Search the Community
Showing results for tags 'indicators'.
Found 13 results
-
1992 HCR32 GTST - REAR END DAMAGE. COLOUR: GUN METAL GREY Location: Holsworthy NSW 2173 PICKUP IS PREFERRED, HOWEVER POSTAGE CAN BE ARRANGED AT **BUYERS** EXPENSE. Contact; PM is preferred or SMS to 0435 120 602. If you wish to talk over the phone feel free to try ringing me, however reception is bad and i cannot answer my phone during work hours. Also pretty busy on weekends.. so good luck! If someone wants the shell whole, let me know and we can discuss a price. Please ask for parts if not listed, the whole rolling shell is available (bar a few items). I will list the big ticket items. Car needs to remain rolling for the time being, so suspension / 5 stud / brakes will be sold last. Everything is as pictured, if you require more pictures please notify me so that i can attain them for you. Please NOTE ** ENGINE AND GEARBOX + TAIL SHAFT ARE NOT AVAILABLE. Please NOTE ** ALL PANELS ARE GUNMETAL GREY, EXCEPT CARBON FIBER BONNET .. IT LOOKS LIKE CARBON FIBER.. AVAILABLE NOW; Front bar as pictured (pretty average condition, would suit drift pig) - $50 Front Reo - $100 Front Sway bar - $40 Rear Sway bar - $40 Smoked out indicators (mint condition) - $80 LH + RH Doors (passenger door near mint, drivers side average condition - $100 ea. RB26 FRONT PIPES (twin 2.5" inlets to approx 3" rear) - $150 Aircon / Heater Vents all available except drivers lower vent - $100 for all (purchaser will need to remove most likely) ?? LH + RH OEM Indicators (mint) - $150 pair Windscreen Washer bottle, not leaking - $20 Coolant Overflow Resevoir, not leaking - $20 Power Steering Resevoir, not leaking - $20 Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - $80 for pair Rear Seat excellent condition - $50 Centre Console in ok condition - $50 Faschia Surround, one clip broken apart from that decent condition - $50 Seatbelts FRONT ONLY ADR APPROVED - $20 Rear Window Wiper Motor / Blade Assy - $20 Skyline Door Trims, both in good condition - $40 pair Fuel Flap - $20 GTSt OEM Spoiler w/ Integrated brake light - $80 2 x K&N Pod Filters suit RB26 - $150 Standard LSD, still nice and tight - $200 ALL GLASS AVAILABLE IN GOOD COND - BUYER REQUIRED TO ORGANISE REMOVAL PRICE: TBA ?? AVAILABLE LATER; Tien Super Streets - condition TBA - price TBA R32 GTR Front + Rear Brakes w/ DBA4000 Series Rotors front and rear with pleanty of life. Unsure what pads are on there but they are yours regardless. Can also sell 5 stud conversion / hubs etc.. - $400 for Calipers / Rotors / Pads. Hubs will be extra. I also have some gear that i'm not sure i want to sell.. however let me know if your really keen.. and willing the pay the coin. Genuine N1 GTR Headlights, Immaculate - $350 pair Mu's Secret Carbon Fiber Bonnet w/ bonnet pins - $100 LH + RH Side skirts (good condition) - $200 pair LH + RH Guards in decent condition - $200 pair R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - $300 Trust Front Mount I/C NO PIPING - $150 -
1992 HCR32 GTSt / GTR misc parts. 32 GTSt smoked out indicators (no globes but in perfect working condition with all mounts unbroken) - $80 32 GTSt original tape deck / headunit attached 32 GTR Projection headlights (pair) - $200 Location; Holsworthy NSW. Can post however pickup is preferred. Contact; 0435 120 602 - SMS is preferred as i can't answer phone during work hours / reception is bad. PM will work also thanks.
