Jump to content
SAU Community

Recommended Posts

I'm moving house soon so I need to get rid of all this stuff that I don't need. Car was written off ages ago and I still have all this stuff left.

Items: All the following items are from a 1992 R32 GTS-T type M

Rear Seat (grey in colour) - Condition is good. It's been in the garage so it's a bit dusty but has no marks or tears as far as I can remember - $50 ono

Boot Lid with spoiler - Metallic Black in colour. Excellent condition, just dirty - $50 ono

Fuel tank - As good as a fuel tank can be. Comes with stock fuel pump still installed :blink: - $20

Front lip spoiler - Black. (Fibreglass) Hooks onto the bottom of the stock front bar. I never used it, I got it with the car. - $50

Stock Rear Bar - Metallic black. Excellent condition. Has reverse lights in it still. - SOLD

Passenger side front quarter - Metallic black. Slightly bent near where the door goes but shouldn't be too hard to fix - $20

Roof trim for inside - grey colour - $40

Stock Intercooler - no piping with it, but the cooler is fine - $20

Side skirts - Black in colour - Stock ones that came with the type m series. One has slight damage on one end where you bolt it on. Can maybe be fixed, I don't know. - $40 for the pair or make me an offer. - SOLD

Power window & mirror controls (for driver side door) - Excellent condition - $50

Various little bits and pieces such as rear view mirror (inside one), instrument cluster (with the tacho, speedo etc on it) about a gazillion nuts and bolts and a few other bits that I can't think of right now.

And the big bit is the whole rear half (shell only) of the car. Contains all 3 rear windows (main one and the two little ones on the sides) and some internal trim pieces. If no one wants the whole thing then I'll chop it up, but I'd rather get rid of the whole thing at once. Panels are straight. Also has rear wiper blade still :)

UPDATE:

I also have the whole rear sub frame - $100

Shocks listed before (i thought they were stock) are actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much - $250

Location:Sydney North Shore

Reason for Selling:Moving house, everything has to go

Price and Payment Conditions: Cash on pickup. No reasonable offer will be refused. If I don't sell it, it's probably going to the tip.

Extra Info: I can take pics if you want, but I don't see any need to take photos of a stock rear bar or stock rear seat etc.

Contact Details: I don't get to check these forums much as I don't use the net much at home and can't do it at work. Best calling or smsing me on 0418 233 525, or email me at [email protected]

I'm very reasonable so make me an offer on these things, you might be suprised at what I'll accept for most of this stuff!

The following things that are sold/destroyed. Please do not ask for them:

Wheels, brakes and hubs (and spare tyre)

Motor and gearbox

Front seats

Doors

Panels not listed

Steering wheel

Handbrake lever and cord

Thanks guys.

Sam

Edited by SamBo
Updated the original post with some prices as I want people to know how cheap this stuff is.

By all means, make me an offer though.

Prefer pickup only.

Ill take the front lip at $50, if you are willing to ship to melbourne,

I can organize courier etc...

Ill wait for the pics tomorrow. then if youll ship i can DD funds straight away..

Pics have been emailed

Not sure about shipping. I'd rather sell stuff locally, the big bits anyway, but we'll see.

Edit: Added Power window & mirror control console (for driver side door) to original post.

Edited by SamBo
Razorsharp, what part of the trim were you after? I have some bits of the boot trim but not all.

hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

I have the boot carpet and piece under carpet too.

I also have some bits of trim from inside the boot, but it's not in the best condtion really.

The carpet is grey in colour.

If you want to come and have a look, please let me know

PM sent re springs and shocks

PM replied.

Sorry, I originally thought the shocks were stockies. They're actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much.

Updated original post with price on the shocks. Added rear sub frame to list of available items too.

Cheers,

SamBo

u woulnt happen to have a lh bonnet hinge, rear windscreen(with wiper motor hole) and the left hand quarter glass?

cheers

I don't have the hinge, but do have the rear windscreen and quarter glass. They are all still part of the whole rear half of the car. May chop it up and separate for the right price though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
×
×
  • Create New...