Search the Community
Showing results for tags 'roller'.
Found 5 results
-
Invented my own guard roller. Made from junk. Saw other ones are an adjustable arm on a plate. but more complicated than mine. Need to finish coat, maybe yellow. May put a longer roller on if i find one. It has adjustable angle, more than youd need both ways. Also adjustable length, by 10mm increments, total 60mm, not much, but good for skylines. Designed for one handed operation, cos you need a heatgun in the other. I havent tried it yet, as the garage is occupied. I will update when i try it.
-
So I thought I'd have a go at rolling the rear guards using one of those cool roller tools, didn't get very far. Basically the inner lip is pretty much horizontal at the moment and I don't seem to be able to adjust the tool short enough to get the roller at the right angle. It's sitting too sharp against the edge of the the lip, which wants to eat into the roller rather than being bent back. See photos below. User error? Any tips? Here's the best video I could find on how to use the roller: And yes I'm heating the lip & paint first.
-
DR30 coupe roller for sale. Current circuit car, I purchased car for driveline, suspension and ancillaries. Car will be sold as a roller with suspension, r180 diff and wheels/brakes out of black 4 door (see pics). Car is set up for an fj20, has no seats, includes bolt in cage, aftermarket gauges. Up close paint is rough and needs some TLC. Some on this site will no doubt know the car. Iron mask bonnet and grill etc. Car can be viewed (Bayswater Vic) as is before having items removed next week, lots more pics available. Tough looking car. $2300 Steve 0438 673 125
-
R33 S2 Roller For Sale R33 S2 Roller For Sale So I started this project, but ended up not finishing it due to injury. Its on the home stretch but Not sure If i can be bothered finishing it now, took about 5 months to get it to where it is now. But honestly have stopped working on it for a few months due to my injury and not sure if i should continue. And honestly the longer it sits it does no justice for it. 1995 (i think) R33 Gtst S2.(can clarify to interested party) Full revs check and paperwork provided. Bought it off a kid who had smacked the front. Car had a ding in the front that has all been repaired, Bonnet and panel replaced, all squared and perfect and checked out. Then the car was completely sanded, straightened all dents and chips removed and any metal work completed. Engine Bay was completely disassembled and prepped and painted (same as Exterior ) Entire Car was a windows out proper pull apart job, completely (inlc jams etc) Sprayed Duxone 2k Light Blue and it Looks mint. (like new!) (we are talking about a 10k) paint job. Also fixed a number of issues with the car to bring it back to perfectly stock condition. Replaced window switches and other faulty items! etc etc to get it perfect. Interior is almost immaculate and the car just needs the following to finish it; Engine + Gearbox + Exhaust + some other small bits. I have an engine for it, its my old stock RB25 which is perfect, I was keeping for my spare. Not sure If i will include it in the sale or not, lets say NOT, but i can if the buyer is really keen and we can work that out. As it is almost complete, just missing turbo, throttlebody, knock sensors, mmm and maybe a few other bits. Happy to Neg, but want to mostly recoup most of the money spent on it, asking 5,500. If it does not sell ill end up finishing it and selling it for 12k min. This is a really nice freshly painted flat GTST, so if you pranged yours or keen on a nice base for a project, this could be what your looking for. 0432 (279) 1 six six. Can post pictures tomorrow.
-
R33 S2 Roller For Sale R33 S2 Roller For Sale So I started this project, but ended up not finishing it due to injury. Its on the home stretch but Not sure If i can be bothered finishing it now, took about 5 months to get it to where it is now. But honestly have stopped working on it for a few months due to my injury and not sure if i should continue. And honestly the longer it sits it does no justice for it. 1995 (i think) R33 Gtst S2.(can clarify to interested party) Full revs check and paperwork provided. Bought it off a kid who had smacked the front. Car had a ding in the front that has all been repaired, Bonnet and panel replaced, all squared and perfect and checked out. Then the car was completely sanded, straightened all dents and chips removed and any metal work completed. Engine Bay was completely disassembled and prepped and painted (same as Exterior ) Entire Car was a windows out proper pull apart job, completely (inlc jams etc) Sprayed Duxone 2k Light Blue and it Looks mint. (like new!) (we are talking about a 10k) paint job. Also fixed a number of issues with the car to bring it back to perfectly stock condition. Replaced window switches and other faulty items! etc etc to get it perfect. Interior is almost immaculate and the car just needs the following to finish it; Engine + Gearbox + Exhaust + some other small bits. I have an engine for it, its my old stock RB25 which is perfect, I was keeping for my spare. Not sure If i will include it in the sale or not, lets say NOT, but i can if the buyer is really keen and we can work that out. As it is almost complete, just missing turbo, throttlebody, knock sensors, mmm and maybe a few other bits. Happy to Neg, but want to mostly recoup most of the money spent on it, asking 5,500. If it does not sell ill end up finishing it and selling it for 12k min. This is a really nice freshly painted flat GTST, so if you pranged yours or keen on a nice base for a project, this could be what your looking for. 0432 (279) 1 six six. Can post pictures tomorrow.
