Search the Community
Showing results for tags 'r32gtr' or 'dash'.
-
Hello everyone. This thread is my Diy/walkthrough of a s15 dash conversion in my r32 sedan I do really like the r32 dash but having an s15 as dream car. The s15 dash has always been the best looking dash in my opinion. Iv had some lazy spare interior parts had gotten the dash i swapped for a part which was cut n stuff for his a31. But long story short. Iv taken the factory one out and chucked in the s15 one in to get an idea.. i havent checked what mount fits or not yet. Ill be cutting my door cards so the door can close also doing my sounds while i have time cause some drivetrain things are broken lol Will keep an update, Now that iv made the thread. Ill try be more indept as i go along also. Cheers.
-
Removed from built motor, hardly used, $500 ONO Belts included, location Melbourne -
Hi Guys, Can someone confirm all the different types of clusters on all the GTR models. Am I correct in saying all the GTRs came with 180km dash clusters? If not can someone explain what models came with different clusters.
-
Hey all first time poster here. I own an r33 and for the past couple of weeks I’ve been struggling to fix a problem with the rev unit. It will either stay completely still while driving or go all jumpy and random (I’ve heard this is notorious for skylines). ive tried replacing the actual rev unit itself to no avail as well as the whole back in to the speedo and rev unit which also hasn’t worked. Ive also cleaned out the connectors that feed in to the rev unit without success. Im completely open to any suggestions on what to do next because I’m out of ideas
-
Nismo super coppermix twin plate clutch kit for sale,complete with flywheel. To suit r32 gtr pull type. Selling due to an upgrade. These clutchs are rated at 500kws at the flywheel and are very easy to use. Lots of meat left on the plates. Pickup Camden pk nsw 2570, retail $2400 selling $1200ono. pm or call 0410993105 -
Hey fellas, so recently purchased a 92 gtst rolling shell and it seem as tho it has an auto dash, it has had an SR and an RB25 in it before has modplates and was last registered with a sr20 in it, so my problem is will i run into any problems when i go too put a RB25 in it? is there anything that can be dodgy about auto conversions that i should check on or is there anyway i can tell if has been? can post pics if need be,Cheers. -
Hi i am after following parts for a BNR32GTR. Hoodlock support bar: Hood lock support bar ABS Sensors rear: ABS Sensors rear I am after new or used only thing it would be correct ones and must work (ABS). Replye your idea of price pls or PM me. This is new register user but i have since start of SAU bein active under other name and now i dont remember my password and cant get in to that mail i had at that time Have sent PM to Christian to see my ways of solving this. So no worrie for just one post member. BR
-
Gents, As the title says I'm looking for the nismo dash cluster with the built-in lcd screen. Any leads will be appreciated
-
Hi Guys, My 08 V36 Sedan has developed an annoying issue with the dash lights. Part of the dash had started to flicker, specifically the 7 - 8 rpm section of the tacho. I see a few people in the US have had this problem but all the threads I have read the person just had it replaced at the dealer. Has anyone had something similar and know how to fix it? Cheers
-
Hey peeps recently just purchased an r32gtr for it to loose compression which I found to be piston rings. Currently tossing up options on rebuilding with forged internals to suit around 450-500kw if I choose to go single turbo down the track or if I should hunt a second hand motor. Just wanting advice on roughly how much a standard rebuild and building a built motor would cost with parts needed. Uploaded is comp results wet and dry
-
Hey All, looking to change my dash lights with blue multi directional LEDs in my R34 GTT. Anyone that has done this switch where did you get your LEDs from and how do you like them?
-
Cheap dash setup for those on a budget, has EGT probe, boost sensor, coolant trmp sensor and an input for a wideband. Control unit wires into your harness and that sends bluetooth info to the dash. Currently in my 300zx with a Link G4+. Located in Blacktown area 2148 nsw Asking $300 ono -
Hey all i have an r32 gtr need bonnet painted or a gun grey metallic colour one. Please email [email protected] Thanks
-
Hey all, It's cold, and i'm tired, and i'm sick of working on my car atm. RB25DET NEO swapper R32 gts-t chassis. Power windows, and the dash (tacho and fuel sender) is not working. Cannot find any wiring diagrams at all for the power windows, i looked through the R32 GTR complete service manual and i cannot find anything for the life of me. Doing shitloads of googling and it seems a few other people on here and GTROC etc etc are having the same issuse. Power windows don't respond to any inputs and they are not getting any power to them. Does anyone have any idea how they get power? It must be pulled from the same spot as the dash gets power from yeah? I will have a look at some wiring diagrams and try and chase it later. I'm just over it at the moment haha Also why is there not an electrical/wiring subforum?
