Search the Community
Showing results for tags 'throttle body'.
Found 9 results
-
like the title says, I am asking for clarification as what stock throttle body should be used when putting front facing intake on r34 gtt rb25det neo engine? (shortest type possible, but stock size, proper electrical and cable connections and wont alter run-ability, as the stock r34 gtt is simply too long, as it has dual "baffles" traction control, type throttle body.) I know I 've seen this info below but couldn't locate it. r33 rb25det non neo? gtst? series 1, 2? -
considering a different direction for my build so for now i might sell my plenum and tb Greddy style front facing has been ported and faced, was painted but been sanded back im about to prime i was going to paint gunmetal grey already has throttle body adapter tig welded on. $340 Matching 80mm throttle body with TPS $140 $440 for both will get pics in the next couple days -
RB25DET PARTS All that is in the picture, direct all question to my email address [email protected] with the words "skyline parts" in the subject line. http://i858.photobuc..._1/SAM_0384.jpg PRICE IS ONLY $120 ono. I live in bridgeman downs 4035 area. Maybe able to deliver, i work in indooroopilly. * top and bottom plenum * throttle body * sump * oil pump * water pump * exhaust heat sheld * crankshaft sproket in excellent condition * 5x pistons, in excellent condition. * oil strainer * intake and exhaust cam grears. * rear oil seal housing. Dont have any other parts available. Cheers for looking guys
-
Hey guys, I've recently installed a greddy style front facing plenum, FMIC, 80mm throttle body and oil cooler. I started the car up and it idles normally... good start. Unfortunately, when I gave it some throttle, the revs build then drop and build then drop. Not good. I'm getting fault code 55 "ALL OK". Could anyone shed some light on what I should look at to get this sorted? 20211103_113935_1.mp4 -
Hi guys, does anyone know the different angles of the throttle butterfly valve with respect to the rpm range of the engine? I also need to know the air flow rate with respect to the rpm of the engine. The engine must be a rb25det, preferably running with stock turbo, stock boost and stock intake manifold. I know most of the info can be obtained by consult software like Ecutalk, but I don't have access to a consult cable. I need the info for some CFD work. Any help would be much appreciated! Sam -
Hi guys, does anyone know the different angles of the throttle butterfly valve with respect to the rpm range of the engine? I also need to know the air flow rate with respect to the rpm of the engine. The engine must be a rb25det, preferably running with stock turbo, stock boost and stock intake manifold. I know most of the info can be obtained by consult software like Ecutalk, but I don't have access to a consult cable. I need the info for some CFD work. Any help would be much appreciated! Sam
-
Hi. Hopefully not been covered before. Have a r34 auto coupe. Was originally turbo,now engine replaced with a series 2 rb25de engine. Problem we are having is the TCS/slip lights come on after start up and seems box is stuck in 3rd gear. Reverse and neutral are fine. Bit of head scratching going on. Ecu is for auto. Only thing we can think of is throttle body with sensors are different. Engine was from a manual car. Can anyone shed some light on this please?
-
Anyone selling Q45 Throttle Body? Hey i am After a VH45 Q45 Throttle Body for my r34 front facing plenum, thankyou
-
Hi I'm looking for rb26 throttle bodies only (x3) . Need for single throttle conversion so damaged or leaking ones will be fine. Please pm me if u have some thanks.