-
Looking for good condition front corner indicators for an r32 gtst. must be complete ie with no broken tabs. preferably located in Melb. text me on 0423 066 275
-
Hey all, Just wanted to share a little about what I have been working on in my spare time. This little project has allowed me to regain my sanity as I have been recovering from a serious motor bike accident over 10 months ago. Some of the tools used for this fab were; bench grinder, vernier, various files, marker, ruler, jig saw, drill with small cutting disc supplied in dremil kit, drill press. Recently I purchased a MASA style front bar for my S2 stagea off one of the boys here on the forum. Supplied with the bar was a set of LED indicators & some blanking plates made out of aluminium. While I did like the idea of the blanking plates I wasnt sold on the idea of the rubber surround for the indicators, so I set about thinking about how I can fab some blanking plates to fit these LED lights into. I had a bit of scrounge about the place & found some pieces of perspex that would do the job nicely. So far I've been working on this for aprox 5 weeks on & off, the idea is to make something similar to the factory indicator housing. As perspex can be a little tricky to work with & I'm no gun in fabrication but I knew how I wanted it to look. The idea was to fab it out of several pieces & use araldite to hold it together. After several discussions with the old man (MAD SCIENTIST) as his colleagues at the railways liked to call him, we decided that not only would araldite be used but after both sides were completed they would be given a second skin of fibre glass for added strength & that smoother factory look (I hope). Anyways, here are a few pics to get you started....... LHS COMPLETED....... The rest of the pics can be viewed here http://photobucket.c...abrication_pics
-
R34 GTT 1998 My indicators have just stopped working as I got to work today. Hazzard lights dont work either. However my alarm works just fine and unlocking/locking the car with the alarm lights them up. Depressing the hazzard lights button I hear the relay click once under the steering wheel. When the alarm ticks the indicators, it seems that it is slightly faster than usual... not a broken indicator though - Maybe it bypasses the relay? - i dont know... I can't find the fuse for the indicators, but the fact the alarm runs them fine makes me think this is not an issue, unless the alarm bypasses the fuse and relay. Any tips? Thanks
-
Hi guys, Have the following parts off a Stock R33 skyline series 2 gtst - Front right series 2 guard in silver (perfect condition) - $100 - Stock series 2 R33 fuel pump (taken off at 60,000km due to upgrade) - $50 - Stock dump pipe and cat - $50 - Front left & right guard side indicators: $15 - Also have stock turbo heat shield with mounts & bolts: $10 - Charcoal Canister - $15 - Plastic coolant overflow bottle $15. - Series 2 AFM - $70 Located in Melbourne. PM me if interested. -
R33 gts/ gts-t side indicators. Used. Good condition. Comes with some assorted brand new genuine Nissan intake manifold gaskets. For photos see: http://www.gumtree.com.au/s-ad/beldon/auto-body-parts/r33-skyline-side-indicators/1062491303 $20 make an offer. Located in Perth Northern suburbs.
