Apexi Pfc Boost Control Kit Not Working

[NateR31]

and i have no idea why, i disconnect the stock solinoid, hose from turbo to solinoid,and from solinoid to a nipple made on the piping to the t/b. map sensor hooked up, all wires hooked up, the map sensor is working, i turnd boost kit function on, but no matter what its only running ..40-.50bar. The kit came with the pfc so i thought i mayaswell use it. any ideas why its not working?

[Robo's]

What have you set your boost on with your Power FC hand controller?

[NateR31]

0.80bar

[SAMFISHER]

Is the solenoid working? If it is it should make a distinctive clicking/ticking noise when it starts making reasonable boost.

[paulr33]

we figured out why it was not working. the previous user had the solenoid attached to the map sensor loom. there are two versions of the boost control kit

3 pin plug powerfc

map sensor runs to 3 pin plug

boost solenoid runs to stock boost solenoid on car (r33 gtst has this)

5 pin plug powerfc

map sensor runs to 5 pin plug

boost solenoid piggybacks onto map sensor harness to the other 2 pins on the cable