Search the Community
Showing results for tags 'Electronic Boost Controller'.
Found 2 results
-
Hey guys, Recently just installed a Blitz Dual SBC Spec S into my 33, I havent had alot of experience with them but from what I gather there is max pressure, gain etc that I can set on it. The problem I have, is the car isnt complied so setting it up and tuning it on the streets is not an option. It will be a while before I get to a track day and not sure if thats the right forum to set the thing up either as I wont be going a track speed while I configure it and could end up becoming more of a hazard on the track to others. So my question is, has anybody done this on a dyno successfully using this model controller ? , what settings did you use for a stock R33 RB25DET ?
-
Genuine Gizzmo MSIB-C v3 Electronic Boost Controller (53PSI) QUICK SUMMARY Gizzmo’s MSIBC has been on the street now for approximately 10 years and has the glory of being John Bradshaw’s choice on his 7.45sec 187mph GTST Skyline. Albeit the best value controller anywhere, the MSIBC-V3 uses a genuine American MAC solenoid and a precision Motorola pressure sensor. All the critical hardware components are high precision and quality branded items. In it’s initial design we purpose built an engine setup so we could fine tune the boost control on our hub dyno up to the advertised 3.5 bar; we ran it up to 53 psi to be exact (3.65bar). At that level we were getting fluctuations of +/- 0.3 psi on the test mule, so approx 1%. This control software still resides at the heart of the MSIBC-V3 although everything around it has been improved. The processor is now 16bit instead of 8bit. Physically it is 80% smaller and 70% lighter (with bracket) than previous versions. Now, to make mounting easier, it has a mounting bracket, also we have now added a feature that allows you to quickly set up your boost, even in real time whilst on boost if you’re feeling a little crazy. So like most of todays technology, the MSIBC-V3 is easier to use, lighter, smaller, more powerful than ever before yet still costs the same. We challenge you to find a better value boost controller anywhere in the world! FEATURES ● NEW for V3 Easy set Boost feature ● NEW Reversible adjustable mounting bracket ● NEW Tiny Profile (57mm x 26mm x 30mm) ● NEW Weighs approx 40g with bracket ● Remote Scramble/Memory Change (Yellow wire to earth) ● Simple 2 wire installation ● Open and Closed loop boost control ● Closed Loop Solenoid Supervisor ● Operating Current < 0.5A ● Reverse Battery Protection ● 6 Boost Memories ● 32mhz 16bit RISC Processor ● Active Over Boost 5psi to 50psi ● White 7 segment LED display ● White backlit buttons ● Real Time digital boost gauge ● Pressure Display in PSI, BAR or KPA ● Suits Internal or External Wastegates ● Comes complete with High Performance MAC Solenoid & All Fittings ONLY $290 incl. Delivery (Express) $290 Delivered
