Jump to content
SAU Community

Recommended Posts

looking to get a cage ive purchased fitted to my gtr (hks 6 point i think). have a few questions to ask as ive read some articles on here about this:

1. will i have to remove my rear seat as a result of having the cage?

2. in qld, are u allowed to have a full cage, i think its 6 point? in a street registered vehicle?

3. is a mod plate all u need to pass the rwc?

is there anything else i should know before trying to fit the cage??

thanking you all in advance :P

Link to comment
https://www.sau.com.au/forums/topic/100219-roll-cage-fitting/
Share on other sites

Yes

No (probably) Definately not in NSW

No you probably cant register it

Basically the front 2 points of the cage will make it illeglal since there is no protection for the drivers head against the bars.

Only rally rego allows a full 6 point cage. You need a 4 point "half cage"

you have to remove the back seat to fit it, but you can put the seat back in. not that easy to get back in though. i have a cusco t point cage and it is possible. however, it really destroys the shape (the foam) when you take it out again. having the rear cross bar made it worse for me.

i have full cage throughout my car. welded in. not bolted in.

went to get bluey - guy requested i get intrusion bars cut and shuffled to be removable. and pad the rest of cage. he said this would be enough for bluey.

i says ok..10mths later i havent done anything bout it.but anyway there is my experience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I steam cleaned my near new set of volk gtc wheels 14 years ago and farrkkked them lol. The clear coat cracked like spider webbing in several areas. Lesson learnt don't do that. 😭
    • If you don't touch the CAS, then you're fine.
    • Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
×
×
  • Create New...