Search the Community
Showing results for tags 'spacers'.
Found 18 results
-
Hi everyone, I need your help on getting spacers for my GTR. I thinking of adding 10mm or 15mm but am finding it hard getting the right spacers as the centre bore is the exact size as my current wheels so how do I get spacers that will fit my wheels on top? As you can see from the attached photos, I bought a set of 10mm spacers and the centre bore won't fit through my wheels. I've never looked into spacers before so am needing some help. Specs of 10mm spacers that didn't fit were: PCD: 5/114.3 with 66.1mm center bore and 73.1 OD What specs would I need for them to fit? I only need 10mm or 15mm. Thanks all.
-
Got a pair of bolt on spacers. Not hubcentric. in good condition. $100 on the gold coast, will post 0423732991 -
Just have a few bits and pieces for sale from my old skyline. - Brand new carbon fibre front grill, suits series one r33 gtst. - $130 - Brand new carbon fibre mirror covers, suit series one r33 gtst - $100 - Full set of stock wheel nuts suit nissan- $5 - Set of four stock r33/s14 wheels. Two have perfect tread, two are just about on markers. Rims painted black but pretty average job - $170 - Pair of 3mm spacers - $5 - Pair of 5mm spacers - $5 - Pair of 8mm spacers - $8 - Pair of 40mm / 1.5" bolt on spacers - $40 - Skyline Cluster. 190,000k's everthing works fine except the tacho which will only sometimes work. - $10 - Set of 15x6.5+28 4x4 wheels with 31x10.5 Desert Duelers two good tread, two average $400 Located in Qld, Pm or message me for more info/pics. Prices are negotiable. Stuart 0431575051
-
Hi all, Does fitting wheel spacers only on the rear wheels of an R34 GT-R adversely effect the ATTESSA ETS system? Ie - because of the larger rear track at the back... Thanks for any help. -
Hi All, I have a 2005 Auto Skyline coupe with 19inchers with 245/35 profiles. My suspensions are standard and car is not lowered. I want to have a more staunch look so that my wheels come out a bit. I believe the spacers are the way to go. Questions: 1) Would you recommend? What do you guys think? 2) What thickness do i go for? front and back? 3) What types are there and what are the good ones? (mid range?) 4) likely cost at a Jax or bobjane type garages? basically like i said i am more going for wider look but not going outside legal limits. I also would get good ones for safety and dont want my wheel coming off the motorway as it is my daily drive. hope to hear back. I would take your recommendations seriously. My wheels are due for alignment and may get the guys to install these while its there. Thanks JT -
the wheel spacers are 5x114.3 and are 15mm in thickness I also have 20 shallow nuts I am asking $120 for nuts and spacers the 17 inch rim set are d1 racing rims which I plasti dipped flat gold and gloss back. the rims also 5x114.3 wheel pattern. I am asking only $200 for the rims. both the items were on my r33 gtst. please text me 0420458488 -
Have two rb25 engines in pieces. Was going to rebuild into one good one but lost motivation. Parts are Ono. Good rb25 head. Complete with cams, covers, cam gears (random adjustable intake gear) Bolt onto a 30 bottom end and away you go. $200 Average rb25 head. Gunky needs a clean and check. Comes with cams, no covers or gears $100 Rb25 block x 2. $50 each Rb25 crank x 2. $50 each S1 standard coilpacks with loom and brackets. $100 Rb25 sump x 2. $30 each rb25 oil pump. $40 Rb20/25 exhaust manifold x 2. $50 each rb25 inlet manifold. Complete minus injectors. $50 S2 rb25 arm. Worked great, upgraded to z32. $80 Rb20/5 cross over pipe with bob. $50 each Turbosmart boost T $30 HKS SSQ bob. $30 Gktech s13 extended lower control arms. 9 mm longer over standard s13 arms complete and less than 500km use. Great for a track cars to get the extra track. $250 Gktech 4-5 stud 15mm conversion spacers. $80 Rb25 short shifter. $50 Hr31 weather shields. Awesome condition for their age. One slight crack in the plastic, clips still intact. $400 firm Can get picks on request. Can post smaller items at buyers expense. Located in SA in the Adelaide hills. Pie me for more info. Cheers, Adam -
