Search the Community
Showing results for tags 'muffler'.
-
Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome Thanks in advance
-
for sale is a near new Varex volume changing muffler by xforce used for 5 days. i bought it and decided it wasnt loud enough for my liking so removed it after powercruise. selling for $7"00 or make a REASONABLE offer. 3"inlet to twin outlet i think 2.5" a side. was fitted to my r32 GTR custom so will bolt straight onto an r32 GTR with included pipe section or any car just about just by changing the mounts as this is a generic ft muffler. Texts prefered 0403 22 77 67 inboxes welcome -
Hey, I have a Tri-flow muffler (straight-through design) muffler for sale. Stainless steel, honeycomb construction, 2.5" opening. Includes hangers and connecting pipe. It's only been used once, for about 50km, because it was too quiet for my hooning needs. Good condition, no longer need it. $50. Call me on 0449 098 325. Here in the ACT. Pick-up preferred. Here's a photo for illustration purposes only.
-
Hey all got Some leftover stuff and spares that im looking to get rid of as i have no need for any of it. Stock r34 gtt cat and Part of the exhaust and a made up muffler thats was made to past epa. Cat, pipe and muffler 50$ Fujitsubo jasma Muffler, 3" inlet and 4" out looking for 90$ ono Located in melbourne, Contact me via pm or can text on 0433659311 Cheers -
Looking to buy coilovers for my 2000 model r34 N/A. Aswell as a muffler with 2.5" inlet.
-
Hey guys, I have an r34 GTT X Force stainless steel 3.5 inch cat back exhaust including aftermarket cat for sale. Photos will be up tonight of it. All in good condition, came off my r34 gtt. Bolt on directly. Reason for sale: upgraded and changed to full ti exhaust. Location: S.E. side of melbourne, pick up or can ship at buyers expense. Contact: p.m. me please. Price: $250 -
r32 skyline gtr Hi Guys going through emmisions and need a stock rear muffler so I can weld in a section to make it more 'street legal' dont want to spend a lot of dough as it will only be on there for a week or two, Just need a rear r32 muffler I can weld a section to fit the current exhaust. thanks in advance. Sydney based so the closer the better Chris 0411 577 310
-
Hi guys looking to sell my old hitech exhaust system plus front pipes... I think the front pipes might be apexi - These have come off a R33 GTR Had a pretty good exhaust note when it was on the car looking for $600 for the lot Pick up only ! pictures : Location: Campbelltown Contact: 0448095760 -
Hi Guys, For sale I have this Magnaflow muffler which came off my R33 GTS-T. Has been re-flanged so will bolt straight up, welds just need to be cleaned up with the use of a grinder or such. Could also do with a clean up using some metal polish so the photos don't do it a lot of justice. These brand new are still $400ish on ebay. Also you will find most of the magnaflows for sale will have the 2.25inch inlet not the 3inch one like this one. Fits into the GTST standard rear bar perfectly. Specs: 3inch inlet. 4inch internal. 2x 3" twin tips. Price: $50 - will post Australia wide for extra. R33 GTS-T Series 2 Spoiler off my 96 model. Perfect condition. Original white. Stock spoiler. $100 ONO. Can probably post via a courier company Australia wide. -
FOR SALE .................... magnaflow muffler hangers may suit r34 gtt skyline i believe is it is the following specs Inlet/Outlet Size: 2.25in./4in. Body Shape: 5in.x8in. Oval Core Size: Dual 2in. Body Length: 14in. 200 ono located Melbourne south east
-
in the hunt to buy a big rear muffler maybe something Jasma or nismo. 3 inch or 3.5 inch inlet. located in Melbourne south east but will travel for the right muffler thanks
-
WTB- Big Rear Oval Muffler (vic) Hi guys, looking for rear muffler ( big oval type ones) 3-3.5" prefer vic
-
Used R35 exhaust parts for sale Hi everyone, I have a few exhaust parts for sale on an R35 GTR 1, Meisterschaft SUS GT racing exhaust ($1999) This exhaust is made of 304 Stainless steel, TIG welded, OEM fitment, Tail pipe size: 4*130mm 2, COBB catted mid pipe, 200 cell count ($800) & Password JDM catless midpipe ($400) 304 stainless steel construction, Dual 3'' to single 3.5'' Merge, TIG welded, direct OEM replacement, large gains in HP&TQ I bought all them from US in 2015 and have done only 200KM with PasswordJDM catless midpipe & meisterschaft rear section, then change midpipe to COBB catted one, because whole catless setup produces too much soot. (I have done 1500KM with the new setup) Items are all in excellent condition and they are located in Sydney CBD. I can do free delivery to anywhere in Sydney. Any inquiry please contact me on [email protected] or 0422 428 967 Cheers Gerard -
Hi buddies, just moved to Sydney from Adelaide with my M35. I got a cat-back exhaust for S15 yesterday and just wondering whether it suitable for M35? or I can only cut&fit muffler (spec-pro, part number B0100-90F25) to M35? or totally i can't fit anything on my M35?
