Search the Community
Showing results for tags 'rb25 '.
Found 3 results
-
LS2 coil setup for RB20/25/26 Up for sale is a complete drop in LS2 coil set (8.5mm leads) upgrade for RB25 series II and RB26. It is in excellent working condition. Comes with harness set up already for RB25 series II and RB26 (no ignitor) - plug'n'play. Otherwise any other RB engines with ignitor, you will need to make your own harnessPickup Parklea, Sydney area or post at buyer's expense. $350. 0430 549 303 -
No Longer Available -
R33 S1 popped and banged mid drift, now won't start. G'day Guys, Been around a while and have had plenty of skylines over the years. I have 3 at the moment lol This is about my R33 GTST S1.. Last Friday night I was at QR for drift practice and all was going sweet. Spent about an hour in the seat (Temps good and oil pressure good). Suddenly mid drift the car started popping and banging and started loosing power. It didn't shut off instantly but slowly lost power until it would not register any throttle input and would only idle very very roughly at about 600-700rpm. Soon it died and overtime I went to fire it back up it would run rough for a second or two and die. Since I have changed spark plugs, cleaned AFM, put in fresh fuel, changed fuel filter, checked coils for spark, checked ignitor, checked all fuses. It wasn't blowing any smoke and or using any coolent. No it won't fire at all. Its running a S1 RB25det, APEXI power fc ecu however it didn't come with a hand controller, k&n pod, bigger in tank fuel pump, hi flowed turbo, exhaust etc. Once I changed the fuel filter and plugs I tried cranking for 10sec or so and re pulled a spark plug, however it was bone dry and so was the cylinder. I am getting good fuel pressure to the fuel rail but the injectors aren't spraying for some reason. I removed the CAS and spun it by hand and could hear the fuel pump prime and the injectors click, however only one click per 120 degrees? Im assuming due to 2 cylinders firing at a time. So it can't be a CAS. I know injectors can fail, but all at once seems a bit coincidental? It was running well all night until it stopped and its only been a few days since. Any thoughts would be greatly appreciated
