Search the Community
Showing results for tags 'car audio'.
Found 4 results
-
Hey I’m currently doing a car audio install in a 2018 Kia cerato YD and I need some recommendations on that to do I’ve done some installations before but none with a dual battery set up I’m planning on using a 200-250a alternator and a slimline 170AH AGM in the back I’ve heard some people say just use a isolator whilst someone from a car audio shop says to use a regulator or Dc-dc charger I’ve looked everywhere for a reg or dc-dc that is 200-250a to keep up with the power draw from the 2-3kw monoblock I’m planning on getting i already own the battery and the sub but no idea what to do after the advice that if I don’t use a dc-dc or reg my battery might get too much charge and go short circuit and act like a welder so no idea now what to do idk if I’m allowed to post links I’m new here link to the alternator: https://www.powerbastards.com/proddetail.asp?prod=14962-250-HD1-1 theres also a stinger alternator that’s a 220a but I don’t have a link it would be custom made Cheers Rick -
Hey... I'm bored at work, so I might post something up kinda useful. I was aiming for a mediocre audio setup, and didn't want to spend big coin on audio wiring. I ended up settling for Stinger 6 Channel RCAs ($55 from eBay US, delivered) and some 5 core trailer light wire ($12 delivered off eBay AU). No point spending massive coin on cabling for just Vifa speakers & Jaycar Precision speakers. So here goes... If you ask why I used duct tape? it is because it's not easy to cable tie down flat cable. Also the headunit wiring done by the previous owner was "ok-ish" so I left it as is, just chopped the speaker lines up and connected it to the trailer wire. 5 cores, 4 for speakers, 1 for remote. Works a treat! I know, it's a crappy 1x preout deck, will be changed soon after my trip -
Wanted to buy moulded sub box as per the attached image. Prefer box suitable for 12" sub, but not that fussed if another size. It's a series 1 if that makes any difference. Located Adelaide SA, willing to pay postage if a reasonable rate from interstate.
-
The amps are mounted on mdf custom cut for an R31 boot floor. Surround and covers available if you want them. Product specs here http://www.clarion.com/au/en/products/2011/audio/amplifier/XR2110/au-en-product-pf_1259530256450.html http://www.clarion.com/au/en/products/2011/audio/amplifier/XR2410/au-en-product-sc_1259530256459.html The sub is mounted in a custom mdf box sized to fit between the strut towers in the boot of an R31. Product specs here http://www.clarion.com/au/en/products/2009/audio/subwoofer/SRW1251/au-en-product-pf_1172420599742.html Good condition, located in Melbourne. $300 for the lot for pick up. Call Michael on 0419 006 252.
