Search the Community
Showing results for tags 'catback'.
-
Hi guys, I had a mate build me a cat-back exhaust for my 32,its 3.5 inch diameter stainless steel system. It has an x force muffler and resonator. It's been driven twice since it was fitted, and I've decided to go in a different direction. I'm looking for 800ono, I'm located near hornsby in Sydney -
Hi guys I need to borrow, rent or buy a stock R33 catback to pass EPA. I don't think I'm gonna pass with my current 3" catback. Can anyone help me out? Thanks!
-
Selling my Tomei Expreme Ti as im going for a custom made exhaust. Comes with everything as brand new (haven't used consumables like the anti seize thread paste it comes with) In original box. Pretty much brand new and sounded amazing, get yourself a steal. Only had it on the car for a couple days. Was going to get a custom mid section made to slip into this and decided to go full custom instead and sell this (rather than waste half of the exhaust). The thing is so amazingly light I couldn't believe it, the whole system weighs only 7kg, a reduction of over 10kg from stock. pics: Price 1100 neg Can post if needed Vid of how it sounded on the car: http://www.youtube.com/watch?v=mwEQGpIe34M Location: Noble Park VIC Phone: 0425 867 834 -
Hey, have these two catback exhausts here i dont need the first one, suits r33 2 door, stainless, muffler and resignator 3" - $150 other is either for r32 or s13, not sure. Bought it a while back of a parts importer who assured me it fit r33, it doesnt. It is definitely nissan though. Good quality, looks good, just has a cannon, could easily mod it to fit anything - cheap $100 located at Caboolture 4510 0418 537 181 -
Hey Everyone. Up for sale is my full exhaust off my 34GTR. Reason for sale is I changed my exhaust to a nismo ne-1. TRIAL TITANIUM CAT BACK - $2000 80mm (3.15'') / 115mm tip Only done 4000kms with the rear muffler on and 500kms with the mid pipe on. I purchased this through import monster at the end of last year for $2135 ( $2750 including shipping ) Asking $2000 on the basis of ive already paid shipping and its only been on the car for a very short time http://www.trial.co.jp/osaka/original/bazooka/muffler.html link to the trial website ----------------------------------------------------------------------------------------------------------------------------------------------------- CUSTOM MID PIPE - $400 76mm ( 3'' ) Only done around 3000k with this mid setion. full stainless steel and cost me $600 this mid section pipe was custom made by BEST MUFFLERS in Carlton Sydney. it has a magnaflow muffler, this mid pipe was made to substitute the titanium mid section due to it being to loud for my liking. Asking $400 as again its only been on the car a short time and goes with the titanium exhaust. -------------------------------------------------------------------------------------------------------------------------------------------------------- VENOM CAT - $150 3'' flange / 4'' body - full stainless steel Purchased for $250 Asking $150 as again only been on the car for 4000kms ---------------------------------------------------------------------------------------------------------------------------------------------------------- TRUST GREDDY FRONT PIPE.- $350 2x 70mm - 80mm biggest front pipes out there unless you get custom made ones. purchased from RHDJAPAN at the end of last year for $446 delivered. asking $350 as again only been on the car for 4000kms ************************************************************************************************************************************* Not in a rush to sell these but thought id get them up on here. with everything the car made 324kw so can flow power. I can sell these separately or all together. can ship at buyers expense. LOCATION: Central coast, NSW can meet at the end of the freeway for Sydney people PM or call/txt anytime 0409076032 Cheers Kane
-
Hey guys selling RB25 R33/34 na exhaust headers with catback exhaust No holes or leaks anywhere 2.5" pipes with highflow cat exhaust was put on by Pipewerx in Brisbane pick up in rockhampton or surrounding areas (will deliver if close enough) or can ship at buyers expense looking for around $300 ono or swaps for any parts of interest (check other topics) contact either through here or on 0458585306 -
HKS hi power silent catback exhaust, 80mm, ran over 340RWKW. Used, less than 2 years old Suit 34GTR, fit perfect with rear diffuser, no droning and a nice note. Replaced it because I went custom setup. Will need 2 gaskets and hardware. Price: $500 SOLD Note pic is of dumps when just coated, they are matt black now after use. R34GTR factory stainless steel dump pipes x2 Used in good nick, off a 99 vspec Flow better than 32-33GTR cast dumps I had them ceramicoated by Craved, includes factory head shields Price: $250 Nismo 555cc injectors Used, had them in my car for less that a year, suit All RB26. pulled them out due to going to 1000cc work fine, should get 350RWKW or so with 98 depending on pump and fuel pressure. Price: $250 SOLD Cam gears, adjustable. Possibly made by racepace, were on car when I bought it. Used, from my 34, these are factory outer gears with an adjustable center. Very durable, cost effective upgrade to suit 32, 33 34 GTR etc. Price: $100 Located in Richmond, western Syd PM if interested. Pick up prefered, I can post smaller items via registered post -
Hey guys, have a few different exhausts from Ceffy's and Laurels Twin Muffler/Tip 3" Stainless Steel Cat-back Exhaust w/ Silencers - $450 --------------------------------- Single Muffler Stainless Steel Cat-back Exhaust - $300 --------------------------------- 3" Stainless Steel Cat-back Straight Through Exhaust (rough condition - $150 All Located near Mitcham in SA, can send anywhere.
