Jump to content
SAU Community

6.5" Splits In The Doors Of My R32

Medium Dave

By Medium Dave,
in Car Audio & Electrical

 Share

Recommended Posts

Medium Dave Proficient

Medium Dave

Posted
Posted

I got them in there in the end, but for all the hassle, I would recommend you just put in some 5" drivers - unless of course I am the only one to have such problems, I could be wrong. Has anyone else done this? and how difficult did you find the placement? I made up some pods to fit in the original location and built the speaker mount on an angle to fit behind the stock grille and clear the glass. i can scan in the templates for the bracket if anyone is keen to have a go :O oh and it sounds great btw, doing it yourself is so rewarding - sounds twice as good :P

Link to comment
https://www.sau.com.au/forums/topic/100701-65-splits-in-the-doors-of-my-r32/
Share on other sites
Medium Dave Proficient

Medium Dave

Posted
  • Author
Posted (edited)

Hmm, I have been having a bit of a look, and I think my woofers are just really quite deep is why I had so much trouble... they are the Jaycar - response kevlar splits, mabey taking a ruler out and doing some reaserch would have saved me some frustrations :worship:

Thanks guys, now could someone please pass me a slice of that humble pie... ;)

Edited by Medium Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      Nice, let me know how you find the 98 tune
    • GTSBoy
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By GTSBoy · Posted

      Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
×
×
  • Create New...