Search the Community
Showing results for tags 'external wastegate'.
Found 5 results
-
selling my garrett t51r. 76mm comp wheel and 1.05 exhaust housing. it is ta flange modified to suit t4 flange. twin pulse manifold with v band to dump pipe. will include v band clamp and cut off section of dump pipe with other half of v band flange. also included in the sale is 60mm exteranal wastegate and k&n filter with 3.5" 90 degree bend. turbo made 702.5 on my rb26/30 at 28psi. was an absoloute blast to drive. full boost was seen by 4350rpm and pulled all the way through. any further questions text me 0427852404 or pm location is toowoomba qld. will post at buyers expense or can arrange local pick up. chasing $1400 for the whole package, very cheap for big hp. only selling due to upgrading to gtx42 and new turbosmart gate -
Hi Guys Up for sale is a few high performance parts I no longer need (selling my car). They are all 100% brand new, still have there respective receipts and warranties, have never been used and are all in their original boxes. 1. Garrett GTX3582 turbo with t3 twin entry 0.83 A/R housing with v band clamp $2250 2. Turbosmart Progate 50mm wastegate $625 3. Venom 500 series 3.5" inlet / outlet hight flow 100 cell cat $225 4. Tomei adjustable cam gears (intake and exhaust) $275 Contact me either by email ([email protected]), sau messaging or mobile (0468778939) anytime between hours of 8am and 10pm. Thanks guys Ben -
***SOLD*** Hey guys, I'm putting on a larger turbo with bigger boost for the build, so getting rid of the big HKS GT 60mm External Wastegate. This came off the HKS T04R kit that was on the car when I bought it and has a short screamer pipe and all V band flanges and clamps included, along with the heat resistant vacuum/boost hose that isn't pictured but is included with the sale. It was holding 1 bar exactly when it came with the car back in feb. The Litre milk carton is for Scale, it's a big gate! Happy to post Australia wide if someone takes it for the asking price, otherwise happy to charge actual shipping if we come to a deal. Thanks guys! -Dave -
Hey all, I hope this is in the right topic. I've got a 2001 ER34 Skyline. I've got a question regarding External Wastegates. I've got a Garret GT3076R Turbo and a HKS External Wastegate. I'm currently using a Blitz SBC Boost controller and have had no issue until yesterday. I've had a small boost leak for a couple months now as I've needed to get a small piece of intercooler piping made up. I had the piece made up and installed it and immediately noticed that the car was idling better and I had no rev hang anymore so it was a win. The wastegate currently has a 10 pound spring in it. When I took the car for the 1st drive around the block, it was running better than ever. But as soon as I gave it, I boosted straight up to 30psi before the gate started to open. I know when it's opening as I've got a screamer fitted. The only reason the car isn't boosting any higher is because the car is boost cutting and it's splattering like crazy at 30psi. I previously had the boost controller to open the gate at 15 pound, so I turned the controller off and still got 30psi. I opened the engine bay and Disconnected the boost controller and I still am running 30psi. I haven't got a clue what's happened. Everything was fine, and all I did was just change a short pipe over, did not disconnect anything. I currently have the controller hooked back up as I've rules the controller out of being the issue. I have the controller hooked up as follows and it was working perfectly fine for around 3 years with no issue Blitz Dual-DBC Spec R Boost Controller "IN" on the boost controller to a nipple on the J-Pipe going into the throttle body "OUT" going into the top of the Wastegate Bottom of the Wastegate connecting to a 3 way T piece splitter connecting to the Throttle Body I have it connected to the Throttlw Body because the Turbo does not have a Nipple on the Compressor housing. As I said, I never had any issue with this current set up, but if it is incorrect by any means, please let me know. When I Disconnected the Boost Controller and want just Wastegate preasure. I had the Top of the Wastegate connected to the J-Pipe and the bottom of the Wastegate connected to the Throttle Body Thanks again for any help guys -
Hey guys. Bit of a noob problem here. I brought a OBX RB20/25 manifold second hand and it doesn't have a flange for the external wastegate on it. I have measured the diameter of the wastegate pipe (unsure if thats the right name) and it is 50mm. Therefore will I be able to use a 50mm flange and weld it onto there? I know it sounds pretty simple but I just wanted to check before I went a brought a wastegate and flange that was too big. thanks very much for your help. Regards Cody