-
PRICE DROP $8500 was 9500 1993 R32 GTR N1 Front bumper 112k km, 3 inch cat back 650cc injectors nistune PODS Filters button clutch recently put in. deep dish steering wheel nismo dash 320km Gauges have been replaced with defi copies in middle gauge cluster Gauges on A Piller. Oil temp / boost Oil Filter Relocation Oil Cooler 4wd torque splitter controller S15 Wheels, 2 with good rubber, 2 meh Alarm system / immobiliser with hidden kill switch Rego till Mid October in NSW Plates included in sale I bought this car a couple of months ago with a "blown head gasket" for more than im selling it for. Turned out that there is some minor scoring inside the bore on cylinder 4 and 5. I currently have it in bits so that any perspective buyer can assess it themselves. It will require it to be bored out a bit or a replacement block (ive seen just the blocks go in good condition between $1000 and $1200. I already have another R32 GTR which just broke at wakefield so my loss is your gain. Id rather be honest about its issue than put it back together and pretend it doesn't have it. The pistons/rods/crankstaft are all in good re useable condition, Car is located 3 hrs west of sydney. BUT to the right buyer i may be able to arrange delivery at a small cost but will need a deposit (i have my own car trailer). I am not after swaps. i need the money to fix my other GTR. as i said my loss is your gain. I was planning to build it as a track car myself. COME AND GET A BARGAIN, All it needs is a replacement block and put it back together and you got a good GTR for CHEAP.. First in with cash get it. I want it gone this weekend if possible.
-
R34 Middle stereo surround, must be in mint condition with no scratches. as seen here
-
Hey i'm after an R33 series 2 dash cluster. Must be between 80 XXX and 90 XXX preferably, or even lower than that! and must be in great condition. Live in Perth, WA, local would be best but i'll see what this ad generates. Also R33 GTR clusters will be considered, as i think theyre a straight swap and the same as gtst???? Cheers -
I have one of those (so called) rare Nismo LCD screen dashes. I'm not really fond of it to be honest, as ive never had the screen working (dont have the required setup). Basically, it came with my car when i bought it from the dealership, and it wasnt working. I noticed the screen behind the plastic casing had a bit of dust on it, so i decided to take it apart and wipe the screen. BIG mistake. ..The screen smudged at the bottom where i wiped, and left a mark which has never gone away. To be honest im not that fussed with all the "fancyness" of the dash, as id rather get a better look at what speed im doing then be looking at a blank screen at the moment. So i was wondering... 1. Is it worth keeping? Can the screen be fixed? And if so what computer/device do i need to run something on the screen? who can install it? or 2. Should i sell it/ swap it (and keep it in storage) with a regular stock R33 Gtst dash? Im not really fussed by the fact the screens got a scratch to it, as right now im leaning towards finding a stock dash with regular kms and swapping it over, still keeping the nismo one. If its worth getting fixed and it can be easily, ill consider looking down that path thanks for any opinions
-
Hey all, Saw a member's R34 cluster and it had a really nice carbon fibre looking bezel / fascia with chrome circles that surround the dash cluster's gauges. Looks mint and really updates the console. Was searching online and I found a person was selling one for an AT back in 2009, other than that I can't even find a picture of it anywhere. If you know where I can find something like this let me know.
