Search the Community
Showing results for tags 'front pipe'.
Found 23 results
-
hey guys cleaning out my garage the usual routine of selling stuff. R34 GTR Original Front Bar $500 R34 GTR Nismo Front Pipe $250 R34 GTR Tail Lights $250 R34 GTR Original turbos $250 R34 GTR ECU $200 HKS BOV's $500 R34 GTR Front bar diffuser ( i think ) (they were left over after i got a new front bar) $100 Open to offers aswell!! Can post anywhere, to the buyers expense. call or msg at anytime 0409076032, better off msging me than pm me as i only go on SAU maybe once a day.
-
Hey Everyone. Up for sale is my full exhaust off my 34GTR. Reason for sale is I changed my exhaust to a nismo ne-1. TRIAL TITANIUM CAT BACK - $2000 80mm (3.15'') / 115mm tip Only done 4000kms with the rear muffler on and 500kms with the mid pipe on. I purchased this through import monster at the end of last year for $2135 ( $2750 including shipping ) Asking $2000 on the basis of ive already paid shipping and its only been on the car for a very short time http://www.trial.co.jp/osaka/original/bazooka/muffler.html link to the trial website ----------------------------------------------------------------------------------------------------------------------------------------------------- CUSTOM MID PIPE - $400 76mm ( 3'' ) Only done around 3000k with this mid setion. full stainless steel and cost me $600 this mid section pipe was custom made by BEST MUFFLERS in Carlton Sydney. it has a magnaflow muffler, this mid pipe was made to substitute the titanium mid section due to it being to loud for my liking. Asking $400 as again its only been on the car a short time and goes with the titanium exhaust. -------------------------------------------------------------------------------------------------------------------------------------------------------- VENOM CAT - $150 3'' flange / 4'' body - full stainless steel Purchased for $250 Asking $150 as again only been on the car for 4000kms ---------------------------------------------------------------------------------------------------------------------------------------------------------- TRUST GREDDY FRONT PIPE.- $350 2x 70mm - 80mm biggest front pipes out there unless you get custom made ones. purchased from RHDJAPAN at the end of last year for $446 delivered. asking $350 as again only been on the car for 4000kms ************************************************************************************************************************************* Not in a rush to sell these but thought id get them up on here. with everything the car made 324kw so can flow power. I can sell these separately or all together. can ship at buyers expense. LOCATION: Central coast, NSW can meet at the end of the freeway for Sydney people PM or call/txt anytime 0409076032 Cheers Kane
-
R34 GTR intercooler $250 ono great upgrade over the r32/r33 GTR intercooler, will hit over 400kw do a search. Never got a chance to fit this to the car, as my mate sold me his old hks intercooler. Cores/fins look micky mouse and also clean inside. I made a blanking plate for the temperature sensor . Apexi Front pipe $250 ono 2 x 60mm into 70mm, made over 300kw with this. Gizzmo Shiftlight DSII $70 ono very small sleek form factor shiftlight, uses no buttons touch sensing and smd leds. Dual stage lights white and blue. The plastic mount has gone soft with heat so i used double sided tape to hold it firmly but gizzmo sell new ones for $5. Items located in Melbourne, will post at your own cost but prefer Melbourne buyers. -
Hi im looking for a bov wit adaptor to r34 gtt (er34) Also looking if anyone has a 3" dump and/ or front pipe for sale please pm and a photo would be great Cheers
-
