Search the Community

3071 Turbo built by MMP Made 300kw on 18~19psi for 4ish years trouble free. (Stock rb25 neo, e85) T3 Flanged 90degree ally elbow Dump included and will suit a high mount 6 boost rb25 4an oil feed 10an drain 6an water feeds pickup sydney nsw or will post anywhere $350

have two rb alternators i was keeping as spares one works fine, the other would suit a reco. $50 for good one. $20 for other one. prices are firm. dont bother trying to get $10 off. ill just keep them if no one has use for them. can post $15 anywhere in aus. chatswood sydney 0419469108 thanks

The perfect example of a reliable and well-maintained Australian delivered S15. The last model built by Nissan Australia in July 2002. Your chance to own one of the last of the last. I am the 3rd owner after originally being purchased by a Qantas employee under a corporate fleet program. I have used the vehicle as a weekend car. The vehicle is a 6-speed manual with 129,800kms and registration until 13th December 2012. The vehicle has been serviced every 5,000kms using top-shelf oil from Royal Purple engine, gear and differential oils. The performance of the SR20DET engine has been improved using quality aftermarket parts and all of which have been installed professionally to maintain a standard appearance; • Front Mount Intercooler (Greddy) • 3" Turbo-Back Exhaust with twin tip muffler. Very Stealthy.(Custom) • Cold Air Intake + Pod Filter (Apexi) • Lowered Sports Suspension (King) • High flow fuel pump (Walbro) • Coil Packs (Splitfire) The vehicle also comes with a few interior extras including; • Genuine GT Spec Leather Seats • Kenwood Head Unit for CD/MP3 Playback, Auxillary In + Front Usb Port • Kenwood 6x9" Rear Speakers & Clarion 5" Front Splits • 3-Point Alarm with Immobiliser approved against Australian standards The vehicle has also received the following brand new parts; • Exedy Sports Organic Clutch w/ Single Mass flywheel • 2 brand new tyres • RDA rear brake rotors + brake pads I am only selling this vehicle as looking to invest in the property market. Please feel free to contact me with any questions or for an inspection. Price $16,000 ONO Please contact Brian on 04 two two 789 078.

Hey guys, Looking for $16,000 obo. Regretful sale. I had intended to ship the car with me back to Canada, but I would have to wait until October, which is not possible. Some people around the forum know me, and know I'm a mature guy who takes good care of his car and doesn't drive like a hoon. I have owned this car for 2 years, from 97k to 120k. The suspension is solid and feels great, and the car has been modded in order to come on boost early. Makes ~220 rwkw. Dyno'd at 197 by Tunehouse before I put the coils and the cat. I have made sure she is nice and quiet, stealthy, and she hasn't given me any notable problems. All engine work done at Tunehouse, all suspension done at Heasmans. Features: - Full 100k service done at 97k after buying the car (Gates timing belt, tensioner, water pump, fluids, etc.) - turbo back exhaust with 3" bell mouth dump/front pipe, 3" 100 CPSI Venom metal race cat, 3.5 to 4" cat-back - Turbosmart manual boost controller @ 10psi - Splitfire coilpacks - HKS pod filter with Hi-octane racing prototype shielding (my car was used for their ebay ad) - HKS Hipermax III coilovers, height and damper adjustable - Turbo has 47k, and plenty of life left - Fully wired up sound system, top of the line Sony equipment 4-way 3.5" fronts, 12" competition sub, with pioneer 4-ways 3.5" in the back. - New SRI tie rods, and alignment done yesterday. - Full impul "inspired" bodykit - +25mm vented front guards - 350z anniversary wheels powder coated to match - New 52mm radiator Super bonus: - 4x 255x35x18 Federal 595 RS-Rs with 70%+ tread Bad: - Rear bar and front bar have paint chips from a less than stellar spray job

As above, need an rb25 aac valve unit and power steering reservoir bracket. In sydney

Hi guys, I've got an as-new condition HKS Hi-Power cat-back exhaust for sale. Good for anyone with an R33 GTS-T/GTR that wants a nice-sounding but not illegally-loud system. Fitment is perfect and exits the rear bar with a nice angle to it. Canon tip has been optioned with the Titanium-look finish. I'm selling this system with less than 400km on it, my GTR's a pure weekend car and it rarely gets driven at that. This system is in Stainless Steel. and was bought approx 2-3 months ago. Item: HKS Hi=Power cat-back exhaust Size: 3.7 inch piping Material: Stainless Steel Location: Sydney, Eastern Suburbs Cost: $900 Condition: As-new, comes in original Box. Contact: Matt 04000 23241 Here's some pictures: Cheers guys!