-
selling project mu hc+ f206 r206 pads front and back used for less than 50km supplied with shims, pads and shims together worth more than 600 operating temp from 0-800c asking 350$ ono also have nismo clear indicators off a 34 gtr vspec 2 supplied with bulbs good condition bulb socket a little worn nothing some tape cant fix $50 located parramatta nsw willing to post -
I have some parts left over from my build that need to go. All parts are in working order and can be posted at the cost of the buyer. All parts were taken from a 1996 R33 GTR V-Spec. There are no dibs. You pay for it, you get it. Ross Performance Nissan Skyline R33/R34 Metal Jacket balancer - $480 This balancer is top of the range and was used for the run-in and tuning while I was waiting on my ATI unit. Has probably 2000km use. Perfect condition, retails for $650. Ross Performance Idle Tensioner Pulley kit - $100 This kit stops the issue of the power steering belt coming off the b alancer. Comes with Bolts to fit. Has 1000km use. Almost new condition R33 GTR Taillights - $130 Perfect working condition, were replaced with Quest taillights. No covers only lights. R33 GTR Triple Gauge Cluster - $55 Perfect condition – work perfectly R33 GTR Front and Side Indicators – Amber - $40 Still work, in good condition Rb26 OEM Headgasket - $20 Still in box, what more do you need to know? Exhasust Gaskets - $15 Gaskets for dump pipes X 2 and 3.5 inch flange Gaskets X 2. Unused All parts are located in Canberra ACT -
Located: SW Sydney Contact me via PM Can post (at buyer's expense) as the items are in boxes. R32 GT-R orange (standard) indicators. Good condition, only has very light (barely visible) scratches on the lenses. The rear is good, no broken bits. There are some bulbs floating around in the box, I haven't checked them. Replaced these with smoked ones. $80 Morimoto 3Five 35W HID kit with H3 4300K bulbs. Used for about 5 minutes (to test if they worked and align projectors). Bought as a spare to sell with retrofitted R32 projectors, but haven't done the headlights yet. $120 -
hi, cleaning out my garage and this is a bunch of bits and bobs ive had left over after owning GTR's for 5 years. was keeping them as spares etc, but car is gone, no longer need them. Most are off a R34 GTR. but alot of them fit r32 r33 and gtst skylines etc. R34 GTR factory suspension/coil overs $200 ono (good for spares incase of yellow) GTR factory front camber arms $50 R33/R34 factory washer bottle $10 R34 GTR front and side indicators $30 for both pairs (including bulbs) R32/R33 single coil pack $20 (used as spare to diagnose problems etc) GTR rb26 front left+right intercooler piping $20 each GTR rb26 air intake pipe $15 Rb26 heater/coolant hoses $20 the lot GTR rb26 factory air snorkal $20 (rare to find) high pressure rad/factory rad/oil/ caps $5 (lol) It felt like a shame to through this stuff out. Prices are well below what any of this would set you back for wreckers. just make offers want it all out of the garage. if you want more than one thing make an offer. sorry it wouldn't work when i tried to upload pics, so here is a link to the photos Call or text on 0432497290 http://www.gumtree.com.au/s-ad/dianella/brakes-suspension/r32-r33-r34-gtr-factory-parts-suspension-indicators-piping-coils/1051085603 -
Hi all, Some more parts up for sale. 4 x R32 GT-R OEM Wheels Price $500.00 (pick up in Melbourne only) Reason for sale: upgraded to Alpha Omega Racing EVO Brembo Brake Kit so these will no longer fit Notes: A few chips and gutter rash as shown in the photos below. Tyres are not great (you can have them for free!) Centre-caps are included Wheel 1: Wheel 2: Wheel 3: Wheel 4: R32 GTR OEM Front Indicators Price: $150.00 (will post at buyers expense or pick up in Melbourne) Reason for sale: replaced with smoked indicators Notes: Includes plastic indicators and bulbs only Wiring loom and sockets that hold the bulbs in place are NOT included Tabs are intact R32 GT-R OEM Front Brakes Price: $250.00 (will post at buyers expense or pick up in Melbourne) Reason for sale: upgraded to Alpha Omega Racing EVO Brembo Brake Kit Notes: I believe that the rotors are RDA and not the original OEM but not 100% on that The pads are shot and need to be replaced I will have the rear brakes available once they have been upgraded to the Alpha Omega Racing EVO Brembo Brake Kit Please contact via PM for further details. Cheers Rob -
Hi guys, Since selling the S15, I have some aftermarket parts which the new owner doesn't want. Located in Bexley PM if interested. Kevin - Replica V1 Top Secret Carbon Fibre Rear Diffuser (new) - $500 - Beame branded Clear side indicators - $30 - ADM Steering Wheel - $150 - Greddy Type FV BOV with adapter $150 - BBS LM 17x9+20 (silver centres) with 245/45 Bridgestone tyre (plenty of tread) - $2300 - Replica V1 Top Secret Carbon Fibre Rear Diffuser (new) - Clear side indicators - Greddy Type FV BOV with adapter -BBS LM 17x9+20
