similar story or a fix?