Hi Guys, I've got the following parts for sale. PM or call me. 0421 973 558. Pick up referred. HKS Type S front mount turn flow intercooler kit. SOLD Unknown Jap stainless long split front pipe. As arrived from Japan. Good condition, minor scrape on bottom. Has had an o2 bung welded into it. Has bracket to mount to gearbox. 3" flanges, splits into 2 2.5" pipes and merges back into 3" pipe. Beautifully made. Great for getting low and staying legal. SOLD Stainless split dump pipe. Good condition. SOLD High flow 2.5" cat. Great condition, no blockages. Upgraded to 3" cat. $50 Stainless Steel door plates to suit R34 4 door. Fantastic condition. Will be a shame not to fit them to the car. Selling for a lot less than I paid to get them here from Japan. Black mark on front door plate rubs off. NO LONGER FOR SALE R34 Instrument panel dress up panel. Carbon fibre overlay with chrome gauge rings.Excellent condition. Very nicely made. As arrived from Japan. NO LONGER FOR SALE URAS R34 4 door roof spoiler. Brand new, as arrived from Japan. Not painted, but in black gelcoat. Perfect fit. SOLD Factory R34 4 door rear lip Genuine series 2 rear boot lip. Has clear LED brake light. The rear lip was damaged in transit from Japan but is repairable. SOLD R34 Series 2 front bar Fantastic condition. Complete with grill, badge and clear indicators. As arrived from Japan. I only unwrapped it tonight to take pics! $250 4 door weather sheilds Excellent condition. Didn't even make it onto the car. Hard to find in good condition. $200. R34 4 door window switches Good condition. Series 2 so it has a Joystick for mirrors. NO LONGER FOR SALE R32 GTR front lip Reasonable condition. small crack in plastic near mounting tab. Will need paint. SOLD More parts and pics listed below as the forum wont let me upload so many pics in 1 post. Cheers Scott -
I am wanting to buy a 3inch 5 bolt dump pipe for my GT3076 turbo, preferably a split dump where the wastegate gasses meet the pipe further down. Alternatively If someone is able to fabricate one please let me know as well Car: R33 GTS-T Location: Melbourne SE
-
Hi guys, Was planning to put this stuff on the car but can't be assed anymore, some cash for christmas would be handy too, so these are up for sale, all are new and unused. 1. JJR Mild Steel Bellmouth Dump/Front Pipe for R33 GTS-T I think R32 GTS-T too Condition: New, still wrapped, some surface rust due to being mild steel and in storage. Price: $170 firm, not willing to post. 2. Genuine Nissan Turbo to Dump Pipe Gasket for R33 GTS-T Condition: Brand New No pics, you know what they look like. Price: $30 firm + Post If bought with bellmouth dump, can do $190 for both. 3. Hel Braided Brake Lines for R33 GTS-T, carbon colour. Condition: Brand New Price: $110 firm + Post Located in SW Sydney, prefer cash on pick up. Cheers, Mike -
Hey guys, Currently doing a engine rebuild/single turbo so need to sell stuff to fund.... RB26 Turbo kit. 2560s, Stainless split dumps, exhaust manifolds and front pipe. $500. One turbo is seized other is OK. Rebuild and then have a cheap turbo kit. Was never boosted above 16psi. R32 GTR Intake piping&Pods(everything from turbos to pods, afms included) $350 If you want the turbos and intake piping, will do it all for $750 R32 GTR Stock intercooler piping, $250 R32 GTR Dash cluster showing 149k. $200 R32 GTR Dash cluster showing 119k $250 R32 GTR Stock Electric Mirrors(Black) - Good cond, $250 Alpine Type R 15" 1000rms - New. $300 R32 GTR Stock ECU $250 RB26 Stock cam shafts $100 R32 GTR DBA4000 rotors, $25 each or all 4 for $75. Will need to be machined. R32 GTR Rims 16x8+30 with Full Slicks. 1k. All center caps. Good condition. Set of 4x114/4x100 Rims, white inners chrome lip. 17x7+35. $400 nego. no tyres pics on request. Standard S15 brake calipers, $50 Monza fuel pressure reg with lines. $40 3" Straight through cannon. $100 3.5" Straight through cannon $150 Unpunched Nissan Stock cat convertor. $250 two of them for sale. FULL R34 Auto Wiring loom - From fusebox to ecu. $250 Rb20/25/26 CAS (Cam angle sensor) $150. Used but good condition Metallic sump plug for R32 gtr $50 - new in packaging 6x Matte Red cans of Plastidip 6x Blaze Green cans of plastidip. All cans $30 each 6x Clear Matte Will swap items for a Single turbo capable of 750hp+ or a set of coilovers for R32 GTR with cash either way. Most prices are negotiable, ask. Worst I can say is no. Shipping available on most items at buyers cost. All items located Sutherland shire NSW or Ultimo. Alternatively, travel to ACT every two weeks for work. Will add more bits as I find them!