Hi guys - been a while since I've been on here and have an accumulation of used and unused parts from my previous R33 GT-R ownership over 2 years ago. Here are all the items I'm looking to get rid of: Cooling-Pro 76mm GT-R intecooler (new and unused - http://justjap.com/cooling-pro-76mm-bar-and-plate-intercooler-nissan-skyline-gtr.html#): $100 R33 GT-R OEM spoiler with carbon wing (unknown brand) - spoiler has crack under working brake light and missing end-caps: $150 R33 GT-R OEM white wing blade (good condition): $40 R33 duck wing spoiler (does not fit GT-R) - unknown brand: $50 R33 GT-R Carbon 'JUN' style front lip (OK condition with scrapes on underside): $50 Ganador Style Mirrors (Didn't fit my R33 - unsure for what make this is): $50 R33 GT-R Cluster (sticky speedometer needle - 101,824km): $50 NEO TECH Nissan Spacers (5 x 114.3) - 1x pair 20mm, 1x pair 25mm (only used to trial fit - scratches on spacers from removal): $60 pair / $100 all four Items located and can be viewed in St. Albans, Melbourne. Pick up only as I do not have time and looking to sell these quickly. Please feel free to contact me on 0406948342 (calls prior 6pm, msg any time) or PM me here. Prices are firm. Cheers guys. Steve. -
Need size of rb26 hks fuel rail spacers Can someone please measure the two fuel rail spacers that come with the 11mm hks rb26 fuel rails so I can make some , don't want to have to measure as I'd rather leave the old short injectors in it for now until It hits the dyno , cheers mick -
FS pair of 15mm 5X114.3 Hub centric Wheel Spacers Suit Nissan 5 Stud S14 S15 R32 R33 R34 Hi everyone, I got a set of 15mm 5X114.3 Hub Centric Wheel Spacers for sale. They are in great condition, come complete with bolts and nuts and are perfectly straight. I had them on the rear of my GTR but have since bought better suiting wheels so they are no longer needed. Bought them new for $150.00 direct from AF Racing last year, but am taking offers starting at just $50.00 so pick up a bargain. Preferred pick up only but if you can arrange you own pick up and deliver then I'm happy to package them. Please PM me your offers. Product description: This AF RACING wheel spacer is hub centric to suit Nissan’s 66.1mm hub set up, and it is made from the highest quality Billet 6061-T6 Aluminum Alloy, and then hard anodized to enhance the corrossion resistance. The spacer is installed with grade 10.9 extended studs. This wheel spacer is compatible with Nissan 200SX S14, 350Z(2002-2009), 370Z, Cefiro (1995-2004), SKYLINE R32 R33 R34, GT-R, Infiniti G35(2003-2007), G37, FX35 37 45 50, EX25 35 37 30d. - 15mm 5X114.3 Hub centric - 114.3mm PCD with M12X1.25 thread - Billet 6061-T6 Aluminum Alloy - CNC Machined - Grade 10.9, 50mm long studs - Hub centric to suit 66.1mm Nissan hubs Cheers guys. Also listed else where so I reserve the right to cancel as required. -
Hey I am chasing a pair of bolt on spacers for my R33. 5 x 114.3 20-25mm Hub centric pref but WHY Cheers, Emily
-
Time to clear out some parts so I can buy other parts. Location: Brisbane, QLD. Gearbox RB25DET , - $400 F***ing bargain. Still in car. Can test drive until Saturday 8th Nov 12noon (sharp). Then pulling out of car to sell. **Gearbox in working condition, 208,000km. All gears fine, all synchros fine, some bearing noise at idle and slight rattle at 1700rpm. Perfect spare gearbox, probably as good as half the wrecker boxes out there but much much cheaper! Only replacing as I got an amazing deal on a brand new gearbox + tax deduction. Wheels Rays LMGT2 17x8 +32 /17x9 +38 - $500 with tyres. 235/45/17 front 70% worn, 255/40/17 rear Federal 595SS, 5% worn - nearly new. Some gutter marks, outer rim dint on one front wheel. Pics of all 4 wheels can see condition. another f***in bargain considering it includes 2 x almost new rear 255 tyres ! 