Search the Community
Showing results for tags 'need help'.
Found 6 results
-
I have an R33 GTS-T mid drift the p/s belt snapped lol i have the new belt 3PK845 (early model 33) but when i went to change the belt i noticed what looked like a slider to adjust the tension of the power steeering belt but as i loosened it off the pump and pulleys were still tight am i missing something? any help would be great need to be fixed asap
-
hi guys my floor under the drivers side is getting wet im just wondering what firewall grommets could lead to the drivers foot well so i can check them its only happening on the drivers side so therefore it cant be the heater core anyone know other areas where water can leak in from the out side and end up on the drivers side foot wells?? ive also had a look at those funny green seals below/ under the scuttle tray and theyre in place. need help as carpet is starting to really smell cheers.
-
Hi my skyline is running very badly and limp mode is on what am I looking for to fix this please
-
My r33 S2 RB25DET has a rough idle after about 10 mins of driving when warmed up. It goes from like 200 RPM to 1000 RPM and some times stalls Ive tried to fix it by cleaning the AFM buying new coil packs and spark plugs. Car is stock apart from pod filter and front mount inter cooler also have a boost leak getting about 4psI could this be linked to the idle by any chance -
NM35 - Putting Back Together Hey everyone, just wondering if anyone can help me. Im putting an NM35 back together (was gutted), I have all the parts here, I'm getting her back together but I'm running into a few issues. My current issue is the heater/aircon buttons not coming on. I plugged everything in and put it in place and I can hear the air coming out, but there's no lights on and I can't change anything. Help??? -
Need help: R32 GTS short circuit (car won't start) 1991 R32 GTS Manual I was cleaning up wiring in my car as almost all r32 wiring is molested, i had took off plenty of old wires that were already cut and not in use and when i finished my car wouldn't start, i checked my fuse box and my shift lock fuse had blown, i replaced it and it had blown again and i could hear a short circuit, i do not know what to do now.
