Power Steering Belt Replacement. On Rb26dett

[markimak]

Hey,

this will be my first topic. hope its in the right section.

my P/S belt is on its last legs.. looked it over very frayed.

ok i cant see a tensioner. u got

Crank - P/S pump.. no idle tensioner. so the P/S pump has to have a tensioner. unfortunately i cant see one? is it under the airbox? hot pipe intercooler?

just want to knw the quickest easiest way to get the belt off..

any help would be great guys.

mark.

[dan_32gtr]

hey bud..

the adjuster for the p/s pump is on the underside of the pump itself there is a 12mm lock bolt (faces the same way as the motor) that you need to undo maybe a turn or two just to get some slack, then undo the adjuster bolt, also 12mm i think (its maybe 3-4inchs long and faces the side of the motor).. and loosen the adjuster bolt as well as pushing the passenger side of the pump down to slacken the belt.. viola!!

all of this is easier if you have the rubber intercooler hose and airbox pulled out (if its stock/ish)...

good luck mate