Item: BBS Nuts in black, 20 pieces, 1.25 thread, no lock nuts Price and Conditions: Used, $80 Pictures: Location: Sydney Post: add $10 anywhere across Australia

Hi all, Moving out real soon and have been instructed to clean out the garage. Heaps of quality stuff here, all needs to go real soon so prices are cheap cheap! 1. For sale: JC Project BR6's. 19x9.5 19x10.5 +22 all around. 235f and 255r tyres with good tread Price and price conditions: $700 Condition: Decent. could do with paint if bothered or finish polishing front lips (i got bored). One small buckle on one of the rear wheels (see pic) Pictures: 2. For sale: Work Stitch Meshies. 18x9 18x10. Cant remember offset but i think in the 30's (plenty of dish on these babies) Price and price conditions: $1500 Condition: Good condition. Centres are sandblasted ready for paint/powdercoat etc. all wheel bolts and centre caps included!!! Pictures: 3. For sale: R33 GTST/R32GTR front brake callipers/discs and pads (great upgrade for your sil) Price and price conditions: $350 Condition: excellent. Plenty of meat left on pads and discs. Comes with retainers etc Pictures: none but can take some if keen 4. For sale: 350z OEM style carbon bonnet Price and price conditions: $400!!!! Condition: Brand new, however fine scratch on surface (should be buffable) Pictures: 5. For sale: 350z Vertex Full body kit Price and price conditions: $450!!!!!! Condition: Brand new - needs to go you wont find a cheaper kit Pictures: 6. For sale: 350z N1 front lip Price and price conditions: $30 (YES $30!!!!) Condition: brand new, however slightly warped PU plastic. Been told heatgun can fix it up when fitting so should be no biggie! Pictures: 7. For sale: Nardi 330mm deep corn suede leather replica Price and price conditions: $120 Condition: brand new, comes with horn and wiring. excellent quality Pictures: 8. For sale: Takata 4pt Harness replica Price and price conditions: $120 Condition: brand new. Excellent quality Pictures: 9. For sale: Nissan OEM S15 strut bar (yep OEM) Price and price conditions: $120 Condition: good condition, has a few stickers but removable Pictures: 10. For sale: VW passat front underspoiler/lip Price and price conditions: $50 (2x available) Condition: Brand New - needs to go just sitting here Pictures: looks like this once fitted and painted 11. For sale: Project Kics Hyperblack Wheel nuts m12x1.5 (suits hondas and toyotas) Price and price conditions: $150 Condition: Brand new Pictures: Needs to go real soon so prices are cheap cheap!! all parts pick up from green valley contact me on 0431 083 394 if intersted. cheers, John

got this greddy turbo timer also does some other stuff, works fine. still has complete harness, with plugs, but will need to be wired in. $70 neg can post anywhere in the world for $10 sydney 0419469108

Hey guys, clearing out my garage and listing things as i come across them. 1- r33 gtst airbox/filter/snorkel - $50 picked up 2- r34 GTT tein HA coilovers complete set. from memory i THINK the rears may have a knock $100 picked up 3- r32/33/34 gtst Greddy return flow Intercooler (Core only). damaged but holds boost fine (was running 265rwkw with no problems ). $100 picked up. 4- r34 gtt complete factory front and rear control/link arm set- $100 picked up. 5- r33 factory side skirts- $50 picked up 0403 558 930. pick up from Condell park Sydney. will list more things as i go through the Garage.

stewart wilkins adj castor arms for DR30/R30 may fit other nissans, i.e r31, early datsuns have near new super pro bush (at most 4 months old) heaps of adjustment, these were the best thing i ever did to my car, made a huge difference to how it drove/handled free delivery anywhere in australia after $200. neg 0419469108

Looking for lowered springs or coil overs for my r34 gt-four. I need gtr springs as it is also awd, and the rears are fork type btw. Feel free to contact me! Raymond, 0404232880 thx