-
Hey SAUer's, need to clear items asap! Location is in Patterson Lakes 3197 (South East Melbourne), VIC Prices are negotiable. Contact details: OJ on 0423 932 035 (text, call or PM) R33 Parts Parts off a 96' r33 gtst R33 Black Boot lip/ Drift wing - $180 R33 Stock turbo (no actuator) minor shaft play - $150 R33 Stock turbo (with actuator) major shaft play - $200 R33 Black Rear left tail light (has small crack in it) - $60 R33 Indicator (working & good condition) - $40 R33 lowered suspension set (1x rear leaking, the one with the duct tape around it) - $180 R33 stock suspension set (good condition, just took them out recently) - $220 R33 stock front pipe with cat together - $200 R33 drive side headlight (series 1) (has molded mount) - $80 Kicker 6x9 parcel shaft speakers (still works) - $80 Lenso Rims 19x8+2 set (all round), excellent tread front and back. front 235/35/19 (achilles rubber) rear 245/35/19 (Zeetex rubber) was a silver with polished chrome lip until i plasti dipped them black. (see my skyline photo of what they used to look like) 180sx Parts Parts off a 96' type x. Fujitsubu 3" exhaust front pipe back (with decat) - $500 Stainless steel 3" front pipe for 180sx, has a 2.5" inlet - $80 Stock Springs (front and rear) - $150 180sx Garret stock turbo (minor shaft play) - $180 Holden Part Part off a VL Commodore whole set of Holden 15" stockies (bald tyres) - $140 Location: Patterson Lakes 3197 (South East Melbourne), VIC Prices: All negotiable! Contact details: OJ on 0423 932 035 (text, call or PM)
-
Hey guys, Just wondering if it's possible to replace the front pipe on a RB26 using car ramps? If so are there any tips, tricks, recommended tools to use etc? I would rather do it myself as I have the time and don't want to pay over $1000 for the local mechanic to fit them as I was quoted. Any help is greatly appreciated, thanks in advance!
-
The following parts fit on a r33 gtst series 2. most probably series 1 too. -Autotecnica sequential BOV with adapter and ready to fit (can swoosh and flutter, hardly used as you can tell)- $70 -Standard intercooler with pipe and container shown below- $100 -Standard Front pipe and dump pipe ( no holes but a few scratches shown below) - $100 -Brake pads (Not sure of brand, might be bendex - used for a week practically new)- $80 all four -Rear strut brace without elbows - $80 All prices exclude shipping. Pick up arranged from sydney western suburbs. pm for further details. Thanks All these parts came off my Gorgeous R33, just to show it off a little -
ITEMS LOCATED IN EASTERN SUBURBS MELBOURNE ITEM: Custom dump and front pipes to suit RB26. These were taken off -5s so it should fit most applications. Bell mouth dump pipes into custom front pipe which measures 3" into a 3.5" Y-pipe into a 3" flange. These came off a 320kw GTR. CONDITION: As seen in photos. REASON FOR SALE: Bought these on a whim, never bothered to have them installed because I'm not making that much power anyhow. PRICE: $250 for both ITEM: Power FC L-Jetro (PFC GTR33L 020-0992) with hand controller CONDITION: Good; been bubblewrapped and stored away. Have not had it installed/tuned since I bought it. REASON FOR SALE: Not chasing any more power, not being used. Came off a 320kw R32. PRICE: $850 Please PM if interested. Thanks. -
RB26 Aftermarket Dumps and Front Pipe Hi All Selling the following; - X Force dump pipes to suit RB26, stainless steel, divided type dumps. Came off a 32, will likely fit 33 and 34. - Aftermarket front pipe. Brand is unknown but is a quality piece. Made out of stainless and has a flex in it. Inlets are 70mm or just shy of 3". Outlet is 85mm or bit over 3.5". Mates up to the standard cat/exhaust position. Has a small dent on the underside to scraping. Has no effect on performance what so ever. If you think it does youtube Motor Trend Engine Masters Episode 4. What they do to headers is nothing compared to my dent lol. Prefer pick up, posting that front pipe would cost a bomb. Take the lot $400. -
wtb EBC,dump&front pipe, cat for r33 Want to buy a decent eletric boost controller, 3inch dump&front pipe and cat for my r33 gtst s1. Located in Glen Iris, VIC. Will travle to pick up if not toooooo far. PM me. Thank you.
