Jump to content
SAU Community

Recommended Posts

I have owned both auto and manual cars in the past, and for around town driving the auto wins. But once you hit the twisty stuff (whether roads or the track) the auto becomes a royal pain in the arse. I prefer a manual simply because of this, and I just put up with the rowing through the gears around town.

If I commuted in heavy traffic in my car I would seriously have considered an auto instead. But auto boxes in general are a sloppy bitch and I prefer to tell the gears what to do directly. Since my car is mostly a weekend warrior there's no sense in it being an auto.

If you are just looking to improve quarter mile times though, stick with the auto. No sense changing the box one way or the other just for that, unless you are aiming for sub 11's or so. In which case the auto with high stall is better.

This Thread was started on " 07-02-2003" try and not bring up threads that are almost a year old. Cheers

sorry redlineGTR I disagree...why start a new thread and say the same things all over again?

Better to dig up an old thread from the dead and continue the discussion

Couldn't agree more Duncan.

As for an Auto versus Manual,,,the manual has to win but only if the cars a daily driver. Who in there right mind would want to drive around the streets with a 3500 stall converter. My neighbours got a 11 sec commodore and it's nothing but a pain in the arse. He actually loves my Skyline only because it's not revving it's head off ALL the time.

Also BMW's SMG M3's while being an auto shifting manual are slower over the 1/4 than the H pattern version and a lot more troublesome.

Neil.

Also remember that the BMW, Alfa, Ferarri and Maserati systems are clutchless manuals, not automatics with up/down buttons.

Personally I think there is a world of difference between the two, autos are far slower to shift....and whats the point of an auto if you always shift it manually.

I'd take the bettter control any day.

Hi guys, it is so much easier and cheaper to build a 9 sec car with an auto. Easier because you can have a narrower per band. Cheaper to buy ($5k versus $17K) and cheaper to maintain as it is much gentler on the rest of the drive line.

In a circuit race car I couldn't even consider an auto.

In a road car, well if I drove only in traffic all the time, then I would have to consider an auto. But I don't, so its a manual for me.

So horses for courses you might say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lol a few are like that with no intention of being reborn unfortunately. 
    • Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...