Need a set of 225/45/18 ASAP sydney will pick up. Just need to get car onto trailer. re treads, half worn, gime gime gime

pair of dr30 6 bolt drive shafts. both in good cond for age. also have two shafts that have movement that will be thrown in and a couple of other bits and pieces that u can make another good pair out of. 2 of the shafts have near new boots on them which were $120. i also have the intermediate shaft if some needed this , say if u have a 1600 etc theses will also fit na z31 $200 the lot 0419469108

ive got some Hr31 companion flanges, these are four bolt i may be able to supply hubs aswell if needed. hubs will be 4 stud. (extra $) $80.00 posted anywhere in AUS. or pickup sydney 0419469108 photos can be sent via phone, cannot upload for a few days

Hey Guys, Selling my Garret 2860-5 turbo kit , this includes everything and anything i dont need from my twin set up including standard manifold and Tomei dump pipes kit has done around 1300-1500ks made around 413awkw but have seen this kit make up to 420awkw, a great RB26 upgrade if your looking for more power. will deliver almost the same power as some of the big single set up , turbos are in great cond and powertune can verify this as ive had them inspected. also willing to throw in my rochester 1000cc injectors as im also going to upgrade these. Price: $3000 ono location: Sydney Reason for selling: Upgrade will have pictures of turbos and parts up shortly , please feel free to pm me if you have any questions , not separating parts at this stage

cp pistons 86.5mm. yep these are brand brand new!!! comes complete with pins, rings the lot even the stickers!! brand new in the box!! id been collecting parts to build a tough rb but now need cash so i can drift more grab a bargain. my loss ur gain. need a quick sale price is neg. these cost me $1200 . $750 neg. hit me up sydney nsw can post ne wher 4 $18.90 regesterd post 0419469108

greddy catch can $50 could do with a polish rb25det cam covers $70 water meth pump 150psi top condition its a coolingmist $70 fuel rail rb25det $40 contact by pm

Howdy, Up for sale I have 2 tyres for sale size is 265/35/18. Brand is Achilles ATR Sport. These tyres came with a second set of skid rims i bought. I dont need these tyres and dont have room for them, so they are up for sale. Tyres have around 90% tread left. See pics below. Pickup is from North Sydney. Price is $200 for the pair Send me an email to andymoocow at gmail.com or call 0409 585 191 No time wasters please guys.

Hi everyone, It is with much saddness that I am selling my R32 GTST. I am selling because i cannot afford to keep the skyline as well a a 180 as a drift car. The R32 has served me well, though it has a few issues which will mean the buyer will need to invest some TLC into it. It is missing the heater core - it went to auto elec who removed the core because it was broken, but they didnt replace it. It also has a fuel leak at the cylinder 4 injector. - which should only require a new o-ring. Otherwise it runs well, and is really nice to drive. It has some minor body damage, (photos included below) with some minor rust around the rear passenger side tail light. i have owned the car for about 2 years, and have enjoyed it immensely. its rego will expire on the 31st July 2012. I am asking $6,500 but will negotiate in person with any interested buyers. The car is currently located in Thornleigh, (north west sydney) but it may move to Lidcombe/Aurburn (west ish Sydney) because it is beginning to take up space at home. I can be contacted on 0439405778 or at [email protected] or you can send me a PM here. Now pictures: damage to rear passenger side taillight damage to front bumper - drivers side. scrape to front bumper - passenger side.

Hey guys, I've got a copy of Assassin's Creed Revelations brand new still in plastic. I bought it by accident (was meant to buy it for PS3) $25 pick up from Sydney Postage at buyers expense.