-
Various R32 GTST Coupe parts for sale - final clear out of bits and pieces.. Have the following parts from R32 GTST Coupe for sale... please call or text me on 0404 178 585. Located in Brisbane (10 mins nth of city) PRICES (shipping is extra at buyers expense): JDM LED Taillights - as new condition - $120 pair Front and Rear alloy adjustable strut braces - $75 each 3inch straight through cat back exhaust into 2 x 2.5 inch tips, bolts straight onto RB20DET - no mufflers (sounds awesome) - $150 Handbrake and cables linkages etc all complete - $60 Autometer shift light - $50 Front nolothene bushes - $20 each Instrument Cluster with 150k on clock - $40 Rear quarter internal c pillar trims / window surrounds as new condition, perfect vinyl and backing (L & R) - $80 each Rear quarter interior trims / door cards as new condition (L & R) - $50 each Rear seats complete good condition $40 Passenger seat on rails - $40 good condition upholstery Racepro ball valve adjustable boost controller - brand new never used - $80 Racepro BOV - same as Turbosmart Type 2 - brand new never used - $100 (RRP over $250) Headlights - no cracks in glass (H4 Bulb style - selling without bulbs) - $30 each Interior Light - immaculate - $20 Window visors - $20 Front and rear window wipers - $15 each - good condition, no rust Front and rear window wiper motors (both work) - $30 each Rear vision mirror absolutely mint - $25 Air con control plastic cover with buttons - $20 Interior A pillar trims - no cracks - $20 each Plastic R32 Skyline kick panels - $20 each Bonnet release mechanism - $20 Can do full rear cut from A pillars back or cut rear quarters... straight as - pls call to discuss All motor, gearbox, diff, interior (apart from what is mentioned above), wiring, suspension, exterior panels are sold. All prices are ex shipping, pick up from Brisbane (10 mins nth of city). Please call or text me on 0404 178 585. -
Does anyone know of any triple gauge holders you can get for the R34 N/A to sit in the center dash where the little imprinted storage space is? Ive looked at the GTT ones of ebay but it looks like you have to drill into the dash to hold em in. The dash isnt like falcons and commodores where you can unclip the center bit and then the gauge holder will clip in. If there are any where can i get em from, or will i need to get one custom made?
-
Bid of an odd one. Recently Ive heard some strange noises coming from under the dash infront of me somewhhere. It sounds like a combination of noises - whirring motors on and off and some clicking, almost like a solenoid malfuunctioning. There seems to be no effect to the car, things are otherwise working normally but I have no idea what this is. Something is screwing up, that much I know. Any ideas? This happen to you? What could it be? car is otherwise mostlly standard. thanks
-
accumulation of stuff in my way. 1. r33 gtr nismo slave cyl with braided line - $120 2.r33 gtr pull type gearbox- $500 - has been opened at some stage has blue goo sealing it but was working fine in car when removed-no speedo drive 3.550cc top feed injectors sards/denso $250 4.spool h beam rb30 rods- barely used $400 5.r33 gtr front mount stock intercooler $160 6.stock gtr blow off valves and hard pipe-$150 7.nismo g max twin plate(old type) clutch pull type was pulled apart to get rebuilt. needs rebuild. $100 more to come once inspected items located in brisbane, happy to freight all of it except gearbox as it freakin heavy -
hey guys, Sold a few thing on here without much hassle so lets try again this is my SELLING MY SPARE CRAP TO FUND A HOIST SALE. PICS AVAILABLE ON REQUEST, too big to attach.. All located Newcastle NSW, can ship smaller items at buyers expense. Parts all functioning and in good working order etc. all parts have been taken off due to upgrading all priced to sell. this shits cheap. 1) Rb26 2.5" split dump into 3" front pipes. Turbo to cat. flows well. i was making 361kw with this exhaust setup. $250 2) Sard 550cc RB26 Injectors, in prefect working order, ran perfectly on 361kw at wheels. took out as i am running E85 now $250 3) RB26 Stock Blow off valves $80 4) SR20DET Dump Pipe with screamer pipe.. sounds insanely good on gate. $50 5) SR20DET Steampipe manifold, will never crack like the stainless china copies $180 6) Rb26 Twin Turbo Top Pipe, $30 7) 2 x rb26 Intercooler pipes, 1 x top hotpipe and 1 x lower hotpipe $30 8) 19 x 8 wheels +35ish offset from memory, 4x114.3 , with BRAND new china special tyres, these were my defect clearing tyres, still got the little rubbers on the tyre. like seriously 99% tread, $550. looked good on my S13 before i went wide body. -
wheel spacers $50 used only for trial fit oil relocator sandwich plate (new) $50 rb 26 power steer pump $50 works perfect only changed due to my dry sump set needed a rb25 pump mines centre console guages $200 HKS cam gears $225 GTR door trims with tweeters $200 dash vent (new) $50 320km 10krpm dash $250 polished twin turbo pipe $100
