Jump to content
SAU Community

Recommended Posts

Searched, coudlnt find much but i want to add 34gtr rims to my 33gtst.

Ive already had the front lipped back.

Basically the furthest ive gone was 18x8.5+30 which filled nicely... Im adding another .5inch on the front, with the same size rubber, ie 235/40...

My question...

Scrub issues, what can I expect? Can I expect no scrub issues like I did with my 18x8.5+30, or some scrub issues?

Bear in mind, my car is quite low, and I like it that way, and no way am I turning up the height!!!

Any info would be nice if someone has done it before

Regards

Jason

Link to comment
https://www.sau.com.au/forums/topic/100651-34gtr-rims-on-r33-gtst/
Share on other sites

Ok so i went to try some bnr34 wheels on my gtst today... My gtst has the gaurds lipped back, aswell as adjustable castor bushes with the most castor possibl dialed in..

Running a 235/40/18r rubber, and my car is FARRRKING low, slight scrub full lock going into a ditch shaped driveway, ie worst case scenario...

Driving normally, hard locks etc, no scrub...

I will post pics tomorro when I do some in the daytime.. Till then, my reporting is that bnr34 wheels are the bomb!

That looks awesome mate! I always wanted to put R34 GTR rims on my Series 2, but wasn't sure if they would fit! My car is also lowered but I don't think it is as low as yours! May reconsider rims for my car :(

Congrats on the wheels and the overall look of the car!

Thanks for the comments... the rear runs 235 but thats what came with the rims, therefore ill be slapping on some 265 as there is still abit of room in the rear...

But ya, my car sits low, and i prob want it lower in the front a tad more which ill do this week. Still no scrub issues after driving 3 days on them and definately great wheels.

However if you wish to do these rims on your ride, you must lip back the front gaurds and possibly dial in some more castor by using castor rods that are adjustable, or adjustable castor bushes as I have the bushes and dialed in the most possible.

Here is a few more dodgy pics

post-8103-1136616679.jpg

post-8103-1136616743.jpg

Hey mate, that photo was taken at a friends house, and he has a white 33 with a similar kit, but white AV6 Model 6 rims in 18inch...

hehe, so only one gtst... BNR34 wheels are quite yum :P they grow on you and stick out nicely from the gaurds, not to overdone, but just nice :P

No dramas what so ever on full lock... It runs tein HA coilovers, but the backs are wound down all the way and I drive like that all the time... The fronts are wound down abit, but the front of the bar is approx 10cm off the ground, its either 10 or 11cm from the front of the front bar... I like it low tho ;) I want the back bit lower, but need to get coilovers that go lower :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 95 is just a scam outright. 98 is the real "premium" with all the best detergents and other additive packages, and at least historically, used to be more dense also. 95 is just 91 bargain basement shit with a little extra octane rating. Of course, there's 91 and there's 91 also. I always (back in the 90s early 2000s) refused to put fuel in from supermarket related fuel chains on the basis that it was nasty half arsed shit imported from Indonesia. Nowadays, I suspect that there is little difference between the nasty half-arsed shit brought in by the "bargain" chains and the nasty half-arsed shit brought in by the big brands, given that most of it is coming from the same SEAsian refineries. Anyway - if there's still anything to that logic, then it would apply to 95 also. 98 is only made in decent refineries and, as I said, is usually the "premium" fuel, both in terms of octane rating and "use this because it's good for your engine because it's got the unicorn jizz in it!".
    • Yeah since those first 2 replies I actually went and put some 98 in it and tbf it's already doing much better than the 95 (which is weird and makes my inner tinfoil hat wearer think the 95 was a crap batch), getting 8ish around town. Again, wonder if it takes a while to stabilize if the fuel is changed a couple of times. I swear cars used to just either run "well" or "s**t* in my 20s, none of this fuel optimisation business haha 
    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
×
×
  • Create New...