-
1. Stock front pipes off r33 gtr, should also fit r32 and r34? Good condition for age. Heat shield is scratched up but pipes are fine. Flexi pipe in good condition $60 2. This exhaust was made recently to comply with EPA standards and so garanteed to be under legal db limit. It is in great condition with minimal scratches . Basically a new version of the original size exhaust Was previously fitted to an R33 GTR and will also fit GTST Exhaust is small, 2" inch diameter with resonator and large rear muffler and shiny 4" inch tip. $200 3. Generic brand high flow cat. Came on the car when I bought it, looks relatively new and was told it flows much better than stock Inlet and outlet both 2.5" Should also bolt straight onto: - Nissan S13 - Nissan Skyline R32 GTS-T - Nissan Skyline R32 GTR - Nissan Skyline R33 GTS-T - Nissan Skyline R33 GTR - Nissan Skyline R34 GTR - Nissan Cefiro A31 - Nissan Laurel C33 - Nissan Stagea WGNC34 - Nissan 300ZX Z32 - Nissan Pulsar GTi-R $50 4. Old high flow cat (assume jap brand as the exhaust had a jasma stamp on it but not sure ) Catalytic converter has stock size inlet but larger 3" inch outlet for better flow and to match a 3 inch cat back. Should also bolt straight up the the list of cars above. $50 5. Stock dump/front pipe off an r33 gtst. Used but in good condition, still has original heat shielding $50 Contact me on zero415 549 514 Pickup from Lidcombe, NSW -
Hi guys, Has anyone replaced their exhaust middle muffler with a resonator? If you did, what happened to the noise levels? I've got an R34 GTT sedan with an R33 HKS Super Drager (the one with the massive rear muffler) modified to suit, but the middle muffler is sitting really low and regularly scraping. I'd like to replace it with a resonator (to run under the transmission tunnel) but I like the relative quietness of the exhaust system as it is, so I don't really want to make it louder... Also, what catalyser would you recommend to flow 300rwkw? Needs to bolt on to 3" flanges. I'm thinking a 200cpi metal cat of some kind. I've got an X-Force ceramic high flow currently but it's suspected of restricting flow. Thanks! -
vic Magnaflow twin tip muffler.
vxsr33 posted a topic in For Sale (Private Car Parts and Accessories)
Hi guys, i have for sale a new and unused magnaflow twin tip muffler 3 inch outlet, twin 3 inch tips. Perfect condition Was going to fit it to my car but as you can see in the picture the inlet diameter reduces to around 2.5 inches where the piping splits. I was OCD about having 3 inch piping the whole way through so i decided not to fit it. Probably one of the best looking mufflers in my opinion, i test fitted it on my 33gtst and it looked perfect. Selling for $250 firm. These are $400 new. Located Melbourne, will post at buyers expense. 0413 103 732 -
WTB Stock V36 mufflers I'm chasing some V36 stock exhaust mufflers. Located 2203 Sydney
-
3.5" 90mm CAT BACK EXHAUST R33 GTR WTB REQUIRE 90MM EXHAUST FOR R33 GTR WILL LOOK AT FRONT PIPE ALSO MUST BE 3.5" FLANGE CONDITION IS NOT AN ISSUE
-
R33 Nismo muffler on R34 Hey guys I've tried looking around but I can't seem to find what I'm looking for, I've recently bought an R33 Nismo muffler, i want to know if its a straight bolt on for an R34 GTT any one have an answer for me ?
-
Hello guys, I am from europe and I recently imported a Skyline r33 gtr. Right now the car is equipped with HKS Super Drager Muffler. My question is: Is it possible to create an angled exit with this Muffler by welding a pice into it? And will it affect the sound quality of the car? BR
-
Interested in looking for a relatively cheap good condition second hand catback exhaust. Don't want a system that changes in pipe diameter or has internal baffles or restrictors. I'm extremely picky with how mufflers/resonators look and how they sit. Preferred 3" all the way through. Must be free flowing. My hks super drager muffler has collapsed internally and cannot source a new one as they as discontinued.
-
I have a Fujitsubo exhaust that came as a spare with the V35 I bought. I have no need for it so it's up for sale. Located on the southside of Brisbane but willing to post at buyers expense. There are a few minor scratches/scrapes as seen in the pics but no major damage/dents. Very nice looking and sounding exhaust. $450 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 -
I have a Fujitsubo exhaust that came as a spare with the V35 I bought. I have no need for it so it's up for sale. Located on the southside of Brisbane but willing to post at buyers expense. There are a few minor scratches/scraps as seen in the pics but no major damage/dents. Very nice looking and sounding exhaust. $450 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589 http://imageupper.co...364477841129589
-
For sale is a stock R33 exhaust system pictured below. The cat is near new (I purchased brand new and only used it to pass EPA inspection - which passed, I can show the papers) Price: $200 Phone number: 0413 550 783 Location: Campbelltown, NSW