5 x 114 pattern ECU RB25 socketed with Toshi reflash - $200 Flashed for stock turbo, exhaust, 10psi, etc R&R removed. Got 180rwkw on 10psi with this and FMIC. ECU RB25 stock. - $50 3.5" exhaust - $100 Dint in rear muffler, tiny hole in weld near centre muffler - see pic. Sounded epic but now changed to quiet system. King spring rear pair KDRL-61SP - $50 Excellent match to Tein front springs Tein Spring S-Tech front pair - $50 4.1kg/mm 35mm drop. Excellent match to King springs rear pair. Brake Pads QFM Comp 9 pads DB1170 [NEW] - $70 ($179 new) Fit skyline, S14/S15, WRX. Never fitted. New in box. Spacers 10mm GKTECH hubcentric [NEW] - $30/pair Have 2 pairs. Trial fitted, never driven on, new in box. Wheel studs GKTECH extended [NEW] - $15/pair Never out of boxes. Two boxes, 13.0mm & 14.3mm both 78mm length Centre bearing suit R32/Cefiro [NEW] - $40 ($120 at JustJap). NP-30-6250 In box, never fitted. Told it fit R33 but it doesn't. Water Pump RB30/RB20 Powermax/GMB brand - $20 Doesn't fit RB25 due to missing bolt space, added silicon then removed, never torqued down, never run. Gates timing belt - $50 [virtually new] Fitted, ran for 30mins, took out as too noisy. Replaced with stock nissan belt. Car was near stock and quiet at the time and probably just needed to adjust tension I found out later. AFM RB25 - $20 Series 2 RB25, used. Stock 370cc injectors (x6) - $40 Used. {oops didn't take a pic.} They look normal. RB25DET R33 stock radiator and shroud - FREE ! Radiator condition unknown - hence free, shroud good. -
Hey guys, Just clearing my stuff out, planned on using them but never did. Prices are slightly negotiable. Item 1: Pair of Rays 17x9 rims with 265 Bridgestone RE01 tyres, unknown offset, has a bit of dish Condition: Needs a clean but in very good condition. Rattle canned black. Price: $200 ono Item 2: 15mm Neotech hubcentric Spacers, suits Nissan hub. Condition: used but in good condition Price: $80 ono Item 3: Replica Nardi 330mm deep dish steering wheel Condition: Near brand new, used for a week then upgraded to genuine 350mm Price: $80 ono Item 4: R33 s2 silver boot and s1 silver wing. Condition: Very good. Boot has no lock Price: $50 ono Pics to come. Located in SW Syd, prefer pick up but can ship steering wheel and spacers. Cheers, Mike -
Spacers Consensus on running a small 3mm slip on hub centric spacer to gain some clearance to the shock tower to allow a little more camber? Stock S13 wheel nuts, haven't measured thread engagement just yet. 4 stud car so finding wheels is painful.
-
R34 / Skyline parts + wheels Selling the flowing parts off my R34, have no need for them so need them gone. 1. King of vertex rep steering wheel - $150 2. Gktech 20mm spacers (pair) - $70 3. AF racing 30mm spacers (pair) - $90 4. Riverside zepter mesh wheels, 17x8, 5x115.4, average condition, tyres only really good for skids/track - $900 5. Pirelli Cinturato p1 tyres, good tread (pair, 215/45/R17) - $200 6. Custom coilovers (pair, eyelet type); 10kg - $1000 7. Bilsteins Springs and shocks (pair, fork type) - $250 8. Stock R34 suspension (pair, fork type) - $100 Located Lower North shore Sydney. (can post at buyers expense) Any questions just pm me -
[SA] Child restraint bolt spacers Hey guys, I removed the parcel shelf on my R34 a while back to work on the speakers, and in the process I seem to have mis-placed a couple of the child restraint spacers that go between the parcel shelf, and the bolts, etc. Anyone have a couple of these, or know where I could pick them up cheap? Thanks.
-
Set of 4, 5x114.3 25mm hubcentric spacers Selling a set of 4, 25mm 5x114.3 centre bore 66.1 hubcentric spacers for Nissans. I've used them to fill in the gap on my r34 gtr. They are good quality spacers. From memory, they are made from billet machined aluminium, and the the studs and bolts are from some kinda super strong metal... I did quite a bit of research back then because i didn't want my wheels to fall off! Price is $100 ono. Western Suburbs Victoria. Call or SMS 0422 804 252, or you can PM. Thanks for looking! -
I have a pair of 45MM Hubcentric Spacers for sale! They are of a very high quality Stud pattern is 5x114.3 $120 ono Come get some cheap stance for your shitty offset wheels