-
Hi All, I have a Nismo front pipe that I never got around to fitting to my R32 GTR. Part number is 20020-RN580. It may suit other models but please investigate this for yourself. As you can see, it does have some scratches but there is no other damage and they will not impact on its performance. Genuine Nismo parts like this are hard to find and extremely well made. It is made of stainless steel and has dual 60mm inlets and a 3inch outlet. Price is $300 and pick up (from Glebe, Sydney) is preferred. Thanks -
Help me identify my front pipe Gents Can anyone help me identify my front pipe? I'm trying to work out if it's a standard R34 GTR front pipe, or an aftermarket one. Possibly a blitz front pipe? I can't find any tags anywhere and the car is pretty low, so it's hard for me to see.
-
Rb26 3.5 inch Front pipe & Turbosmart boost solenoid Big front pipes Custom Twin 2.75 inch - 3.5 inch front pipesNo drop downs, true 3.5 inch front pipe. I went through 2 or 3 different front pipes trying to find the best flowing itemOnly selling due to single turbo swapLocated sydney $250 make an offer Turbosmart boost solenoid Brand new, wasn't needed$100 make an offerLocated Sydney Send me a pm or comment on here, cheers -
Hi everyone Going single so these parts not needed anymore. - 2X Garrett 2860-5's , Done around 12k was working perfectly with no shaft play $1500 - 2X Tomei Dumps 70mm inside diameter , done 12k $500 - Front pipe 2X70mm to 90mm done by CRD (1 pipe has been scraped on my driveway but still good, but might need fixing soon) $200 Pick up ONLY in lower north shore Sydney Pictures not loading so text me for pics O408844383 Thanks Bruce -
nsw/act Apexi GT Spec Down Pipe
GTR ZOAH posted a topic in For Sale (Private Car Parts and Accessories)
For Sale: Apexi GT Spec Down Pipe (Part Number 145-N001). Constructed of fully polished SUS304 stainless steel. Piping Diameter is 70mm x2 - 80mm. Down Pipe has been modified with A/F Sensor Adapter. Removed due to going single turbo. Location: Lansvale Sydney. Price: $400. -
JJR Stainless Front/Dump pipe for R34 GTT - $100 R33 Clutch Master and Pedal - $50 Located Werribee or Geelong -
All items located 2210, Sydney. Will post at buyers expense Send me a pm for more info R34 Dump pipes Stainless steel Good condition Better flow than 32 & 33 items Bigger outlets than 32 & 33 items (60mm) $250 ono Kakimoto Racing R Catback R32 GTR Full 80mm exhaust Stainless Over $1000 shipped new - http://www.nengun.com/kakimoto-racing/kakimoto-r Nice sound Good condition $400 ono Impul Front pipes 70-80mm Discontinued part, pretty rare Great condition, awesome looking part comes with 3 gaskets Suits R32, R33, R34 GTR $200 ono Custom 2.75 - 3.5 inch Front pipe Stainless 3.5 inch outlet tapers to 80mm at the flange would be easy to cut and weld bigger flange suits R32, R33, R34 GTR $200 ono
-
For Sale - RB26 Front Pipes. These have been in my shed too long. I'm not going to use them like i thought i might. Pipes themselves are in ok condition. Some manipulation of the pipes has been undertaken by a previous owner/workshop. The gaskets are still in place, so some obvious cleanup is going to be necessary. The tabs (for mounting) are also mostly missing, so suggest you have a welder handy. You may want to remove the heat wrap too. It was there to support my custom turbo setup (different turbos, same position), so it may not match any one else's requirements. The exhaust was on my car originally when i purchased it and was good for 500kw so there shouldn't be any issue with these. However, with that said, i'm not an expert, please come and inspect them yourself if you have concerns. (Emphasis on this line!). Prefer pickup only, but if buyer wants to arrange their own interstate transport, i'm cool with that too. Selling for $50. Nothing wrong with them, just want them out of my life. Edit: I'm in the inner Northern Suburbs of Melbourne. Best contact is here on the forum (i'm a lurker). We'll move to PMs for my details.
-
Hi all, I have my mines front pipe pro up for sale. This pipe has travelled less than 1,000km. It is still currently on the car and will be ready for dispatch on the 12th of October. As you all know, if you want a great sounding twin turbo RB then you need the mines front pipe in your inventory. Flowing 340kw on my setup. The usual wait for this pipe is 6 weeks plus and then shipping on top of that (took me 8 weeks from day of ordering to my door step), each one is made to order from Mines Japan. All in all this pipe will cost you over $1,000 new especially with the aussie dollar taking a dive. I'm selling this in great condition for $850 located on the Central Coast NSW Pictures of actual item will be up in a few weeks time.
