Jump to content
SAU Community

Recommended Posts

First you use the search button :)

You will find this feature very useful for alot of questions about your car.

In the past month there has been a plethora of threads opened about r33's and oil changes and what oil to use, some I think even include pictures.

Most use Motul Turbolight 10W40 or similar, and the oil filter is a Z145A (Ryco).

Nath

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1822804
Share on other sites

The how to:

http://www.skylinesaustralia.com/forums/in...showtopic=10035

I used Motul 300V Chrono 10/40 - quite expensive but it held oil pressure much better than any other oil i've used before and the engine ran very quite and revved quite freely. The cheap Ryco filters are fine to use.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1826542
Share on other sites

How do you say its fantastic.  Most oils are fine.  Dump it at 5000km and replace it.  Its only after years of running you will know if the oil is great or not. 

Oil pressure on the stock gauge seems to be similar for most kinds of oil with my car..

It might be bs but i've noticed that different oils seem to lend different qualities to the motor - like make it run smoother and quieter, but thats just me...

Each to their own i guess, i would run a thinner oil if all i used the car for was round town work but my car gets heavy highway use and many hours stuck in peak traffic, so i wanted something that would give protection at the upper thermal range, and also with my car on 103,000km i doubt the clearances are what they used to be, so i opted for a thicker oil....in terms of protection you're right, i wont know for a while, but i do know that its working great sofar as nothing has broken yet :)

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1828554
Share on other sites

Coz I just recently put Valoline 20w-50 XLD premium on my r33 gtst?

Arghhhhhhhhhh *Screams*

Please take the advice of the other guys and do not use cheap oil in your R33. It is worth every cent if you spend a little more each time you do an oil change.

Nath

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1829841
Share on other sites

I reckon any semi synthetic that is from a reputable manufacturer will do the job. If you're religious with your 5000km service I wouldnt worry too much. If you extend it to 10000kms Id go full synthetic. I rather take the cheaper oil dump more often approach..probably in japan our cars were getting an oil change every 15-20k kms. 10k kms if by the book. As motors get older therre is more importance in doing the regular changes. It is all the unburnt hydrocarbons and petrol related products that get into the oil that cause further degradation of seals etc and decrease the effectiveness of the oil in lubricating.

Edited by benl1981
Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1829854
Share on other sites

I doubt any damage would be done by using thicker oil (20w-50w) but if youve got a newer engine you may as well take advantage of using higher quality thinner oils like 5-40 etc.

If youve got a bog stock rb30e with 200+ on the clock you wouldnt want to use anything other than 20-50 however due to the clearances rings etc being worn. Too thin oil will cause the motor to lose compression due to it slipping past the rings etc.

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1832330
Share on other sites

Motul 4100 and a Ryco filter every 5,000km is all you need to know really :O

benm i will spank you if i catch you putitng turbolight in your new GTR. 4100 is a very cheap oil and is not a full synthetic oil. it is a blended oil. go at least for the 8100, but i would say use the Chrono 300V.

I've used the castrol forumla R 10W60 and personally i think it's too thick. a good full synthetic around the 10W40 area is what you want.

Link to comment
https://www.sau.com.au/forums/topic/100015-oil-change/#findComment-1837837
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Means something is not set up right, tune/calibration related.  
    • Finally replaced the previous temporary mesh indicator surrounds (temporary was the last 10+ years 😂) with a 3D printed GTR style version for the front indicators. I think it looks a lot nicer than the old setup and at least the indicators now point in the correct direction rather than angled off. Needed a little bit of tweaking to deal with the intercooler piping but got there in the end. Old and new photos below. 
    • It's weird to me that you say this because I'm pretty sure locals with relatively standard standalone tunes (boost/barometric compensated alpha-N) still have driveability issues when they pop intercooler hoses. Maybe with enough data I can just train some kind of model that spits out an expected grams/cyl given every sensor input except MAF like what FCA did with their Pentastar 3.6 ECU logic. Basically stock everything. The main motivation honestly is to have a sensor that can be a decent baseline source of truth. In scenarios you're describing obviously it won't work every time but it seems to me the number of corner cases that exist in MAF load is maybe not as severe and difficult to manage vs ITB alpha-N with some MAP/barometric compensation.
    • What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
×
×
  • Create New...