Jump to content
SAU Community

Recommended Posts

Hey guys,

Is it worth rebuilding my own RB20DET in my R32 or would i just be better off going and getting a semi-stock RB25DET and putting in in my car.

In terms of the power output which engine is the better one to work?

Can RB20DET after market performance parts be picked up easlily in Australia?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/100446-modified-rb20-vs-stock-rb25/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

I keep breaking rb20's so i went to an rb25 and have not had any issues at all...

Remember for power vs dollars spent it goes like this

1. RB30det/t

2. RB26det/t

3. RB25det

4. RB20det

I mean if you have a 20 then go to the 25 if you have a 25 and want more go to the 26 and if you have a 26 and want more then go a built 30....

Know what i mean....

Its such a matter of personal preference and what you want. If i had $5,000 to spend on a mostly stock GTST i wouldnt bother with an RB25. At best you will end up with 200rwkws and probably have less average power then if you put a 2530 on your RB20.

If money really isnt a problem, or killing an RB25 not that scary a proposition then you really cant argue against going for the biiger displacement Nissan engine, as its not as though they are scary engines liek the 5.4L Ford V8 which dynamincally arent good engine.

...as for strength, give me a std RB20 over any other RB engine. If your killing RB20s then i would be so bold as to say its not the negines fault but the drivers, as they take an absolute hammering, provided you keep an eye on temps, fluids etc

I keep breaking rb20's so i went to an rb25 and have not had any issues at all...

Remember for power vs dollars spent it goes like this

1. RB30det/t

2. RB26det/t

3. RB25det

4. RB20det

I mean if you have a 20 then go to the 25 if you have a 25 and want more go to the 26 and if you have a 26 and want more then go a built 30....

Know what i mean....

i woulnt put the 26 cheaper than a 25, my 26 im building now is costing a LOT more than my RB25 did <_<

your question is wether it's worth REBUILDING an Rb20 or buying an RB25?

out of those 2 options only, I'd buy a 25.

however, I say that if you have enough money to BUY and fit and tune an RB25, you have enough money to build, fit and tune an RB30det.

which ofcourse is my pick of the RB engines.

LOL, i read that, and i took it as

"I have the choice of rebuilding my RB20 in order to aquire enough power to put my car into outer orbit...or buy a std RB25 and have to wait for my neighbours dog to take a piss on a wild daisy, then another two days for it to die so that the power of a std RB25 would allow me to remove this weed from my lawn"

So i didnt think there was anything broken about the std engione?!?!?! But i am struggling with English since Xmas NYE celebrations

rb20 rebuilt with a larger turbo should provide some significant fun, not to mention with the money saved on a rebuild rather than buying a rb25 you will KNOW the exact condition of the motor and can go from there.

when you buy a used motor you are taking a gamble, it might last it might not its hard to say.

i swapped a rb20det into my s14 as here in the us we got shafted and got a 2.4l which makes 155bhp, and even tho i blew the rb20 i have no regrets and am in the process of building it back up.

i'm with ash..rb20's are crappy.. ok up to a certain point, but after that not worth spending too much money on them.

modded rb20 good highway cruiser from 100-200km/hr.. but amongst town I'd almost prefer an rb30E :)

your considering rebuilding your RB20 because it popped? Isnt that enough to steer clear and UPGRADE to RB25?

400rwhp is easily achievable and streetable on a RB25 as opposed to a RB20, I guess it depends how far you wanna take it...

Edited by _8OO5TED_

Getting a stock Rb25 is called "headroom" ;op

Even if it is as quick as a modded RB20, you can easily mod the RB25 and get much more out of it.

I recken you could chuck RB25DET NEO in the list there... stock 206kw for a few more dollars. =-]

The only people that will tell you an RB20 is any good are the owners that are either in denial or haven't seen the light of the larger displacement RB motors. :)

I don't care if you have an RB20 with a T78, give me a stock RB25 anyday, way more fun!

The again, there is only two real RB motors,

1. RB30DET (do it with cubes)

2. RB26DETT (do it with revs)

:)

See the light of the above motors and don't look back :)

RB20 was probally good for the jap taxi's though ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
×
×
  • Create New...