Hey guys, I've got a manual, white series 1.5 R33 Skyline for wrecking in Sydney. It's been smashed up the back, so the boot, tail lights, etc are gone. The front end and everything else is all good though. It had a few mods on it (power FC, Greddy fmic, splitfires, etc) these are listed up here ! Further pics available on request Pickup available in Sydney or I can post almost anything at buyers expense. PM me or reply if you're after anything random pieces or anything listed not listed here Aftermarket parts: Apexi Power FC & hand controller to suit R33 Gts-t rb25det, immaculate condition - $1100 firm posted Greddy FMIC & piping kit, suits R33 Gts-t. Great condition, no damage, includes all pipes and hose clamps - pickup only! $450 ono SF-DIS-005 Splitfire coil packs, suits S1.5/S2 R33 Gts-t (with no ignitor) and R34 GTR - $400 Greddy Catch can - $70 Trial side skirts, great condition, pickup only ! - $250 ono SARD fuel pressure regulator & speco gauge - $80 Greddy front strut brace - $100 ono JIC front coilovers, good condition - $250/ pair KYB rear shocks with lowered King springs, good condition - $150/pair 17x8 and 17x9" AVS model 6 wheels and tyres. All are 5x114.3, +35 offset. Fronts are 8" wide, rears 9". The two rear tyres are pretty bald, and the front 2 are pretty low, just above tread markers. They were on the above car and will fit great on most/all skylines, or anything with the above stud pattern - $650 ono Also have a set of 18x7.5" MKW forged wheels. All are 18x7.5" 5x114.3. The offset isn't printed on them but they were on a R33 gts-t, so i'm assuming around +35. Front tyres are good, about 70% thread, the rears are not as good at about 25% - $600 ono 3" stainless steel catback exhaust (Greddy I think?) - $350 Turbosmart Boost Tee valve - $40 Standard parts: The engine has 155,000k's on the clock and was running perfect - well looked after by previous owner. I did a compression test and it came up great - approx 155-160psi on all cylinders - $1000 ono for the bare engine 5sp manual Gearbox is also in good condition - $1200 for the box & tailshaft, or a whole manual conversion kit can be arranged for 1500 Exterior Stuff: Series 1 chrome headlights, great condition - $250/pair Series 1 bonnet - $150 Series 1 reo bar - $120 Front guards - $75 each Front bare nose cut/radiator support - $150 Front bumper and grille are SOLD side mirrors - $40 each also have a set of stock standard R33 wheels with good tyres - $200 and a set of standard side skirts & rear pods - $150 ono for the set Engine bay stuff: Radiator - $80 Aircon condenser - $125 S2 Rb25det engine loom - $150 R33 aircon compressor - $100 R33 power steering pump - $100 R33 alternator - $90 Engine Mounts - $80/pair Fuse box lid - $20 Radiator overflow bottle - $20 BM44 ABS brake master cylinder - $60 Brakes/driveline: Front calipers - $275 Rear calipers - $140 Front rotors, used but good condition - $50/pair Rear rotors, used but good condition - $50/pair Castor rods with urethane bushes - $75 Front lower control arms - $70 ea Front upper control arms - $50/pr Front 5 stud hubs - $50 each Rear lower control arms - $40 each Rear 5 stud hubs - $140 pair Handbrake drum assembly incl cables - $150 pair Manual (4.11) rear diff - $150 Driveshafts $75 pair Spare space saver wheel - $50 Also have a full set of standard suspension - $150 Interior: Complete set of floor mats, good condition - $80 S1 Front seats, immaculate condition (seat covers all their life) - $150 ono / pair Complete set of S1 door trims, immaculate condition (x4 pieces) - $100 Passenger side window motor - $50 Drivers side is SOLD dash instrument cluster, approx 155,000km. everything works well on it - $100 S1 airbag steering wheel, some wear around the top edge - $80 Instrument cluster surround (S2) with all switches/vents - $80 Centre console - $50 Seatbelts (full set) - $80 Ignition barrel + door barrels & key - $80

for sale are the standard wheels and tyres of my r34 gtt 3 of the wheels are in great condition, one has a few marks looking for $400 ono pickup is available from old toongabbie 2146

Hi all, I've decided to get into a V35. Anyone have one for sale? I'm looking at 2003 or newer models, must be a coupe. I'd prefer something with none, or not too many mods. Must be registered and all import compliances etc in order. Going rate seems to be 14-17k, so something around here is good. I'd prefer to buy in Syd, though will entertain offers from surrounding areas - Wollongong, Newcastle, etc. Let me know what you have!

Hey guys.. I'm looking for a R33 GTST Manual Turbo Cluster (my revs aren't working past 3k if you know how to fix it please help) and also a catch can kit for my RB25DET, it's a non abs model so if I could get a can that fits in that area that would be great.. Also if anyone knows which catch can type is better (pros and cons) please let me know, between vented and non vented. Thanks!!