-
After a couple of things for my r34 25gt coupe (non-turbo) 1. Catback exhaust 2. GTR Z-tune front bar that fits a gt Looks like this
-
as title states 3.5" mild steel catback mid muffler resonator HKS super drager muffler surprisingly quiet. Cat and front pipe are already sold, only shit photo I have. Came off an R33 GTS-T. After $300 picked up. Exhaust is in Wollongong, could be brought to Taren Point for an afternoon meeting. Contact on 0415 954 550. -
R33gtst Nismo catback system, 80mm, has carbon around the tip, used but in good condition. pickup nothside brisbane or can fright for extra $350
-
Hi guys, Another group of parts, other post would have been too long. A few more parts that I was planning to use but have gone another way with. All items located in Brisbane. Photos will be posted below the list. 1. R33 GTR Front Bar with Lip and N1 Slots Comment: In good condition. The bar, lip and n1 slots are genuine plastic. The lip is in the best condition i've seen one in, has scrape marks and scratches etc. The bar unfortunately has had someone try to fit it on an R32 GTR ( X_X ). So the side mounting points have been cut a bit and also a hinge and bolt attached on the centre(Has caused a small crack). In the picture, there is one part of the bar that looks like has had plastic/silicon used and the bolted together. Considering the n1 slots and excellent condition front lip, i'm chasing: Price: $600 ono - Postage i'm unsure on, happy to assist. *Not willing to split unless I have buyers for each part or theres a generous offer from someone out there. 2. R33 GTR Airbox + Snorkel Comment: In pretty good condition, most of it is intact there is one missing metal clip, but it holds together fine with the remainders. No filter, cheap from autobarn/supercheap. Price: $250 + Post 3. R33 GTS-T, GTS 3" Jasma approved catback Comment: In pretty good condition, has been sitting outside for a bit, so may have scratches and marks from moving. I am unsure if this will fit a R33 GTR, I was told R33 GTST. This is JASMA approved, so I believe is below the legal DB limit Price: $450 + Post 4. R32 Nismo Lemans (?) Turbos - Has 0.60 on Front and Not 0.42 Condition: 14411-06U00 is the part number on both. I have had these stored for a long time, never used them. I'm not sure of the condition, a bit of shaft movement. Would probably safe to have them looked at/rebuilt. A/R .60 M24 Price: $400 + post 5. R32 GTR Standard Turbos, Actuators, Dump Pipes and Shields Condition: One is in good condition with a bit of shaft movement. The other got damaged when a motor blew up. The rear wheel was damaged and removed. See pictures. Dump pipes and shields are as standard. (No manfiolds). Price: $200 the lot + postage Photos If you need more photos, send me a message and i'll have it sorted. 1. R33 GTR Front Bar 2. R33 GTR Airbox [img[http://i1239.photobucket.com/albums/ff506/owgasmz/71FFAF48-0762-46CD-9357-E2E8C34A4CE7-15554-0000174E9FB43FE2.jpg[/img] 3. R33 Jasma Exhaust 4. R32 Lemans Nismo? GTR Turbo 5. R32 GTR Turbos, Dump pipes and heatshields - (MANIFOLDS NOT INCLUDED) -
.-R33 2dr Stock Catback no rust, good condition (can deliver to Sydney for cost of fuel)$140 ONO pickup -SAFC I Apexi non digital version has 5 dials for adjustments at different rev ranges (pdf manual supplied)$50 ONO -Decat GTST and GTR $30 -Genuine "CarBra' for R33 GTST and GTR fits both Series I and Series II$150 ONO items in Newcastle can post at buyers expense -
Have for sale a factory complete exhaust system that came off an Nissan 200sx s14 series 1. Includes dump pipe, what looks to be a high flow cat (unconfirmed), and cat-back with the original twin tip muffler. Has been in storage for a while, but is in good condition, hangers are all intact and still has the original heat shielding. Selling as a whole, make an offer, need it gone... $250 Pickup from Lidcombe, NSW. Contact on zero four one five 549514 -
Hey guys, Up for sale is my 2.5" custom catback exhaust coming off my 2door n/a r34. Has a resonator midway and a HKS canon muffler with a nice deep tone to it. Was put together by Blitz Exhausts in Hoppers Crossing. No leaks, have owned it for about 5 months. Selling due to returning my car back to stock standard. Asking price is about $250. Shoot me offers! Photos will be posted tomorrow Thanks Located in Western Suburbs of Melbourne. Pick up only.
