Jump to content
SAU Community

R32 Parts For Sale In Sydney - Mega Cheap

SamBo
 Share

Recommended Posts

SamBo Enthusiast

SamBo

Posted
Posted (edited)

I'm moving house soon so I need to get rid of all this stuff that I don't need. Car was written off ages ago and I still have all this stuff left.

Items: All the following items are from a 1992 R32 GTS-T type M

Rear Seat (grey in colour) - Condition is good. It's been in the garage so it's a bit dusty but has no marks or tears as far as I can remember - $50 ono

Boot Lid with spoiler - Metallic Black in colour. Excellent condition, just dirty - $50 ono

Fuel tank - As good as a fuel tank can be. Comes with stock fuel pump still installed :blink: - $20

Front lip spoiler - Black. (Fibreglass) Hooks onto the bottom of the stock front bar. I never used it, I got it with the car. - $50

Stock Rear Bar - Metallic black. Excellent condition. Has reverse lights in it still. - SOLD

Passenger side front quarter - Metallic black. Slightly bent near where the door goes but shouldn't be too hard to fix - $20

Roof trim for inside - grey colour - $40

Stock Intercooler - no piping with it, but the cooler is fine - $20

Side skirts - Black in colour - Stock ones that came with the type m series. One has slight damage on one end where you bolt it on. Can maybe be fixed, I don't know. - $40 for the pair or make me an offer. - SOLD

Power window & mirror controls (for driver side door) - Excellent condition - $50

Various little bits and pieces such as rear view mirror (inside one), instrument cluster (with the tacho, speedo etc on it) about a gazillion nuts and bolts and a few other bits that I can't think of right now.

And the big bit is the whole rear half (shell only) of the car. Contains all 3 rear windows (main one and the two little ones on the sides) and some internal trim pieces. If no one wants the whole thing then I'll chop it up, but I'd rather get rid of the whole thing at once. Panels are straight. Also has rear wiper blade still :)

UPDATE:

I also have the whole rear sub frame - $100

Shocks listed before (i thought they were stock) are actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much - $250

Location:Sydney North Shore

Reason for Selling:Moving house, everything has to go

Price and Payment Conditions: Cash on pickup. No reasonable offer will be refused. If I don't sell it, it's probably going to the tip.

Extra Info: I can take pics if you want, but I don't see any need to take photos of a stock rear bar or stock rear seat etc.

Contact Details: I don't get to check these forums much as I don't use the net much at home and can't do it at work. Best calling or smsing me on 0418 233 525, or email me at [email protected]

I'm very reasonable so make me an offer on these things, you might be suprised at what I'll accept for most of this stuff!

The following things that are sold/destroyed. Please do not ask for them:

Wheels, brakes and hubs (and spare tyre)

Motor and gearbox

Front seats

Doors

Panels not listed

Steering wheel

Handbrake lever and cord

Thanks guys.

Sam

Edited by SamBo
Mr.DrriifffttoO Apprentice

Mr.DrriifffttoO

Posted
Posted
Updated the original post with some prices as I want people to know how cheap this stuff is.

By all means, make me an offer though.

Prefer pickup only.

Ill take the front lip at $50, if you are willing to ship to melbourne,

I can organize courier etc...

Ill wait for the pics tomorrow. then if youll ship i can DD funds straight away..

SamBo Enthusiast

SamBo

Posted
  • Author
Posted (edited)

Pics have been emailed

Not sure about shipping. I'd rather sell stuff locally, the big bits anyway, but we'll see.

Edit: Added Power window & mirror control console (for driver side door) to original post.

Edited by SamBo
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted
Razorsharp, what part of the trim were you after? I have some bits of the boot trim but not all.

hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

SamBo Enthusiast

SamBo

Posted
  • Author
Posted
hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

I have the boot carpet and piece under carpet too.

I also have some bits of trim from inside the boot, but it's not in the best condtion really.

The carpet is grey in colour.

If you want to come and have a look, please let me know

SamBo Enthusiast

SamBo

Posted
  • Author
Posted
PM sent re springs and shocks

PM replied.

Sorry, I originally thought the shocks were stockies. They're actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much.

Updated original post with price on the shocks. Added rear sub frame to list of available items too.

Cheers,

SamBo

SamBo Enthusiast

SamBo

Posted
  • Author
Posted
u woulnt happen to have a lh bonnet hinge, rear windscreen(with wiper motor hole) and the left hand quarter glass?

cheers

I don't have the hinge, but do have the rear windscreen and quarter glass. They are all still part of the whole rear half of the car. May chop it up and separate for the right price though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Potential MAP Reference Point

      By GTSBoy · Posted

      Getting a decent signal from all 6 throats is a challenge. I don't know for sure, but I suspect that the stock balance tube is not ideal for it. I have done it on an ALFA 4 cylinder (about 35 years ago, so don't ask for too many details). We drilled 4x holes in the manifold runners, put in some fittings and ran hoses to a decent sized (I think it was about 20mm diameter) pipe that ran the length of the inlet manifold. So, it was quite a decent volume. There is a "tuning" balance to be found between the volume of the common plenum on such a thing and the diameter of the pipes running from it to the runners. You need the volume to be large enough to damp out the sharp spikes in pressure signal you get as each runner gets sucked on by its cylinder, but not so large that it becomes too slow to respond to actual changes in MAP. And you need the hoses to be small enough to transmit the signal quickly, but not so small that they delay the signal. You might have to have more than one go at it, if there isn't any actual success based wisdom to be had here. Hopefully there is. Anyway, I would not do it on only a couple of cylinders. I would also not care about "permanently modifying a part". Just bloody drill holes and make stuff better. There is nothing sacred about any GTR unless it is a genuine museum piece that you shouldn't be modifying at all anyway.
    • MBS206
      NC MX5

      By MBS206 · Posted

      He's still joining you, he's just delayed it and won't have the fulleh sick ITBs...
    • Kinkstaah
      R34 GTT front hood lip

      By Kinkstaah · Posted

      The strange thing is this is a URAS front bumper (or clone of it). The bumper actually does not sit flush with the GTT hood - You need the addon to make the hood 'long' enough to reach the bumper. I have no idea why they didn't incorporate this piece into the bumper itself.. instead of sticking it to the hood instead.
    • AdiR34
      R34 GTT front hood lip

      By AdiR34 · Posted

      Another thought on this OLD topic: When you paint your bonnet lip, leave a small unpainted back lip/line along the back of the lip, where it rests on the bumper. That way, the line in the back is much more prominent than the gaps in the front/under the lip - and it breaks the hood-to-bumper connection at the "correct" place, when comparing to a GTR. I'm gonna do this with mine this week, so stay tuned for pics!
    • Radical_Goodspeed
      Potential MAP Reference Point

      By Radical_Goodspeed · Posted

      So I'm in the final stages of assembling my single turbo RB30/26 and had a question regarding MAP reference points.  I've seen several recommendations such as tapping the cylinder 2/3 ITB, tapping the intake manifold at cylinder 2/3, or using a point on IAC. First two are doable but require permanently modify part and the third is "out" as I plan to delete the IAC.  All that to say my question is can I used the "bleeder" in the center of the ballance tube as a MAP Reference? I'm running a catch can so I don't need it for the PCV system. My thought process is it "pulls" from all 6 cylinder, and it's between the ITB and the cylinders making it ideal for MAP reference according to what I can find. Thoughts?
×
×
  • Create New...