Jump to content
SAU Community

Recommended Posts

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

Hey mate,

I pm'd you in regards to a airbox will take one of the complete aloy ones if you have one ready i need it immediately please pm with details. Will this cover a rather large trust pod filter.

Regards,

Daniel

Unfortunately after a whole night of umming and arring... I am saddened to say that this box will not fit the R34GTT :) Main culprit preventing this is the radiator overflow bottle which is in the way big time.

I really can't be bothered hacking away at this thing to make it fit as I'm quite sure the finish would not be satisfactory. I'll just make up my own box ~ I will however comment on the quality of this item by Mr_Crust, excellent value for money in my opinion!

Anyways, if any of you guys are in need of one for the R33, I have one available (clear top in polycarbonate). Only one available as I no longer need it, contact if interested. All other enquiries to Mr_Crust please :D

Guys, if anyone is after one of these boxes for an R33 (w/ clear polycarbonate lid), please let me know.

I purchased mine earlier this week from mr crust, but unfortunately it doesn't fit properly on my car as I have a new turbo and the hose to the afm isn't as long as the std item which means the pod doesn't sit fully within the box. I don't really want to fork out extra cash to replace a perfectly fine hose (I only did the upgrade a few months ago), so it's available if someone would like to purchase it.

I will also comment that the quality of this product is well worth the money in my opinion. I'm just dissapointed that I couldn't get it to fit! :D

Anyway, I'm located in Sydney, please PM me if you're interested. All other enquiries to mr crust :D

Guys, if anyone is after one of these boxes for an R33 (w/ clear polycarbonate lid), please let me know.

I purchased mine earlier this week from mr crust, but unfortunately it doesn't fit properly on my car as I have a new turbo and the hose to the afm isn't as long as the std item which means the pod doesn't sit fully within the box. I don't really want to fork out extra cash to replace a perfectly fine hose (I only did the upgrade a few months ago), so it's available if someone would like to purchase it.

I will also comment that the quality of this product is well worth the money in my opinion. I'm just dissapointed that I couldn't get it to fit! :iluvff:

Anyway, I'm located in Sydney, please PM me if you're interested. All other enquiries to mr crust :(

Bump - need to sell :P

  • 3 weeks later...

OK guys, as it stands at the moment ive got 4x clear air boxes made and 1x aliminium, this will be the last of them. So if you have any intrest just PM me or post it up in this thread.

price is still $120 which includes the delievery via express post

  • 4 weeks later...

nemz: sorry mate, i have nothing to suit an r32.

habibz_r33: i will Pm once i sort a few of these orders out.

as for all the PMs i have replied..

Edited by mr_crust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...