Search the Community
Showing results for tags 'gtx3582'.
Found 2 results
-
R33 Parts Cleanout! Garrett Gtx3582 + turbo manifold + exh + 2 sets of rims drift tek + rotors + sway bars Hi there Doing a big shed cleanup. GOLD COAST VARSITY LAKES All parts off my R33 gtst s2 1996 Genuine Garrett GTX3582. T3 .82 ( i think) little bit of shaft play + 32mm Go Pipes Turbo manifold dual 40mm wastegate. (A few tiny pinholes need a spot weld) + full 3.5" dump pipe and 3" exhaust including cannon and resonator (and pipe with flange to replace resonator) ALL 3 $2500 will split if asked R33 s2 brake rotors set of 4, little surface rust, pretty good life left $20 R33 s2 sway bars front and rear $20 ea R33 crank needs a linish $20 18x8 silver FX motorsport wheels, hero tyres on front good tread, rear micky thompson no tread, removed from r33 $300 18" black drift tek style wheels, front 18x9.5 225 40 18 good tread, rear 18x10.5 235 40 18 no tread, removed from r33 looked awesome! Only changed wheels to get more rubber on the read, $800 -
Garrett GTX3582 + Turbosmart 45mm Gate + Dump pipe + Bolt on + Buy please GTX3582, pretty low kms (less than 10K), working fine, boosting well, no shaft play. Has a Turbosmart 45MM Hypergate welded into the housing (T3 0.82) by Scotty Fisher (www.scottyscustoms.com.au) which holds boost like nothing else. Have been able to really just choose any amount of boost and it'll just hold it, I've ran between 4PSI to and including 28psi on the same spring. Have extra springs for the Wastegate if you want to be super hardcore. Also included is the dump pipe, but you'll need a flange to fit it to your exhaust (at the cat end) as it was custom made. I do *not* have the screamer as I have re-used it for my current setup. Dump is a really nice 45deg angle pipe, fits a skyline no issues whatsoever. Suspect it'd fit most things. Seems to flow really well, made of stainless. This will bolt directly to a RB25/20/30 stock manifold and it will fit. I would recommend a spacer to be 200% sure, as I just used 3 gaskets which is quite a bit ghetto but never leaked. Comes with the second hand lines I was using if you want them. $2000. Would prefer local pickup/delivery but I can ship it at buyer's expense etc. Would prefer not to seperate as it's a good little package as is for a RB30 or RB28 or RB25 if you really are all about that lag and unsafe levels of power for a stock engine. Yes it looks a little used, because it was used and actually works entirely fine as opposed to sitting around being hard parked.