-
Hi guys I have a Blitz exhaust to suit V35 Skyline coupe (should also fit 350Z if you remove about 6inches of pipe length) for sale, located in SA. prefer local buyer but can arrange shipping and negotiate a cost for freight interstate. Item: Blitz Y-pipe-back stainless steel exhaust to suit V35 Skyline coupe Condition: Used. Average wear and tear. slight rattle in mid muffler. No holes or dents. Reason For Sale: i have recently ordered a Powerhouse Amuse R1 Titan exhaust hence i'm selling this one. Description: The exhaust came with the car when i bought it. It looks subtle and sounds nice, just a bit deeper than stock and a nice growl in mid to high rpms. (obviously sound depends a lot on your other mods eg headers, cats/streight pipes, y-pipe, etc). The exhaust is from the Y-pipes back (ie. it does not include the Y-pipe), and will bolt on to your existing Y-pipe. It is a genuine Blitz exhaust, made in Japan, JASMA appoved. Fits nicely in the factory rear bar cutouts. Currently still fitted to my car, will be off in the next couple of weeks. I will update with more photos when it has been removed. Price: $300 or near offer. -
Pickup only at this stage from Mount Gravatt Brisbane.I can drop it off locally. From a r33 gtst coupe but should also fit r33 four door's. In very good condtion,Has some light scratches on the bottom. Asking $250 -
Hi guys, as title states, I'm in the market for a 3 inch (MUST BE 3 INCH) catback to suit a R32. Want something that's in decent condition, no rust/holes/dents etc. Preferably something in NSW but if from other states, I don't mind paying postage, as long as it's good Please PM me if you have anything, thanks! Josh.
-
R32 Nissan Skyline GTR: Exhaust Sounds of Blitz NÜR-Spec Catback - Free Rev & Acceleration Apologies for my terrible on-camera performance, we sort of rushed through this to get it made, ha ha. Anyways, I made a quick video on the exhaust sounds of a Blitz Nur-Spec catback on a mostly stock R32 GTR. Enjoy, lol. -
Exhaust help Hey everyone so I own a 1994 r33 gts skyline as a daily and when I got it, it came with a 4" Just jap cat back system, I've recently found out that I have a leak in my exhaust but it's coming from behind the cat, and I'm stuck in debating wether or not to replace the problem with extractors, but some people have told me I'll only be getting restriction due to my cat and have told me to get a hi flow cat, Would anyone on here be able to tell me where I could get a 4" cat for my exhaust and extractors and what brand extractors I should get? I've been looking at just jap ones I'm located in Wollongong NSW but have no problem traveling to the city
-
r33gtst nismo catback 80mm with carbon covered tip pickup Samford ( northside) Brisbane 0404481222 $250 -
Hi guys, Just a couple: 1. Sard/Denso 700cc Top Feed Injectors Comment: They fit a stock GTR rail as pictured, direct drop in. 195500-0830 is the part number. Price: $450 + $15 express post, can come with the rail for $500 posted to your door. 2. R33 GTR/GTST 3.5" HKS Super Drager/Dragger Catback Comment: This came off a R33 GTR, sounds really good. Should fit a GTST I believe from what others have said. The axle back is in super condition, must have been polished at some stage. The cat to axle has scrapes from a speed bump. See the photos below. Price: $400 + postage - Can arrange a courier, shouldn't be relatively cheap. Has a Gutted standard cat at the moment as well, will throw in for $50. OR For Sale: $75 Stock Gutted Cat + postage Located in Brisbane. Photos (If you need anymore, send me a message: 1. Injectors [[ 2. HKS Super Drager
-
Hi guys, Has anyone replaced their exhaust middle muffler with a resonator? If you did, what happened to the noise levels? I've got an R34 GTT sedan with an R33 HKS Super Drager (the one with the massive rear muffler) modified to suit, but the middle muffler is sitting really low and regularly scraping. I'd like to replace it with a resonator (to run under the transmission tunnel) but I like the relative quietness of the exhaust system as it is, so I don't really want to make it louder... Also, what catalyser would you recommend to flow 300rwkw? Needs to bolt on to 3" flanges. I'm thinking a 200cpi metal cat of some kind. I've got an X-Force ceramic high flow currently but it's suspected of restricting flow. Thanks! -
Trust Titanium Cat Back Exhaust R32 GT-R Selling a Trust Titanium cat back exhaust to suit an R32 GT-R (maybe GTS-t?) Light weight and high quality exhaust, in excellent used condition, no dents, obvious scratches, etc. Does have a few water marks so could do with a polish of some sort. See attached photos. Appears to be 3" (76.5mm) internal diameter, 115mm tip, comes with original documents & Jasma certificate. Located in Brisbane, looking for $1400 ONO, can ship at buyers cost. -
HKS Silent Hi Power Catback for 32 GTR
Gr33k123 posted a topic in R Series (R30, R31, R32, R33, R34)
HKS Silent Hi Power Catback for 32 GTR Hi all, I'm considering replacing my catback exhaust on my 32 gtr. Hearing a bit about the hks silent hi power exhaust, anyone have any details on this catback i.e. any restrictions, noise at idle and high rpm (given I'm running 19psi). Don't want anything too loud and needs to meet noise restrictions at wakefield park. Also if anyone has one for sale in the sydney area what price are you chasing?
