Jump to content
SAU Community

Ill Be In Kawana Next Weekend


nytrda
 Share

Recommended Posts

Hey guys just wondering where the good lappin spot is up there, I no the area pretty well. il be there next weekend im my cefiro so if anyone wants to go for a drive one of the nyts id be up for it. Cheers Jamie

Link to comment
Share on other sites

Hmm it's all pretty dead except for Thursday night, which is normally emo's in their Mom's VT falcadore, and Magna's driving around anyway, and Sunday which is the lapping day, usually mid to late arvo, get a pretty good varity most times, more and more people from Brisbane seem to be coming up now as well.

The Police are seriously low on their quota, so watch out for bullshit fines.

Link to comment
Share on other sites

yeah mooloolaba/alex is the lap. just go up to alex hill and pull up and see if any cars drive past , that would be your best bet. most locals dont go out cruising on week nights, only thursday, bcoz of late nite shopping at the plaza, it seems to bring a few ppls out.

Link to comment
Share on other sites

thanks guys i will go for a trek sat arve an see what happens. well if no1 goes out lappin where is the best spot to go out

go to wharf tavern (old fridays) at the wharf in mooloolaba on tuesday nites, they have 2 dollar tuesdays, but its not what the name states. lol and also on thursday nites they have buderim tavern which is uni nite. other than that go to bar 240v in the main street of mooloolaba, and there is omalley's irish pub, or if u wanna just got for a few drinks on the deck during the day go to kawana hotel, just near the kawana shops. i live in kawana also so u mite see my car around.

Edited by 85URK
Link to comment
Share on other sites

im stayin in units, rite on the beach, im comin up from port macquarie

argh ok. u will be staying near my house then. the units will be called either surfside or beachside apartments most likely. what colour is your ceffie?? , il keep an eye out for u. mines a white R33gtst with the plates 85URK (berserk)

Edited by 85URK
Link to comment
Share on other sites

It's strange that we don't run into each other very much 85URK - I live only a street or two away from you!! :worship:

yeah i know, not entirely sure where u live, but i know its round my way, and u have probably drove past my house a million times. also i saw u today in caloundra driving near the matilda servo. i was getting sum stuff with my boss for work.

Link to comment
Share on other sites

hey man surfside say there all the time, the cef is purple with a huge kit on it shouldnt miss me lol. Seen a few lines go past aswell as a couple of 180s go past. Come up 2 or 3 times a yr,

Link to comment
Share on other sites

hey man surfside say there all the time, the cef is purple with a huge kit on it shouldnt miss me lol. Seen a few lines go past aswell as a couple of 180s go past. Come up 2 or 3 times a yr,

cool good stuff, u are staying like 2 streets from my house lol anyway have fun while u are up here, hopefully see u round. :) Daz.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey Matt, Link pointed to the 2x IGN power sources from the car as a likely issue, and sure enough pin 31 in the loom does not have power when IGN is on (24 does). So at the ECU, (and this is probably the case for R32 as well as C34) most of the ECU loom goes through the firewall behind the blower motor and there are 2 plugs (of 3 in the junction box) which go up and under the dash, the third plug heads under the carpet to places unknown (likely a body to dash loom joint) So, I started to follow that problem through yesterday. Like Johnny (and R32) I assumed that power was supplied through the 2 connectors near the left headlight so I spent some time pulling the intake etc off and cleaning of 400,000klm of dirt and oil leaks and checking those pins, but there was nothing related to the engine parts or ignition fuses there (and no purple with white trace wire in either side of the connectors) Given that the wire didn't seem to go via the engine bay, I then checked there is continuity from Pin 31 to the second connector to confirm no wiring issue in the ECU loom (it looked likely, given how much that has been hacked up over the years!). The pin marked with the purple dot is the other end of the wire to Pin 31 Then I check for IGN power in the dash loom side of that connector with the key on. Nothing. Given that loom goes up and underneath the top of the dash there is no tracing it without taking the dash out, so I went to the driver's side to see if I can find the other end of that (I'm expecting to get to big body junction boxes after I pull enough apart). However, to get to those functions, I had to pull the covers off the drivers side, I'm pretty sure the problem is in this pic Yep, factory remote start (bottom right), local immobiliser (middle) surrounded by 20 years of butchery. Plan is to totally remove the remote start and immobiliser (I think I will lose remote central locking temporarily as a result) to remove all the suspect stuff given I have other more modern security in the car It's gonna take a while, and it is both cold and uncomfortable out in the shed, not looking forward to it.
    • Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
×
×
  • Create New...